1564 models · 293 series
261nm CW DUV Laser
5 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Optical noise | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Cooled method | Power supply (100-240VAC) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture 1/e2 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-261-LN | 261 nm | 1~800 mW | – | – | – | <0.003 nm | <0.5% | Noise <1% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-261 | 261 nm | 1~10 mW | – | – | – | <0.2 nm | <2% | – | TEM00 | <1.0 | – | – | – | – | >10000 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | – | – | – | Datasheet |
| UV-DP-261-A | 261 nm | 10~100 mW | – | – | – | <0.2 nm | <1% | – | Near TEM00 | <3.0 | <10 | – | 10-35 | – | >10000 | – | >100:1, Vertical (Horizontal optional) | – | – | – | Air Cooled | PSU-DP-A | – | – | – | Datasheet |
| UV-DP-261-B | 261 nm | 100~1500 mW | – | – | – | <0.2 nm | <0.5% | – | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | – | – | – | DC-1kHz; TTL and Analog optional | – | – | – | – | – | Datasheet |
| AO-S-261-H | 261 nm | 1~15 mW | 1~15 uJ | 1 Hz-1 kHz | ~9 ns | – | – | – | Near TEM00 | – | <10 | – | 10-35 | – | >10000 | – | – | – | – | – | – | PSU-AOM-DL | <5%, <3%, <2% | <2 | <1.5 | Datasheet |
266nm CW DUV Laser
29 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Mode-locked all fiber pulsed laser at 266nm | M2 | Polarization ratio (dB) | Delivery fiber length(cm) | Cooled method | Fundamental Frequency | Delivery fiber length (cm) | Power stability (rms, 4 hours , ±3°C) | Beam diameter at the aperture (mm) | Polarization ratio | Power supply (100-240VAC) | Beam divergence, full angle (mrad) | Beam diameter at the aperture 1/e2 (mm) | Power stability (rms, 4 hours ± 3°C) | Operating voltage(VDC) | Operating temperature | Jitter (ns, sdev) (optional) | Pointing stability over temperature (urad/℃) | Beam diameter (mm) | Power supply (24VDC) | energy | Power supply (110/220VAC) | High energy diode pumped all solid state | pulse | features of high single pulse energy, short | monitoring, | Jitter (ns, sdev) | Expected lifetime (pulses) | Energy stability (std dev/mean) | Ave power stability (rms, over 4 hours) | 1064/532/355/266nm Transverse mode | Cooling method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-266-B | 266 nm | 1~1500 mW | – | – | – | <0.2 nm | <0.5% | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-266-PS | 266 nm | 1~10 mW | 0.02~0.5 nJ | 20-50 MHz | <10 ps | – | – | – | – | <15 | – | 15-35 | – | 12V/11.5A | >10000 | <5%, <3% | Pulse duration (ps) / <10 | <2 | >15 Horizontal (Vertical optional) | 60 | Air cooled | Forth harmonic | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-266-Pico | 266 nm | 1~50 mW | 0.05~500 nJ | 100 kHz-20 MHz | 50-900 ps (fixed) | – | – | – | – | <15 | – | 15-35 | – | 12V/11.5A | >10000 | <5%, <3% | – | <2 | >15 Horizontal (Vertical optional) | – | Air cooled | Forth harmonic | 60 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-266-Nano | 266 nm | 1~50 mW | 1~500 nJ | 100 kHz-1 MHz | 0.5-50 ns (fixed) | – | – | – | – | <15 | – | 15-35 | – | 12V/11.5A | – | <5%, <3% | – | <1.8 | >15 Horizontal (Vertical optional) | 60 | Air cooled | Forth harmonic | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-Q-266 | 266 nm | 1~30 mW | 0.1~3 uJ | 3-12 kHz | ~1.3 ns | – | – | Near TEM00 | – | <5 | – | 10-35 | – | – | >10000 | – | – | <2 | – | – | – | – | – | <5%, <3% | ~1.0 | >50:1, Horizontal (Vertical optional) | PSU-Q-FDA/PSU-Q-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-Q1-266 | 266 nm | 10 mW | 10 uJ | 1 kHz | ~1 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-FN-266 | 266 nm | 1~15 mW | 1~8 uJ | 10 Hz-3 kHz | ~0.6 ns | – | – | Near TEM00 | – | <5 | – | 10-35 | – | – | >10000 | – | – | <2.0 | – | – | – | – | – | <5%, <3%, <2% | ~1.5 | – | PSU-SR | ~6.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-266-LP | 266 nm | 1~15 mW | 1~15 uJ | 1 Hz-1 kHz | ~0.4 ns | – | – | Near TEM00 | – | <5 | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | – | <5%, <3%, <2% | ~2.0 | – | PSU-S-LP | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-266-HP | 266 nm | 6~100 mW | 1~80 uJ | 10 Hz-100 kHz | ~0.4 ns | – | – | Near TEM00 | – | <5 | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | – | <5%, <3% | ~1.5 | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-266 | 266 nm | 1~10 mW | 1~5 uJ | 1 Hz-5 kHz | ~4 ns | – | – | TEM00 | – | – | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | – | <5%, <3% | – | >100:1, Horizontal (Vertical optional) | PSU-AOM-DL | – | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-266-H | 266 nm | 1~20 mW | 1~20 uJ | 1 Hz-1 kHz | ~9 ns | – | – | TEM00 | – | – | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | – | <5%, <3% | – | >100:1, Horizontal (Vertical optional) | PSU-AOM-DL | – | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-266 | 266 nm | 1~30 mW | 1~12 uJ | 1 Hz-10 kHz | ~8 ns @2.5 kHz | – | – | TEM00 | – | <10 | – | 10-35 | – | 12V/29A | >10000 | – | – | <1.2 | – | – | Air cooled | – | – | – | – | >100:1 Horizontal | – | <3 | – | <3%, <2%，<1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-266A | 266 nm | 100~200 mW | 4~7 uJ | 20-200 kHz | ~10 ns @30 kHz | – | – | TEM00 | – | <10 | – | 10-35 | – | 12V/25A | >10000 | – | – | <1.2 | – | – | Air cooled | – | – | – | – | >100:1 Horizontal | – | <3.5 | – | <2%,<1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-266 | 266 nm | 200~400 mW | 60~80 uJ | 1-10 kHz | ~15 ns @3 kHz | – | – | TEM00 | – | <10 | – | 10-35 | – | – | >10000 | – | – | <1.2 | – | – | Air cooled | – | – | – | – | >100:1 Horizontal | – | ~3.5 | – | <3%, <2%,<1% | 12V/25A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-266W | 266 nm | 500~2000 mW | 10-15 uJ | 50-200 kHz | ~10 ns @50 kHz | – | – | TEM00 | – | <10 | – | 10-35 | – | 24V/13A (AO-266W-I) / 30V/18.6A (AO-266W-II) | >10000 | – | – | <1.2 | – | – | Water cooled | – | – | – | – | >100:1 Horizontal | – | <1.5 | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-266W-HE | 266 nm | 1000 mW | 100 uJ | 10 kHz | ~12 ns | – | – | TEM00 | – | <10 | – | 10-35 | – | 24V/20.9A | >10000 | – | – | <1.2 | – | – | Water cooled | – | – | – | – | >100:1 Horizontal | – | <1.5 | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532& 266 | 266 nm | 1~3 W & 200~400 | 500~1000 uJ & 60~80 uJ | 1-10 kHz | ~10 ns @3 kHz | – | – | – | – | <10 | – | – | – | – | >10000 | – | – | <1.2 | – | – | Air cooled | – | – | – | – | >100:1 Vertical | PSU-AOM | <4.5 | – | <2%, <1% | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-266-RS | 266 nm | 1~50 mW | 1~40 uJ | 10 Hz-10 kHz | ~1.3 ns | – | – | Near TEM00 | – | <10 | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | – | <5%, <3% | – | – | PSU-EOM-DL/PSU-EOM-L (optional)5 | – | ~1.5 | – | – | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-266W | 266 nm | 3000 mW | 60 uJ | 10-100 kHz | <5 ns | – | – | TEM00 | – | <10 | – | 15-35 | – | 24V/31.1A | >10000 | – | – | – | – | – | Water cooled | – | – | – | – | >100:1 Vertical | – | <1.5 | – | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-266-G | 266 nm | 100~500 mW | 4~100 uJ | 1 Hz-25 kHz | <9 ns @1 kHz | – | – | – | – | <15 | – | 15-30 | – | – | – | <5%, <3% | – | – | – | – | Air cooled or water cooled | – | – | – | – | – | – | <3 | – | – | – | – | – | <20 | ~1 | PSU-EO-G (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-266-Subnano | 266 nm | 1~100 mW | 1~100 uJ | 1-5 kHz | <2 ns @1 kHz | – | – | – | – | <15 | – | 15-30 | – | – | – | <5%, <3% | – | – | – | – | Air cooled | – | – | – | – | – | – | <5mrad | – | – | – | – | – | – | – | – | diode / pumped / all / solid | PSU-EO-Subnano | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-266-N | 266 nm | 100~500 mW | 4~150 uJ | 1 Hz-25 kHz | <5 ns @1 kHz | – | – | – | – | <15 | – | 15-30 | – | – | – | <5%, <3% | – | – | – | – | Air cooled or water cooled | – | – | – | – | – | – | <3 | – | – | – | – | – | <20 | ~1 | PSU-EO-N (24V/13A) | – | – | Rep. rate / 1Hz-1kHz / 1-7kHz / 1-25kHz / 1-3kHz2 | energy, / short / pulse | – | – | – | – | – | – | – | – | Datasheet |
| EO-266-P-Subnano | 266 nm | 2~220 mW | 1~110 uJ | 500 Hz-2 kHz (optional) | <1 ns | – | – | TEM00 | – | – | – | 15-30 | – | – | – | – | – | – | – | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | ~3 | – | diode / pumped / all / solid | PSU-EO-P-Subnano | – | – | M2 / ≤1.5 | Warm-up time (minutes) / <15 | – | – | – | – | – | – | Datasheet |
| EO-266-Subnano -Hi | 266 nm | 1~2.5 W | 1~500 uJ | 100 Hz-10 kHz | < 1.5 ns @5 kHz ～2 ns @5 kHz | – | – | – | – | <15 | – | 15-30 | – | 24V/21A | >10000 | – | – | – | – | – | Air cooled or water cooled | – | – | – | – | – | – | ≤3mrad | – | – | – | – | – | – | ~1.5mm | – | – | – | Power stability (rms, 4 hours ±3℃) / <5% | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-266-Neoma | 266 nm | 100-300 mW | 1~3 mJ | 1-100 Hz ( Adjustable ) | <12 ns | – | – | – | – | <15 | – | 15-35 | – | 48V/7.3A | – | – | – | – | – | – | Air cooled | – | – | – | – | – | – | ≤7 | – | – | – | – | – | – | ~3.5×3.5 | – | diode / pumped / all / solid / state | – | – | – | – | – | <1ns (Int.) | 109 | – | – | – | – | Datasheet |
| DPS-266-Q | 266 nm | 200-500 mW | 2~5 mJ | 1-100 Hz ( Adjustable ) | <10 ns | – | – | – | – | <15 | – | 15-30 | – | – | – | – | – | – | – | – | Water cooled | – | – | – | – | – | – | <3 | – | – | – | – | – | – | ~2 / ~2.5 | – | – | PSU-DPS-Q | – | energy, / short / pulse | – | – | <1ns (Int.) | 109 | <5% | – | – | – | Datasheet |
| DPS-266-Pico | 266 nm | 100~500 mW | 10~100 nJ | 5 MHz | <50 ps, 50-900 | – | – | – | – | <15 | – | 15-30 | – | – | >10000 | <5%, <3% | – | – | – | – | Air cooled | – | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | diode / pumped / all / solid | PSU-DPS-Pico | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-D-266-Air | 266 nm | 1~100 mW | 1~12 uJ | 1 kHz-10 MHz | ~10 ps | – | – | – | – | ≥30 | – | – | – | 24V/20.9A | – | – | – | <1.2 | – | – | – | – | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <3%,<2%, <1% | TEM00 | Air cooled | Datasheet |
| PS-D-266 | 266 nm | 1~5 W | 0.1~4 uJ | 400 kHz-1 MHz | ~10 ps | – | – | TEM00 | – | ≥30 | – | 20-30 | – | 36V/40A | >10000 | – | – | <1.2 / <1.3 | – | – | – | – | – | – | – | >100:1 Horizontal (Vertical optional) | – | <2 | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | Datasheet |
320nm CW Pulse UV Laser
10 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing Stability Over Temperature(μrad/°C) | Operating voltage (VDC) | Cooled method (Water cooled) | Warm-up time (minutes) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Power stability (rms, 4 hours , ±3°C) | Beam diameter at the aperture 1/e2 (mm) | Power supply (12VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-320 | 320 nm | 1~30 mW | – | – | – | <1 MHz | <0.5% | <0.5% | – | TEM00 | Single | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-320-X | 320 nm | 1~50 mW | – | – | – | <1 MHz | <1% | <0.25% | – | TEM00 | – | <1.2 | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | 12V | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-320 | 320 nm | 50~300 mW | – | – | – | < 5 MHz | <1% | <0.5% | – | TEM00 | Single | <1.2 | <1.5 | – | >100:1 Vertical (Horizontal optional) | – | – | 20-30 | – | >10000 | <8 | – | WCH-580 | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-320-LN | 320 nm | 1~30 mW | – | – | – | < 0.003 nm | <1% | <1% | – | TEM00 | – | – | – | – | – | – | – | 10-35 | PSU-H-FDA | >10000 | <8 | – | – | <10 | Air Cooled/ Water Cooled | – | – | – | – | – | – | Datasheet |
| UV-DP-320-LN | 320 nm | 30~1500 mW | – | – | – | <0.003 nm | <0.5% | <1% | – | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | 12V/ 25A | – | <10 | – | WCH-580 | 10-35 | – | – | – | – | Datasheet |
| UV-FN-320 | 320 nm | 1~100 mW | – | – | – | < 0.2 nm | <1% | – | – | TEM00 | – | – | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | – | – | – | – | – | – | DC-1kHz; TTL and Analog optional | – | – | – | Datasheet |
| UV-DP-320-A | 320 nm | 100~500 mW | – | – | – | < 0.2 nm | <1% | – | – | Near TEM00 | – | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-DP-A | >10000 | – | – | – | <10 | Air Cooled | – | 10-35 | – | – | – | – | Datasheet |
| UV-DP-320-B | 320 nm | 500~4000 mW | – | – | – | < 0.2 nm | <0.5% | – | – | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | 12V/ 25A | – | <10 | – | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | – | Datasheet |
| AO-U-320-DP | 320 nm | 1~40 mW | 1~8 uJ | 1-30 kHz | ~13 ns @5 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | >10000 | – | – | – | <10 | Water cooled | – | 10-35 | – | <5%, <3% | <2.0 | 12V/25A | Datasheet |
| UV-FN-320-SLM | 320 nm | 50~100 mW | – | – | – | <1 MHz | <0.5% | <0.25% | <1.2 | TEM00 | – | – | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | 12V | – | – | – | – | – | – | – | – | – | Datasheet |
349nm CW Pulse UV Laser
14 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing Stability Over Temperature(μrad/°C) | Cooled method (Water cooled) | Warm-up time (minutes) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | Fiber connector | Fiber jacket | Fiber length | Power stability (rms, 4 hours , ±3°C) | Beam diameter at the aperture (mm) | Beam diameter at the aperture 1/e2 (mm) | Power supply (12VDC) | Ave power stability (rms, 4 hours±3℃) | Warm-up time(minutes) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-349 | 349 nm | 1~10 mW | – | – | – | <1 MHz | <1% | <1% | – | TEM00 | Single | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-349-X Ultra-compact | 349 nm | 1~50 mW | – | – | – | <1 MHz | <0.5% | <0.25% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-349 | 349 nm | 100~400 mW | – | – | – | < 5 MHz | <1% | <0.5% | – | TEM00 | Single | <1.2 | <1.5 | – | >100:1 Vertical (Horizontal optional) | – | – | 20-30 | – | >10000 | <8 | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-349-LN | 349 nm | 1~50 mW | – | – | – | < 0.003 MHz | <1% | <1% | – | TEM00 | – | – | – | – | – | – | – | 10-35 | PSU-H-FDA | >10000 | <8 | – | <10 | Air Cooled/ Water Cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-DP-349-LN | 349 nm | 50~2000 mW | – | – | – | < 0.003 MHz | <0.5% | <1% | – | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | – | <10 | – | WCH-580 | 10-35 | 12V/ 25A | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-349 | 349 nm | 1~150 mW | – | – | – | <0.2 nm | <1% | – | <1.5 | TEM00 | – | – | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | <8 | – | – | – | – | – | – | DC-1kHz; TTL and Analog optional | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-DP-349-A | 349 nm | 150~400 mW | – | – | – | <0.2 nm | <1% | – | – | Near TEM00 | – | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-DP-A | >10000 | – | – | <10 | Air Cooled | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-DP-349-B | 349 nm | 400~4000 mW | – | – | – | <0.2 nm | <0.5% | – | <1.2 | Near TEM00 | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | – | <10 | – | WCH-580 | 10-35 | 12V/ 25A | DC-1kHz; TTL and Analog optional | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN -349-SLM | 349 nm | 50~100 mW | – | – | – | <1 MHz | <0.5% | <0.25% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-349-SM | 349 nm | 1~50 mW | – | – | – | <0.2 nm | <1% | – | – | TEM00 | – | <1.2 | – | – | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | <10 | – | – | – | – | DC-1kHz; TTL and Analog optional | FC/APC | PVC | 1m | – | – | – | – | – | – | Datasheet |
| MPL-F-349 | 349 nm | 1~30 mW | 0.1~10 uJ | 1-3 kHz | 0.1-2.5 ns | – | – | – | – | TEM00 | – | <2 | – | <1.5 | – | – | – | – | PSU-H-FDA/PSU-H-LED | >10000 | – | – | <5 | – | – | 10-35 | – | – | – | – | – | <5%, <3%, <2% | ~1.2 | – | – | – | – | Datasheet |
| AO-S-349 | 349 nm | 1~15 mW | 1~8 uJ | 1 Hz-1 kHz | 6-10 ns @<10 kHz | – | – | – | – | TEM00 | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | – | PSU-AOM-DL | >10000 | – | – | – | – | – | 10-35 | – | – | – | – | – | <5%, <3% | – | ~1.0 | – | – | – | Datasheet |
| AO-S-349-FL | 349 nm | 1~100 mW | 1~60 uJ | 1 Hz-5 kHz | ~5 ns @<1 kHz | – | – | – | – | TEM00 | – | <1.2 | – | <2 | >100:1, Vertical (Horizontal optional) | – | – | – | – | >10000 | – | – | <10 | – | – | 10-35 | – | – | – | – | – | <3%, <2%, <1% | – | – | 12V/21A | – | – | Datasheet |
| AO-V-349 | 349 nm | 1~800 mW | 1~267 uJ | 3-10 kHz | ~10 ns @3 kHz | – | – | – | – | – | – | – | – | <2 | – | – | – | – | PSU-AOM (3U) | >10000 | – | – | – | Air cooled | – | 10-35 | – | – | – | – | – | – | – | – | – | <5%, <3% | <10 | Datasheet |
355nm CW Pulse UV Laser
52 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Warm-up time (minutes) | Pointing Stability Over Temperature(μrad/°C) | Cooled method | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | printing, | M2 | Polarization ratio | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | Operating voltage (VDC) | Beam diameter at the aperture (1/e2, mm) | Modulation option | Fiber connector | Fiber jacket | Fiber length | Beam diameter at the aperture (mm) | Operating temperature (℃) | Power stability (rms, 4 hours ± 3°C) | Power stability (rms, 4 hours , ±3℃) | Picosecond all fiber pulsed laser at 355nm | Polarization ratio (dB) | Delivery fiber length(cm) | Fundamental Frequency | Delivery fiber length (cm) | Power stability (rms, 4 hours , ±3°C) | (0.01-4kHz; Fan cooled) | Beam diameter at the aperture 1/e2 (mm) | LASER HEAD（Water Cooled） | Cooling method | Jitter (ns, sdev) | High average power diode pumped all solid | Pointing stability over temperature (urad/℃) | Polarization | Beam diameter (mm) | Relative humidity | Power supply (110/220VAC) | features of high single pulse energy, short | monitoring, | Ave power stability (over 4 hours) | Power supply (220/110VAC) | Warranty period | Jitter (ns, sdev) (optional) | energy | Power supply (24VDC) | Energy stability (std dev/mean) | of high single pulse energy ，short pulse | Power supply (VDC) | Expected lifetime (pulses) | High energy diode pumped all solid state | of short pulse duration, high repetition rate | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-3 55 | 355 nm | 1~10 mW | – | – | – | <1 MHz | <2% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-3 55 | 355 nm | 10~100 mW | – | – | – | <5 MHz | <1% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-355-LN | 355 nm | 1~10 mW | – | – | – | < 0.003 nm | <2% | <1% | – | TEM00 | <10 | <8 | Air Cooled/ Water Cooled | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-A-355 | 355 nm | 10~50 mW | – | – | – | <0.003 nm | <1% | <1% | – | TEM00 | <10 | – | – | 10-35 | PSU-W-FDA | >10000 | holography, / laser / display, / submarine / communication, | ~3.0 | >100:1 Horizontal (Vertical optional) | <0.05 | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-355 | 355 nm | 50~500 mW | – | – | – | <0.03 nm | <0.5% | <0.2% | – | TEM00 | <10 | – | Water Cooled | – | – | >10000 | – | <1. 1 | >50:1 (>100:1 optional), Horizontal (Vertical optional) | – | – | ~1.5 | <20 | 10-35 | 24V/31.3A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-355 | 355 nm | 1~50 mW | – | – | – | < 0.2 nm | <2% | – | – | TEM00 | – | <8 | – | 10-35 | – | >10000 | – | – | >100:1, Vertical (Horizontal optional) | – | – | <1.2 | – | – | – | <1.0 | DC-1kHz; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-A-355 | 355 nm | 50~450 mW | – | – | – | <0.2 nm | <1% | – | – | TEM00 | <10 | <8 | – | 10-35 | PSU-W-FDA | >10000 | – | – | >100:1 Horizontal (Vertical optional) | – | WCH-580 | <3.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-B-355 | 355 nm | 100~1000 mW | – | – | – | <0.04 nm | <1% | – | – | TEM00 | <10 | – | Water cooled | 10-35 | – | >10000 | – | <1.1 / <1.2 | >100:1 Horizontal | – | – | <5 | – | – | 24V/13A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-C-355 | 355 nm | 1~2 W | – | – | – | <0.04 nm | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-D-355 | 355 nm | 2~5 W | – | – | – | <0.08 nm | <1% | – | – | – | <10 | – | Water cooled | 10-35 | – | >10000 | – | <1.5 | >100:1 Horizontal | – | – | <4.5 | – | – | DC 36V/ 19.6A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-355-SM | 355 nm | 1~20 mW | – | – | – | <0.2 nm | < 3 % | – | – | TEM00 | <10 | – | – | 10-35 | PSU-H-FDA | >10000 | – | <1.2 | – | – | – | – | – | – | – | – | DC-1kHz; TTL and Analog optional | FC/APC | PVC | 1m | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-355 (FC) | 355 nm | 1~1500 mW | – | – | – | – | <1% | – | – | TEM00 | <5 | – | – | – | PSU-SR | >10000 | – | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | ~1.5 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-355 | 355 nm | 1~1000 mW | 1~50 uJ | ~20 kHz | ~3 ns | – | – | – | – | TEM00 | <15 | – | – | – | – | >10000 | – | – | >100:1 Vertical | – | – | ~1.0 | – | – | PSU-FL-FDA (12V/25A) / PSU-FL-OEM (12V/25A) | – | – | – | – | – | – | 10-35 | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-FL-355 | 355 nm | 1~1000 mW | 1~50 uJ | ~20 kHz | ~5 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-355-PS | 355 nm | 1~50 mW | 0.05~2.5 nJ | 20-50 MHz | <10 ps | – | – | – | – | TEM00 | <15 | – | – | – | – | >10000 | – | – | >100:1 Vertical | – | – | ~1.0 | – | – | PSU-FL-FDA (12V/25A) / PSU-FL-OEM (12V/25A) | – | – | – | – | – | – | 10-35 | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-355-Pico | 355 nm | 1~50 mW | 10~500 nJ | 0.1-20 MHz | 100-900 ps | – | – | – | – | – | <15 | – | Air cooled | – | – | >10000 | – | <2 | – | – | – | – | – | – | 12V/11.5A | – | – | – | – | – | – | 15-35 | – | <5%, <3% | Pulse duration (ps)2 / 100-900 | >15 Horizontal (Vertical optional) | 60 | Third harmonic | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-355-Nano | 355 nm | 10~300 mW | 0.1~3 uJ | 0.1-1 MHz | 0.5-50 ns | – | – | – | – | – | <15 | – | Air cooled | – | – | >10000 | – | <2 | – | – | – | – | – | – | 12V/11.5A | – | – | – | – | – | – | 15-35 | – | <5%, <3% | – | >15 Horizontal (Vertical optional) | – | Third harmonic | 60 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-FN-355 | 355 nm | 1~30 mW | 1~15 uJ | 10 Hz-3 kHz | ~0.6 ns | – | – | – | – | TEM00 | <5 | – | – | – | PSU-SR | >10000 | – | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | ~1.5 | 10-35 | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-F-355 | 355 nm | 1~100 mW | 0.1~15 uJ | 1-7 kHz | ~5 ns | – | – | – | – | TEM00 | <5 | – | – | – | PSU-H-FDA/PSU-H-LED | >10000 | – | <2 | – | – | – | <1.5 | – | – | – | – | – | – | – | – | ~1.2 | 10-35 | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-Q-355 | 355 nm | 1~150 mW | 0.1~15 uJ | 3-12 kHz | ~1.3 ns | – | – | – | – | Near TEM00 | <5 | – | – | – | PSU-Q-FDA/PSU-Q-LED | >10000 | – | <2 | >50:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | ~1.0 | 10-35 | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-355-LP | 355 nm | 1~30 mW | 1~30 uJ | 1 Hz-1 kHz | ~0.4 ns | – | – | – | – | Near TEM00 | <5 | – | – | – | PSU-S-LP | >10000 | – | – | – | – | – | <2 | – | – | – | – | – | – | – | – | ~2.0 | 10-35 | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PA-355 | 355 nm | 1000 mW | 40 uJ | ~20 kHz | ~4 ns | – | – | – | – | TEM00 | <15 | – | – | – | PSU-12-P | >10000 | – | <1.2 | – | – | – | <3.5 | – | – | – | – | – | – | – | – | – | 10-35 | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-355-HP | 355 nm | 1~120 mW | 1~120 uJ | 1 Hz-100 kHz | ~0.4 ns | – | – | – | – | Near TEM00 | <5 | – | Fan cooled / Water Cooled | – | PSU-S-HP | >10000 | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | <5%, <3% | (0.01-4kHz; Water cooled) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-355 | 355 nm | 1~100 mW | 1~40 uJ | 1 Hz-20 kHz | 5-10 ns @<10 kHz | – | – | – | – | TEM00 | – | – | – | – | PSU-AOM-DL | >10000 | – | – | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | <5%, <3% | – | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-355 | 355 nm | 1~1000 mW | 1~150 uJ | 1 Hz-100 kHz | ~9 ns @1 Hz-1 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-V-355 | 355 nm | 1 W/ 3 W/ 5 W | 1 mJ | 1 Hz-200 kHz | ~12 ns @1 kHz | – | – | – | – | TEM00 | <10 | – | Air cooled or Water cooled | – | PSU-AOM | >10000 | – | <1.2 | >100:1 Horizontal | – | – | <3.5 | – | – | – | – | – | – | – | – | – | 10-35 | <2%，<1% | – | – | – | – | – | – | – | – | – | POWER SUPPLY / WATER CHILLER(WCH-580) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-355A | 355 nm | 1 W/ 3 W/ 5 W | 1 mJ | 1 Hz-200 kHz | ~12 ns @1 kHz | – | – | – | – | TEM00 | <10 | – | – | – | – | >10000 | – | <1.2 | >100:1 Horizontal | – | – | <3.5 | – | – | 12V/25A | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | – | – | – | – | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-355B | 355 nm | 1 W/ 3 W/ 5 W | 1 mJ | 1 Hz-200 kHz | ~12 ns @1 kHz | – | – | – | – | TEM00 | <10 | – | – | – | – | >10000 | – | <1.2 | >100:1 Horizontal | – | – | <3.5 | – | – | 12V/29A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-355W | 355 nm | 5 W | 1 mJ | 1 Hz-200 kHz | ~15 ns @5 kHz | – | – | – | – | TEM00 | <10 | – | Water cooled | – | – | >10000 | – | <1.2 | >100:1 Horizontal | – | – | <3.5 | – | – | 24V/20.9A (AO-355W-I) / 12V/25A (AO-355W-II) | – | – | – | – | – | – | 10-35 | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO- 532A & 355A | 355 nm | 1 W& 1 W | 500 uJ & 500 uJ | 1-10 kHz | ~13 ns @1 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | >100:1 Horizontal | – | – | ~2 | – | – | – | ~0.8 | – | – | – | – | – | – | <3%,<2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-355-L | 355 nm | 1~10 mW | 1~10 uJ | 10 Hz-1 kHz | ~5 ns | – | – | – | – | TEM00 | <10 | – | – | – | PSU-EOM-L | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | ~1.5 | – | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-355-PS | 355 nm | 1~6 W | 1~40 uJ | 1-1000 kHz | <15 ps | – | – | – | – | – | – | – | Water cooled | – | – | >10000 | – | ≤1.5 | – | – | – | ≤3 | – | – | – | – | – | – | – | – | – | 15-30 | – | <5% | – | – | – | – | – | – | – | – | – | – | – | Pulse duration (ps) / <15 | <50 | 100:1 | 1.5±0.5 | <60% | PSU-EO-PS | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-355-Subnano | 355 nm | 1~100 mW | 1~50 uJ | 1-5 kHz(adjustable) | <1.5 ns @1 kHz | – | – | – | – | – | <15 | – | Air cooled | – | – | – | – | – | – | – | – | <5mrad | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-Subnano | Rep. rate / 1-5kHz (adjustable) | scientific | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-XS-355 | 355 nm | 1~2 W | 1~50 uJ | 1-100 kHz | ~4 ns @40 kHz | – | – | – | – | – | <10 | – | Air cooled | – | – | 10000 | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 10~35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | PSU-AOM(3U) | 1 year | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-355-RS | 355 nm | 1~150 mW | 1~70 uJ | 10 Hz-20 kHz | ~1.3 ns | – | – | – | – | Near TEM00 | <10 | – | – | – | PSU-EOM-DL/PSU-EOM-L (optional)5 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | <5%, <3% | – | ~1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | Datasheet |
| EO-355-P- Subnano | 355 nm | 1~260 mW | 1~130 uJ | 500 Hz-2 kHz(optional) | <1 ns | – | – | – | – | TEM00 | – | – | Air cooled | – | – | – | – | ≤1.5 | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-P-Subnano | – | – | – | – | – | – | diode / pumped / all / solid | – | – | – | – | – | – | – | Datasheet |
| EO-355-G | 355 nm | 10~750 mW | 4~150 uJ | 1 Hz-25 kHz | <6 ns @1 kHz | – | – | – | – | – | <15 | – | Air cooled or water cooled | – | – | >10000 | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-30 | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | <20 | – | ~1 | – | – | – | – | – | – | – | – | – | PSU-EO-G (24V/13A) | – | – | – | – | – | – | Datasheet |
| EO-355-N | 355 nm | 10~750 mW | 4~200 uJ | 1 Hz-25 kHz | <6 ns @1 kHz | – | – | – | – | – | <15 | – | Air cooled or water cooled | – | – | >10000 | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-30 | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | <20 | – | ~1 | – | – | – | – | – | – | – | – | – | PSU-EO-N (24V/13A) | – | – | – | – | – | – | Datasheet |
| EO-355-Subnano -Hi | 355 nm | 1~3 W | 1~600 uJ | 100 Hz-10 kHz | <1.5 ns @5 kHz | – | – | – | – | – | <15 | – | Air cooled or water cooled | – | – | >10000 | – | – | – | – | – | ≤3mrad | – | – | 24V/21A | – | – | – | – | – | – | 15-30 | – | <5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~1.5mm | – | – | – | – | – | – | – | – | diode / pumped / all / solid | – | – | – | – | – | – | – | Datasheet |
| DPS-355-E | 355 nm | 50-100 mW | 1~2 mJ | 1-50 Hz (optional) | <4 ns | – | – | – | – | – | <15 | – | Conduction (DPS-355-E-I) / Air cooled (DPS-355-E-II) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | ~1 | – | – | – | – | – | – | – | – | – | – | <5% | Beam divergence, full angle (mrad) / <3 | PSU-DPS-E (24V/18.8 A) | 109 | – | – | Datasheet |
| DPS-355-Neoma | 355 nm | 100-400 mW | 1~4 mJ | 1-100 Hz (adjustable) | <12 ns | – | – | – | – | – | <15 | – | Air cooled | – | – | – | – | – | – | – | – | ≤7 | – | – | 48V/7.3A | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | ~3.5×3.5 | – | – | – | – | – | – | – | – | diode / pumped / all / solid / state | – | – | – | – | 109 | – | – | Datasheet |
| DPS-355-Q | 355 nm | 100-1000 mW | 1~10 mJ | 1-100 Hz (adjustable) | <10 ns | – | – | – | – | – | <15 | – | Water cooled | – | – | – | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | ~2 / ~2.5 / ~3 | – | PSU-DPS-Q | – | – | – | – | – | – | – | – | <5%, <3% | – | – | 109 | 1 | – | Datasheet |
| LPS-355-S | 355 nm | 200-800 mW | 20~80 mJ | 1-10 Hz (adjustable) | <10 ns | – | – | – | – | – | – | – | Water cooled | – | – | – | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | ~7 | – | PSU-LPS-S (3U) | – | – | – | – | – | – | – | – | <5%, <3% | – | – | 107-108 | – | – | Datasheet |
| LPS-355-L | 355 nm | 800-2000 mW | 80~200 mJ | 1-10 Hz (adjustable) | <10 ns | – | – | – | – | – | <15 | – | Water cooled | – | – | – | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | ~7 | – | PSU-LPS-L (3U) | – | – | – | – | – | – | – | – | <5%, <3% | – | – | 107-108 | – | – | Datasheet |
| LPS-355-Q | 355 nm | 800-2000 mW | 80~200 mJ | 1-10 Hz (adjustable) | <10 ns | – | – | – | – | – | <15 | – | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | ~9 | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | lamp / pumped / solid / state | – | – | Beam divergence, full angle (mrad) / <3 | – | 107-108 | – | – | Datasheet |
| DPS-355-Pico | 355 nm | 100~700 mW | 20-140 nJ | 5 MHz | <50 ps | – | – | – | – | – | <15 | – | Air cooled | – | – | >10000 | – | – | – | – | – | <3 | – | – | – | – | – | – | – | – | – | 15-30 | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-DPS-Pico | – | – | – | – | – | – | – | – | – | – | – | – | – | Beam diameter (mm) / ~2 | Datasheet |
| PS-D- 532 & 355 -Air | 355 nm | 1~500 mW | 1~500 nJ | 0.1-1 MHz | ~10 ps | – | – | – | – | – | – | – | – | – | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-D-355-Air | 355 nm | 1~1000 mW | 1~100 nJ | 1 kHz-10 MHz | ~10 ps | – | – | – | – | – | – | – | – | – | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-D-355-Water | 355 nm | 1~2000 mW | 1~2000 nJ | 0.4-2 MHz | ~10 ps | – | – | – | – | TEM00 | ≥30 | – | – | – | – | >10000 | – | <1.2 | >100:1 Horizontal (Vertical optional) | – | – | <2 | – | – | 36V/40A | – | – | – | – | – | – | 20-30 | <2%, <1% | – | – | – | – | – | – | – | – | – | – | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-D-355 | 355 nm | 1~30 W | 1~30 uJ | 0.4-1 MHz | ~10 ps | – | – | – | – | TEM00 | ≥30 | – | – | – | – | >10000 | – | <1.2 | >100:1 Horizontal (Vertical optional) | – | – | <2 | – | – | 36V/40A | – | – | – | – | – | – | 20-30 | <2%, <1% | – | – | – | – | – | – | – | – | – | – | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-355 | 355 nm | 1~1500 mW | – | – | – | – | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PS-D-532 | 355 nm | 1~500 mW | 1~500 nJ | 0.1-1 MHz | ~10 ps | – | <3%, <2%, <1% | – | <1.2 | – | – | – | – | – | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
360nm CW Pulse UV Laser
11 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Optical noise | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Longitudinal mode | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Power supply (100-240VAC) | Warm-up time (minutes) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Fiber connector | Fiber jacket | Fiber length | Ave power stability (rms, 4 hours±3℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-360-X | 360 nm | 1~50 mW | – | – | – | <1 MHz | <0.5% | <0.25% | TEM00 | <1.2 | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | 12V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-360 | 360 nm | 1~80 mW | – | – | – | <1 MHz | <1% | <0.5% | TEM00 | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | 10-35 | – | >10000 | Single | <8 | <±200 | PSU-H-FDA | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-3 60 | 360 nm | 80~300 mW | – | – | – | < 5 MHz | <1% | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-360-LN | 360 nm | 1~100 mW | – | – | – | < 0.003 nm | <0.5% | <1% | TEM00 | – | – | – | – | <8 | 10-35 | – | >10000 | – | – | – | PSU-H-FDA | <10 | Air Cooled/ Water Cooled | – | – | – | – | – | – | – | Datasheet |
| UV-DP-360-LN | 360 nm | 100~1500 mW | – | – | – | <0.003 nm | <0.5% | <1% | Near TEM00 | – | <3.0 | – | – | – | – | 12V/ 25A | >10000 | – | – | – | – | <10 | – | WCH-580 | 10-35 | – | – | – | – | – | Datasheet |
| UV-FN-3 60 | 360 nm | 1~150 mW | – | – | – | <0.2 nm | <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-DP-360-A | 360 nm | 150~400 mW | – | – | – | <0.2 nm | <1% | – | Near TEM00 | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | – | – | – | PSU-DP-A | <10 | Air Cooled | – | 10-35 | – | – | – | – | – | Datasheet |
| UV-DP-360-B | 360 nm | 400~4000 mW | – | – | – | <0.2 nm | <0.5% | – | Near TEM00 | – | <3.0 | – | – | – | – | 12V/ 25A | >10000 | – | – | – | – | <10 | – | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | – | – | – | – | Datasheet |
| UV-FN-360-SM | 360 nm | 1~50 mW | – | – | – | <0.2 nm | <1% | – | TEM00 | <1.2 | – | – | – | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | <10 | – | – | – | DC-1kHz; TTL and Analog optional | FC/APC | PVC | 1m | – | Datasheet |
| HPL-360-T | 360 nm | 500 mW | 50 uJ | 1-10 kHz | <25 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Ti-360 | 360 nm | 1~800 mW | 1~23 uJ | 30 kHz | ~25 ns | – | – | – | – | – | – | <2 | >100:1Vertical | – | – | – | >10000 | – | – | – | 12V/26A | <10 | Water Cooled | – | 15-35 | – | – | – | – | <3%, 2%, (<1% optional) | Datasheet |
473nm CW Pulse Blue Laser
22 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | Warm-up time (minutes) | Frequency shift over 8 hours (MHz) (optional) | Shock tolerance (6ms) | Expected lifetime (hours) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Pointing stability over temperature (urad /°C) | Beam divergence, full angle (mrad) | Modulation optional | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Pointing Stability Over Temperature (urad/°C) | Cooled method | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Fiber Jacket | Operating temperature (℃) | Power supply (VDC) | made features of ultra compact, long Polarization ratio | Modulation option | Warranty (years) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of PGL-VI-473 | Dimensions of PGL-VI-1-473 | Dimensions of external | Beam diameter at the aperture(1/e2) (mm) | Operating voltage(external PCB) | Power supply (5VDC) | Power stability (rms, 4 hours , ±3°C) | Beam diameter at the aperture (mm) | Power stability (rms, 4 hours ± 3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-S-473-D | 473 nm | 1~30 mW | – | – | – | <1 MHz | <1% | <0.2% | – | TEM00 | Single | <5 | <±200 | 7g laterally,15g vertically | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-U-473 | 473 nm | 1~100 mW | – | – | – | <1 MHz | <0.5% | <0.5% | – | TEM00 | Single | <5 | – | – | >10000 | <1.2 | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-473 | 473 nm | 100~300 mW | – | – | – | <1 MHz | <1% | <0.5% | – | TEM00 | Single | <5 | – | – | >10000 | <1.2 | <2.0 | – | >100:1, Vertical (Horizontal optional) | – | <±200 | 10-35 | PSU-H-FDA | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-473-AOM | 473 nm | 1~200 mW | – | – | – | <1 MHz | <1% | <0.5% | – | TEM00 | Single | <5 | – | – | >10000 | <1.2 | – | – | >100:1, Vertical (Horizontal optional) | <8 | – | 10-35 | PSU-H-FDA-AOM | – | – | <1.5 | DC-1MHz;TTL or Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-473 | 473 nm | 1~100 mW | – | – | – | < 0.003 nm | <1% | <1% | – | TEM00 | – | <5 | – | – | >10000 | – | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-473 | 473 nm | 100~400 mW | – | – | – | < 0.003 nm | <1% | <1% | – | TEM00 | – | <5 | – | – | >10000 | <1.2 | – | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-W-473 | 473 nm | 400~2000 mW | – | – | – | < 0.1 nm | <1% | <3% | – | TEM00 | – | – | – | – | >10000 | <1.3 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | 10-35 | PSU-W-LED | – | – | ~1.0 | – | – | – | <20 | Water Cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-473-SM | 473 nm | 1~50 mW | – | – | – | < 0.003 nm | <1% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | >10000 | <1.1 | – | – | – | – | – | 10-35 | PSU-H-FDA | – | – | – | – | – | PSU-SR-OEM (12V/25A) | – | – | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-W-473-SM | 473 nm | 50~1000 mW | – | – | – | < 0.1 nm | <2% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | ＞10000 | <1.1 | – | – | – | – | – | 10-30 | PSU-W-LED | – | – | – | – | – | – | – | Water cooled | – | – | FC/APC | – | 1m | >50:1 after PM fiber | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-S-473 | 473 nm | 1~50 mW | – | – | – | < 0.2 nm | <0.5% | – | <1.2 | TEM00 | – | <5 | – | 7g laterally, 15g vertically | >10000 | – | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-A-F/PSU-A-D | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | <8 | – | – | – | – | – | – | – | – | – | – | 10-35 | PSU-A-F-OEM (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-U-473 | 473 nm | 50~300 mW | – | – | – | < 0.2 nm | <0.5% | – | <1.2 | TEM00 | – | <5 | – | – | >10000 | – | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-LED/PSU-H-FDA/PSU-SR | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-FN-473 | 473 nm | 300~1000 mW | – | – | – | < 0.2 nm | <1% | – | – | TEM00 | – | <5 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | – | <8 | PSU-SR-OEM(12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-F-473 | 473 nm | 1~500 mW | – | – | – | < 0.2 nm | <0.5% | – | – | – | – | <5 | – | – | >10000 | <1.5 | – | – | – | – | – | 10-35 | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-W-473 | 473 nm | 500~2000 mW | – | – | – | < 0.1 nm | <1% | – | – | TEM00 | – | – | – | – | >10000 | <1.3 | ~2.0 | – | – | – | – | 10-35 | PSU-W-FDA/PSU-W-LED | – | – | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-III-473-AOM | 473 nm | 1~50 mW | – | – | – | < 0.2 nm | <1% | – | – | TEM00 | – | <10 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-III-FDA-AOM | – | – | – | DC-1MHz; TTL or Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-FN-473-AOM | 473 nm | 50~150 mW | – | – | – | < 0.2 nm | <1% | – | – | TEM00 | – | <5 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA-AOM | – | – | – | DC-1MHz; TTL or Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-473 | 473 nm | 1~20 mW | – | – | – | – | – | – | – | TEM00 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | 3VDC | Cable with flying leads | 10°C to 35°C | -20°C to 80°C | <90%, non-condensing | Φ20×100mm2 | Φ15×65mm2 | control 750hz frequency) | – | – | – | – | – | – | Datasheet |
| PGL-H1-473 | 473 nm | 1~50 mW | – | – | – | – | – | – | – | Near TEM00 | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | 3VDC | – | 10°C to 35°C | -20°C to 80°C | – | – | – | – | ~1.5 | 5VDC | – | – | – | – | Datasheet |
| MBL-S-473-SM | 473 nm | 1~50 mW | – | – | – | < 0.2 nm | <2% | – | – | TEM00 (single mode fiber output) | – | <10 | – | – | >10000 | <1.2 | – | – | – | – | – | 10-35 | PSU-III-FDA/PSU-III-LED | – | – | – | – | – | – | – | – | 0.10-0.12 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-A-F-OEM (5V/5A) | – | – | – | Datasheet |
| MBL-W-473-SM | 473 nm | 50~1000 mW | – | – | – | < 0.1 nm | <2% | – | – | TEM00 (single mode fiber output) | – | <10 | – | – | ＞10000 | <1.1 | – | – | – | – | – | 10-30 | PSU-W-LED | – | – | – | – | – | – | – | Air cooled / Water cooled | – | SM fiber (PM fiber optional) | FC/APC | – | 1m | >50:1 after PM fiber | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-473 | 473 nm | 1~10 mW | 1~10 uJ | 1 Hz-4 kHz | ~2.2 ns | – | – | – | – | TEM00 | – | <5 | – | – | >10000 | <1.5 | – | – | >100:1, Vertical (Horizontal optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | ~1.0 | – | Datasheet |
| AO-V-473 | 473 nm | 500 mW | 50 uJ | 1-10 kHz | ~80 ns @<1 kHz | – | – | – | – | – | – | – | – | – | >10000 | – | – | – | – | – | – | – | PSU-AOM | – | – | <2.5 | – | – | – | – | Air cooled | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%,<2% | Datasheet |
429 NM Blue Violet Laser, Diode Laser, Blue Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-U-430-SF | 429 nm | 1~150 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
440 NM Laser, Violet Blue Laser, DPSS Laser |
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Rep. rate | Ave power stability (rms, 4 hours±3℃) | Operating temperature (℃) | Power supply (220-240AC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-440 | 440 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-H-440 | 440 nm | 1~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-440 | 440 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | Datasheet |
| MDL-H-440 | 440 nm | 1~3 W | <2%, <1%, <0.5% | – | 1.4×0.2 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | – | – | – | – | Datasheet |
| HPL-440-Q | 440 nm | 1~3000 mW | – | – | <3.5 | <10 | Water Cooled | – | – | >10000 | – | 5kHz | <5%, <3% | 15-35 | PSU-HPL-Q & PSU-HPL-CW | Datasheet |
| HPL-440-QM | 440 nm | 3~6 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
496 NM Blue Solid State Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| U-496-SF | 496 nm | 1~100 mW | |
| MBL-U-496-SF | 496 nm | 1~100 mW |
530nm Green Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-S-530-D | 530 nm | 1~50 mW |
550 NM Green Laser, Solid State Laser |
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms,20Hz-20MHz) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Free space output power (mW) | Fiber coupled output power (mW) | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | Power stability (rms, 4 hours±3℃) | Polarization Ratio | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-550 | 550 nm | 1~200 mW | <3%, <2%, <1% | TEM00 | Single | <1MHz | <1%, <0.5% | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-550-SLM | 550 nm | 1~500 mW | – | TEM00 | SLM | – | – | – | – | – | – | – | – | >10000 | 1-500 | 1-250 | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-550 | 550 nm | 1~100 mW | – | TEM00 | – | <0.1, <0.003 | – | – | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | <5 | – | – | – | <1.0 | <1.5 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-550 | 550 nm | 100~500 mW | – | TEM00 | – | – | – | <1.5 | – | – | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | <5 | – | – | – | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| FL-550-LN-L | 550 nm | 1~500 mW | – | TEM00 | SLM | – | – | – | – | – | – | – | – | >10000 | 1-500 | 1-250 | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | – | – | – | – | – | – | <2%, <1% | <0.002 | – | – | – | – | Datasheet |
| MGL-FN-550 | 550 nm | 1~500 mW | – | TEM00 | – | – | – | <1.5 | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | <5 | – | – | – | – | – | – | – | – | – | – | – | <3%, <2%, <1% | >100:1, Vertical (Horizontal Optional) | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
552 NM Green Laser, Solid State Laser |
3 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | Pointing stability over temperature (μrad/°C) | Modulation optional | Power stability (rms, 4 hours±3℃) | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Operating Temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-552 | 552 nm | 1~100 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-552 | 552 nm | 1~300 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <1.5 | >100:1, Vertical (Horizontal optional) | <8 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MGL-A-552 | 552 nm | 300~2000 mW | TEM00 | – | – | – | <10 | – | – | – | PSU-W-FDA | >10000 | – | >100:1 Horizontal (Vertical optional) | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | <3%, <2% (<1% optional) | <2.0 | <1.5 | <0.05 | WCH-580 | 10-35 | Datasheet |
555nm Yellow Green Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-555 | 555 nm | 1~100 mW | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser AT 2130 NM
1 model| Model | Wavelength | Output / average power | Beam divergence, full angle (mrad) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | during operations, etc. | Operating temperature (℃) | Power supply | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| OEM-IR-2130 | 2130 nm | 1~6 W | <3 | <5%, <3% | <10 | Cooled method / Water cooled | 10-30 | PSU-MIR (3U) | >10000 | Datasheet |
10.5 ΜM Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-10500-DFB | 10500 nm | 1~5 mW | |
| MDL-XN-10500 | 10500 nm | 1~200 mW |
Infrared Laser, 1035 NM Infrared Laser Module, Infrared DPSS Lasers.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1035 | 1035 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-1035 | 1035 nm | 1~2 W | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1035 | 1035 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-1035 | 1035 nm | 1~2 W | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1035 | 1035 nm | 2~3 W | – | – | – | – | – | – | – | – | Datasheet |
| FC-1035 | 1035 nm | 1~8 W | – | – | – | – | – | – | – | – | |
| MIL-1035(FC) | 1035 nm | 1~4500 mW | – | – | – | – | – | – | – | – |
1105 NM Infrared Laser, Solid State Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-F-1105 | 1105 nm | 1~500 mW | TEM00 | ~1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
| MIL-W-1105 | 1105 nm | 500~4000 mW | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser, 1140 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1140 | 1140 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-H-1140 | 1140 nm | 1~2000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-XF-1140 | 1140 nm | 2~5 W | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser, 1150 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1150 | 1150 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1150 | 1150 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-1150(FC) | 1150 nm | 1~800 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1160 NM Infrared Lasers, High Power Diode Laser System
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XF-1160 | 1160 nm | 1~5000 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser, 1190 NM Infrared Laser Module, Infrared DPSS Lasers.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-1190 | 1190 nm | 1~3000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-F-1190 | 1190 nm | 1~3000 mW | – | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| FC-1190 | 1190 nm | 1~8 W | – | – | – | – | – | – | – | – | – | |
| MIL-1190(FC) | 1190 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – |
Infrared Diode Laser, 1208 NM Infrared Diode Lasers, High Power Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization direction | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1208 | 1208 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-H-1208 | 1208 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MDL-HD-1208 | 1208 nm | 1~3500 mW | <2%, <1%, <0.5% | Multimode | – | <5 | – | – | – | PSU-N-FDA/PSU-N-LED | >10000 | Horizontal+ Vertical | 25±3 | Datasheet |
1250nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1250 | 1250 nm | 1~40 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Datasheet |
| MLL-III-1250-SM | 1250 nm | 1~40 mW | – | – | – | – | – | – | – | – | – | |
| TEM-F-1250 | 1250 nm | 1~40 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Datasheet |
| MDL-III-1250-SM | 1250 nm | 1~40 mW | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1250 | 1250 nm | 1~40 mW | – | – | – | – | – | – | – | – | – |
1268nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1268-SM | 1268 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-F-1268DFB | 1268 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1268-SM | 1268 nm | 1~10 mW | <2%, <1%, <0.5% | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1268DFB-SM | 1268 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1268 | 1268 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1273nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1273-SM | 1273 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-F-1273DFB | 1273 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1273DFB-SM | 1273 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1273-SM | 1273 nm | 1~10 mW | <2%, <1%, <0.5% | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| FC-OEM-1273 | 1273 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1290nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1290-SM | 1290 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1290DFB-SM | 1290 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1290-SM | 1290 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1290 | 1290 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1309nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1309-SM | 1309 nm | 1~15 mW | |
| TEM-F-1309DFB | 1309 nm | 1~15 mW | |
| MDL-III-1309DFB-SM | 1309 nm | 1~15 mW | |
| MDL-III-1309-SM | 1309 nm | 1~15 mW | |
| FC-OEM-1309 | 1309 nm | 1~15 mW |
1312nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1312-SM | 1312 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-F-1312DFB | 1312 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1312DFB-SM | 1312 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1312-SM | 1312 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1312 | 1312 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1320 NM Infrared Diode Lasers,infrared Diode Laser System.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1320 | 1320 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1320-SLD | 1320 nm | 1~34 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1320 | 1320 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1320 | 1320 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1320-SLD-SM | 1320 nm | 1~34 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-1320 | 1320 nm | 1~500 mW | – | Multimode | – | <10 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| PGL-V-H-1320 | 1320 nm | 1~1000 mW | – | Multimode | – | <10 | – | – | – | – | 10000 | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | 9 pin connector | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
| FC-1320 | 1320 nm | 1~10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-1320H | 1320 nm | 10~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-1320(FC) | 1320 nm | 1~2600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
1330nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1330-SM | 1330 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1330-SM | 1330 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1330DFB-SM | 1330 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1330 | 1330 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1335 NM Infrared Laser Module, Infrared DPSS Lasers
3 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1335 | 1335 nm | 1~500 mW | TEM00 | <1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
| FC-1335 | 1335 nm | 1~450 mW | – | – | – | – | – | – | – | – | – | |
| MIL-1335(FC) | 1335 nm | 1~450 mW | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1338 NM Infrared Laser Module, Infrared DPSS Lasers
3 models| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1338 | 1338 nm | 1~500 mW | TEM00 | <1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
| FC-1338 | 1338 nm | 1~450 mW | – | – | – | – | – | – | – | – | – | |
| MIL-1338(FC) | 1338 nm | 1~450 mW | – | – | – | – | – | – | – | – | – |
1350nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1350-SM | 1350 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1350-SM | 1350 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1350DFB-SM | 1350 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1350 | 1350 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1357 NM DPSS Infrared Laser, Infrared Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-FN-1357 | 1357 nm | 1~400 mW | <5%, <3%, <2% | TEM00 | <1.5 | <1.2 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
1368nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1368-SM | 1368 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1368-SM | 1368 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1368DFB-SM | 1368 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1368 | 1368 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1370 NM Infrared Diode Lasers,infrared Diode Laser System.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1370L | 1370 nm | 1~15 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-III-1370-SM | 1370 nm | 1~15 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | Datasheet |
| TEM-F-1370DFB | 1370 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1370L | 1370 nm | 1~15 mW | <2%, <1%, <0.5% | Near TEM00 | – | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MDL-III-1370-SM | 1370 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1370DFB-SM | 1370 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1380 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1380 | 1380 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1380 | 1380 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
1390nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1390-SM | 1390 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1390-SM | 1390 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1390DFB-SM | 1390 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1390 | 1390 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1392nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1392-SM | 1392 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| TEM-F-1392DFB | 1392 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1392-SM | 1392 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1392DFB-SM | 1392 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1392 | 1392 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1410nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1410-SM | 1410 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1410-SM | 1410 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1410DFB-SM | 1410 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1410 | 1410 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1420 NM Infrared Diode Lasers,infrared Diode Laser System.
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1420 | 1420 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MLL-H-1420 | 1420 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
| MDL-III-1420 | 1420 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-H-1420 | 1420 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | – | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser,1430 NM Infrared Diode Lasers,infrared Diode Laser System.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1430 | 1430 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-H-1430 | 1430 nm | 500~1500 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | Datasheet |
| MLL-III-1430-SM | 1430 nm | 1~15 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | Datasheet |
1480nm TEM00 Mode Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Power stability(rms, over 4 hours) | Warm-up time | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Operating temperature | Storage temperature | Humidity | Dimensions of laser head | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1480 | 1480 nm | 1~350 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1480 | 1480 nm | 1~350 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-LF-1480 | 1480 nm | 1~10 mW | – | – | – | – | – | – | -10°C to +45°C | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-1480 | 1480 nm | 1~1000 mW | – | Multimode | – | – | <10 | – | – | – | 10000 | – | – | – | 9 pin connector | – | – | – | <5%, <3%, <1% | minutes / <10 | 1 | 100-240VAC | 12VDC | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | 92(L)×40(W)×40(H)mm3 | Datasheet |
1490nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1490-SM | 1490 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| FC-OEM-1490 | 1490 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-1490DFB | 1490 nm | 1~20 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1490-SM | 1490 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1490DFB-SM | 1490 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1510nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1510-SM | 1510 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1510-SM | 1510 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1510DFB-SM | 1510 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1510 | 1510 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
1512nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1512-SM | 1512 nm | 1~10 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1512-SM | 1512 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1512DFB-SM | 1512 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1512 | 1512 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – |
1530nm DFB Laser, Infrared Laser, DPSS Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1530-SM | 1530 nm | 1~15 mW | <2%, <1%, <0.5% | <1%, <0.5% | 1m | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Datasheet |
| MDL-III-1530-SM | 1530 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1530DFB-SM | 1530 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-1530 | 1530 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – |
1540nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-OEM-1540 | 1540 nm | 1~15 mW | |
| MLL-III-1540-SM | 1540 nm | 1~15 mW | |
| TEM-F-1540DFB | 1540 nm | 1~20 mW | |
| MDL-III-1540-SM | 1540 nm | 1~15 mW | |
| MDL-III-1540DFB-SM | 1540 nm | 1~15 mW |
Infrared Laser, 1568 NM Infrared Laser Module, Infrared DPSS Lasers.
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1568-SM | 1568 nm | 1~15 mW | |
| TEM-F-1568DFB | 1568 nm | 1~20 mW | |
| MDL-III-1568-SM | 1568 nm | 1~15 mW | |
| MDL-III-1568DFB-SM | 1568 nm | 1~15 mW | |
| FC-OEM-1568 | 1568 nm | 1~15 mW |
Infrared Laser, 1570 NM Infrared Laser Module, Infrared DPSS Lasers.
4 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1570-SM | 1570 nm | 1~15 mW | |
| MDL-III-1570-SM | 1570 nm | 1~15 mW | |
| MDL-III-1570DFB-SM | 1570 nm | 1~15 mW | |
| FC-OEM-1570 | 1570 nm | 1~15 mW |
Infrared Laser, 1580 NM Infrared Laser Module, Infrared DPSS Lasers.
8 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MLL-III-1580-SM | 1580 nm | 1~15 mW | |
| TEM-F-1580DFB | 1580 nm | 1~20 mW | |
| MDL-III-1580DFB-SM | 1580 nm | 1~15 mW | |
| MDL-III-1580-SLD | 1580 nm | 1~17 mW | |
| MDL-III-1580-SM | 1580 nm | 1~15 mW | |
| MDL-III-1580-SLD-SM | 1580 nm | 1~17 mW | |
| FC-OEM-1580 | 1580 nm | 1~15 mW | |
| MIL-1580(FC) | 1580 nm | 1~20 mW |
1590nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1590DFB | 1590 nm | 1~20 mW | |
| MDL-III-1590DFB-SM | 1590 nm | 1~15 mW |
1610nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1610DFB | 1610 nm | 1~20 mW | |
| MDL-III-1610DFB-SM | 1610 nm | 1~15 mW |
1620nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1620DFB | 1620 nm | 1~5 mW | |
| MDL-III-1620DFB-SM | 1620 nm | 1~5 mW |
1625nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1625DFB | 1625 nm | 1~5 mW | |
| MDL-III-1625DFB-SM | 1625 nm | 1~5 mW |
1627nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1627DFB | 1627 nm | 1~5 mW | |
| MDL-III-1627DFB-SM | 1627 nm | 1~5 mW |
1647nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1647DFB | 1647 nm | 1~5 mW | |
| MDL-III-1647DFB-SM | 1647 nm | 1~5 mW |
1649nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1649DFB | 1649 nm | 1~5 mW | |
| MDL-III-1649DFB-SM | 1649 nm | 1~5 mW |
1650nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1650DFB | 1650 nm | 1~5 mW | |
| MDL-III-1650DFB-SM | 1650 nm | 1~5 mW |
1651nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1651DFB | 1651 nm | 1~10 mW | |
| MDL-III-1651DFB-SM | 1651 nm | 1~5 mW |
1653nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1653DFB | 1653 nm | 1~10 mW | |
| MDL-III-1653DFB-SM | 1653 nm | 1~5 mW |
1654nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1654DFB | 1654 nm | 1~5 mW | |
| MDL-III-1654DFB-SM | 1654 nm | 1~5 mW |
1680nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1680DFB | 1680 nm | 1~5 mW | |
| MDL-III-1680DFB-SM | 1680 nm | 1~5 mW |
1683nm DFB Laser, Infrared Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| TEM-F-1683DFB | 1683 nm | 1~5 mW | |
| MDL-III-1683DFB-SM | 1683 nm | 1~5 mW |
1710 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1710 | 1710 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | 10000 | 1 year | Datasheet |
Infrared Laser, 1720 NM Infrared Laser Module, Infrared DPSS Lasers.
4 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1720 | 1720 nm | 1~1000 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | 10000 | 1 year | Datasheet |
| FC-1720 | 1720 nm | 1~2.5 W | – | – | – | – | – | – | – | – | |
| FC-W-1720B | 1720 nm | 20~80 W | – | – | – | – | – | – | – | – | |
| MIL-1720(FC) | 1720 nm | 1~850 mW | – | – | – | – | – | – | – | – |
1834 NM IR Laser, Infrared Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M 2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | TTL/Analog modulation | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-1834 | 1834 nm | 1~1300 mW | <5%, <3% | Near TEM00 | <3.0 | <2.0 | <10 | Air Cooled | 10-35 | PSU-W-LED or PUS-W-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | >10000 | Datasheet |
Infrared Diode Laser AT 1920 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1920 | 1920 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Laser AT 2117 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2117 | 2117 nm | 1~2200 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Laser AT 2128 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2128 | 2128 nm | 1~1500 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
Infrared Diode Laser AT 2160 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2160 | 2160 nm | 1~400 mW | <1%, <2%, <3% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 2180 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2180 | 2180 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 2230 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2230 | 2230 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 2260 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2260 | 2260 nm | 1~400 mW | <2%, <1%, <0.5% | Multimode | <5.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | Datasheet |
Infrared Laser, 2600 NM Infrared Laser Module, Infrared DPSS Lasers.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Rep. rate | Single pulse energy (µJ) | Warm-up time (minutes) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2700 | 2600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | – | – | – | Datasheet |
| TUN-W-2600~4410 | 2600 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | – | – | – | Datasheet |
| EO-XS-2600-4410 | 2600 nm | 1~1000 mW | <5%, <3% | <5 | Air cooled | 10-35 | PSU-AOM (3U) | >10000 | 30-50kHz | 1-33.3 / 1-26.7 / 1-13.3 / 1-6.7 | <10 | Datasheet |
2796 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2796 | 2796 nm | 10~300 mW | <5%, <3% | Near TEM00 | <8 | <10 | Air Cooled | 15-35 | PSU-H-LED | >10000 | Datasheet |
Infrared Laser, 2800 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2800 | 2800 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Laser, 2830 NM Infrared Laser Module, Infrared DPSS Lasers.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2830 | 2830 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2910 NM MID Infrared Laser, Solid State Laser, IR Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2910 | 2910 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-PS-2910 | 2910 nm | 1~2000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
2921 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2921 | 2921 nm | 10~900 mW | <2%, <1% | Near TEM00 | <4 | <10 | Air Cooled | 15-35 | PSU-H-LED | >10000 | Datasheet |
2940 NM Infrared Laser, Solid State Laser, IR Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2,mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2940 | 2940 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | – | Datasheet |
| TUN-V-2916~3918 | 2940 nm | 1~400 mW | <5%, <3% | <5 | Air Cooled | 15-35 | RAD1PS | >10000 | <6 | Datasheet |
3 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3000 | 3000 nm | 1~400 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3000 | 3000 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.1 ΜM Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3100 | 3100 nm | 1~300 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3100 | 3100 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.2 ΜM Infrared Laser, CW Laser, Solid State Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3200 | 3200 nm | 1~300 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3200 | 3200 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-PS-3205 | 3200 nm | 1~2000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.3 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3300 | 3300 nm | 1~400 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3349nm Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3349 | 3349 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3390nm Infrared Laser, CW Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3390 | 3390 nm | 1~250 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3390 | 3390 nm | 250~1000 mW | <5%, <3% | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.4 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-W-3400 | 3400 nm | 250~1000 mW | <5%, <3% | <11 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
3.6 ΜM Infrared Laser, CW Laser, Solid State Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-3600 | 3600 nm | 1~200 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | Datasheet |
| MIL-V-3600 | 3600 nm | 1~400 mW | – | – | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | <3%, <2% | Datasheet |
| MIL-W-3600 | 3600 nm | 250~1000 mW | – | – | <11 | – | Air Cooled | 15-35 | RAD1PS | >10000 | <5%, <3% | Datasheet |
3.7 ΜM Infrared Laser, CW Laser, Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3700 | 3700 nm | 1~250 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
4.33 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-4330-DFB | 4330 nm | 1~15 mW |
4.56 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-4560-DFB | 4560 nm | 1~15 mW |
4.58 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-4580-DFB | 4580 nm | 1~15 mW |
4.1 ΜM Infrared Laser, CW Laser, Solid State Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-4100 | 4100 nm | 1~80 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-4100 | 4100 nm | 50~400 mW | – | – | – | – | – | – | – | Datasheet |
| HPL-MIR-4100 | 4100 nm | 1~2 W | – | – | – | – | – | – | – |
5.24 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-5240-DFB | 5240 nm | 1~15 mW |
5.81 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-5810-DFB | 5810 nm | 1~15 mW |
6.64 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-6640-DFB | 6640 nm | 1~15 mW |
6.79 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-6790-DFB | 6790 nm | 1~15 mW |
7.26 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7260-DFB | 7260 nm | 1~15 mW |
7.32 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7320-DFB | 7320 nm | 1~15 mW |
7.4 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7400-DFB | 7400 nm | 1~15 mW |
7.5 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7500-DFB | 7500 nm | 1~15 mW |
7.67 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-7670-DFB | 7670 nm | 1~15 mW |
8.2 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-8200 | 8200 nm | 1~1300 mW |
8.6 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-8600 | 8600 nm | 1~1000 mW |
9.26 ΜM Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-9260-DFB | 9260 nm | 1~15 mW |
9.4μm Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MDL-XN-9400 | 9400 nm | 1~400 mW |
Infrared Laser AT 2124 NM
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2124 | 2124 nm | 1~2500 mW | <5%, <3% | <4 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | Datasheet |
3.9 ΜM MID Infrared Laser， Solid State Laser |
4 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Power stability (rms, over 4 hours) | Rep.rate (kHz) | Pulse duration (ns) | Beam diameter at the aperture (1/e2,mm) | Power supply (90-264VAC) | Warranty period | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3900 | 3900 nm | 1~200 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XN-3900 | 3900 nm | 1~300 mW | – | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | <3%, <2%, <1% | Near TEM00 | – | – | – | – | – | – | Datasheet |
| MIL-W-3900 | 3900 nm | 50~800 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-MIR-3900 | 3900 nm | 1~1000 mW | – | <5 | – | – | 15~35 | – | 10000 | – | – | <3%, <5% | 10 | <50 | <6 | PSU-MIR (3U) | 1 year | Datasheet |
4 ΜM MID Infrared Laser， Solid State Laser |
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Rep. rate | Single pulse energy (µJ) | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-4000 | 4000 nm | 50~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XN-4000 | 4000 nm | 1~600 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | – | – | – | – | Datasheet |
| EO-XS-4000 | 4000 nm | 1~400 mW | – | – | <5 | <10 | Air cooled | 10-35 | PSU-AOM (3U) | >10000 | <5%, <3% | 30-50kHz | 1-33.3 / 1-26.7 / 1-13.3 / 1-6.7 | – | – | Datasheet |
| HPL-MIR-4000 | 4000 nm | 1~2 W | – | – | – | – | – | – | – | – | – | – | – | <3%, <5% | PSU-MIR (3U) | Datasheet |
| MIL-PS-4000 | 4000 nm | 1~600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
4.2 ΜM MID Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|
| MIL-W-4200 | 4200 nm | 50~200 mW | – | – | Datasheet |
| HPL-MIR-4200 | 4200 nm | 1~2 W | <3%, <5% | PSU-MIR (3U) | Datasheet |
4.4 ΜM MID Infrared Laser， Solid State Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-4400 | 4400 nm | 1~1000 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | – | Datasheet |
| MIL-W-4400 | 4400 nm | 20~100 mW | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-MIR-4400 | 4400 nm | 1~2 W | – | – | – | – | – | – | – | – | <3%, <5% | PSU-MIR (3U) | Datasheet |
4.6 ΜM MID Infrared Laser， Solid State Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XN-4600 | 4600 nm | 1~1500 mW | <3%, <2%, <1% | Near TEM00 | <5.0 | <10 | Air cooled | 10-35 | PSU-H-LED | >10000 | – | – | Datasheet |
| HPL-MIR-4600 | 4600 nm | 1~2000 mW | – | – | – | – | – | – | – | – | <3%, <5% | PSU-MIR (3U) | Datasheet |
612 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-612-SF | 612 nm | 1~100 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
613 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-613-SF | 613 nm | 1~100 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
666nm RED Laser, Solid State Laser, DPSS RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Polarization Ratio | Warm-up time (minutes) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-666 | 666 nm | 1~200 mW | TEM00 | >100:1, Vertical (Horizontal Optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | Datasheet |
669nm RED Laser, Solid State Laser, DPSS RED Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization Ratio | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-669 | 669 nm | 1~150 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MDL-III-669 | 669 nm | 1~150 mW | <2%, <1%, <0.5% | – | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MRL-FN-669 | 669 nm | 1~200 mW | – | TEM00 | – | – | – | <5 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | >100:1, Vertical (Horizontal Optional) | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
670 NM RED Laser.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PGL-FP-670 | 670 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-670L | 670 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-670-SM | 670 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, SMA905 optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MLL-FN-670 | 670 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-670L | 670 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-670-SM | 670 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Datasheet |
| MRL-DP-670-A | 670 nm | 500~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-670-B | 670 nm | 2~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-670-C | 670 nm | 4~6.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-FN-670 | 670 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
678 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-678 | 678 nm | 1~100 mW | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | Datasheet |
679 NM RED Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-FN-679 | 679 nm | 1~500 mW | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | Datasheet |
689 NM Laser, DPSS Laser, RED Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-U-689-SF | 689 nm | 1~200 mW |
698nm Laser, RED Laser, Solid State Laser |
8 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Polarization ratio | Operating voltage (VDC) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | Power stability (rms, 4 hours±3℃) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Beam divergence, full angle (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-698 | 698 nm | 1~300 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <10 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-698 | 698 nm | 300~1000 mW | TEM00 | Single | <5MHz | – | <15 | – | – | 20-30 | PSU-W-FDA | >10000 | <8 | WCH-580 | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-698 | 698 nm | 1~1000 mW | TEM00 | – | – | – | <5 | <8 | – | 10-35 | PSU-H-FDA | >10000 | – | – | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-698 | 698 nm | 1~1200 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/ PSU-H-LED/PSU-SR | >10000 | <8 | – | >100:1, Vertical (Horizontal optional) | – | <1.5 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MRL-FN-698-H | 698 nm | 1~1.8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-698-A | 698 nm | 1.8~3 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | 10-35 | PSU-DP-A | >10000 | – | – | – | – | <3.0 | – | <3%, <2%, <1% | Air Cooled | – | – | – | Datasheet |
| MRL-DP-698-B | 698 nm | 3~7 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | – | ~3.0 | – | <3%, <2%, <1% | – | WCH-580 | 10-35 | – | Datasheet |
| MRL-DP-698-C | 698 nm | 7~10 W | Multi mode | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | 12V/ 25A | ~3.0 | – | <3%, <2%, <1% | – | WCH-580 | 10-35 | <5.0 | Datasheet |
244nm Q Switched UV Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| UV-DP-244-B | 244 nm | 1~30 mW |
245nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| UV-DP-245-B | 245 nm | 1~30 mW |
248nm Q Switched UV Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-248-B | 248 nm | 1~50 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
250nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-250-B | 250 nm | 1~50 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
257nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-257-B | 257 nm | 1~150 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
259nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-259-B | 259 nm | 1~150 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
269nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-269-B | 269 nm | 1~300 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
273nm UV CW Ultraviolet Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Cooled method (Water Cooled) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-273 | 273 nm | 1~5 mW | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | >10000 | – | – | – | – | – | – | – | Datasheet |
| UV-DP-273-A | 273 nm | 5~100 mW | Near TEM00 | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | <3%, <2%, <1% | <10 | Air Cooled | 10-35 | PSU-DP-A | – | – | Datasheet |
| UV-DP-273-B | 273 nm | 100~400 mW | Near TEM00 | <3.0 | – | – | – | – | DC-1kHz; TTL and Analog optional | >10000 | – | <10 | – | 10-35 | – | WCH-580 | 12V/ 25A | Datasheet |
275nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method (Water Cooled) | Modulation option | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-275-A | 275 nm | 1~50 mW | <3%, <2%, <1% | Near TEM00 | <3.0 | <10 | >100:1, Vertical (Horizontal optional) | Air Cooled | 10-35 | PSU-DP-A | >10000 | – | – | – | Datasheet |
| UV-DP-275-B | 275 nm | 50~200 mW | – | Near TEM00 | <3.0 | <10 | – | – | 10-35 | – | >10000 | WCH-580 | DC-1kHz; TTL and Analog optional | 12V/ 25A | Datasheet |
280nm Q Switched UV Laser.
4 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Operating temperature (°C) | Rep. rate (kHz) | Power stability (rms, over 4 hours) | Beam diameter at the aperture (1/e2,mm) | Cooled method | Power supply (220/110VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-280-B | 280 nm | 1~20 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-L-280 | 280 nm | 1~10 mW | – | – | <10 | – | – | – | – | – | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~10 | 3 | <5%, <3% | 20~30 | – | – | – | – | – | Datasheet |
| PS-M-280 | 280 nm | 1~40 mW | – | – | – | – | 15~35 | – | – | – | – | – | – | – | – | – | 500-1000 | <3%, (<2% optional) | ~3.0 | Water cooled | On request | Datasheet |
| AO-K-280/20uJ | 280 nm | 100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
287nm UV Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-287-B | 287 nm | 1~100 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
294nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| UV-DP-294-B | 294 nm | 1~15 mW |
298nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-298-B | 298 nm | 1~30 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
313nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-313-A | 313 nm | 1~500 mW | <3%, <2%, <1% / <2%, <1%, <0.5% | Near TEM00 | <3.0 | <10 | Air Cooled / WCH-580 (Water Cooled) | 10-35 | PSU-DP-A / / | / / 12V/ 25A | >10000 | Datasheet |
| UV-DP-313-B | 313 nm | 500~4000 mW | <3%, <2%, <1% / <2%, <1%, <0.5% | Near TEM00 | <3.0 | <10 | Air Cooled / WCH-580 (Water Cooled) | 10-35 | PSU-DP-A / / | / / 12V/ 25A | >10000 | Datasheet |
325nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-325-B | 325 nm | 1~1000 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
330nm UV Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Operating temperature (°C) | Rep. rate (kHz) | Power stability (rms, over 4 hours) | Beam diameter at the aperture (1/e2,mm) | Cooled method | Power supply (220/110VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-330-B | 330 nm | 1~50 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-L-330 | 330 nm | 1~10 mW | – | – | <10 | – | – | – | – | – | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~10 | 3 | <5%, <3% | 20~30 | – | – | – | – | – | Datasheet |
| PS-M-330 | 330 nm | 1~30 mW | – | – | – | – | 15~35 | – | – | – | – | – | – | – | – | – | 500-1000 | <3%, (<2% optional) | ~3.0 | Water cooled | On request | Datasheet |
335nm UV Laser, Actively Q Switched Ultraviolet Laser
6 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Pointing Stability Over Temperature(μrad/°C) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-335 | 335 nm | 1~10 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <1.5 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-335-LN | 335 nm | 1~10 mW | TEM00 | – | <0.1, <0.003 | <1% | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | 10-35 | PSU-H-FDA | >10000 | <2%, <1% | <10 | <8 | Air Cooled/ Water Cooled | – | – | – | – | Datasheet |
| UV-DP-335-LN | 335 nm | 10~500 mW | Near TEM00 | – | – | <1% | – | <3.0 | – | – | – | – | – | – | >10000 | <2%, <1%, <0.5% | <10 | – | – | WCH-580 | 10-35 | 12V/ 25A | – | Datasheet |
| UV-FN-335 | 335 nm | 1~60 mW | TEM00 | – | – | – | – | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | – | 10-35 | – | >10000 | – | – | <8 | – | – | – | – | DC-1kHz; TTL and Analog optional | Datasheet |
| UV-DP-335-A | 335 nm | 60~200 mW | Near TEM00 | – | – | – | – | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | PSU-DP-A | >10000 | <3%, <2%, <1% | <10 | – | Air Cooled | – | 10-35 | – | – | Datasheet |
| UV-DP-335-B | 335 nm | 200~1200 mW | Near TEM00 | – | – | – | – | <3.0 | – | – | – | – | – | – | >10000 | – | <10 | – | – | WCH-580 | 10-35 | 12V/ 25A | DC-1kHz; TTL and Analog optional | Datasheet |
340nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-340-LN | 340 nm | 1~500 mW | <2%, <1%, <0.5% | Near TEM00 | <3.0 | <1% | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | – | Datasheet |
| UV-DP-340-B | 340 nm | 1~1000 mW | – | Near TEM00 | <3.0 | – | <10 | WCH-580 | 10-35 | 12V/ 25A | >10000 | DC-1kHz; TTL and Analog optional | Datasheet |
364 NM UV Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing Stability Over Temperature(μrad/°C) | Cooled method | Operating Temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-364-LN | 364 nm | 1~90 mW | <1% | TEM00 | 0.75% | <1.2 | 0.5mrad | >100:1, Vertical (Horizontal optional) | <10 | <8 | Air Cooled/ Water Cooled | 10-35 | PSU-H-FDA | >10000 | Datasheet |
365 NM UV Diode Laser.
3 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Cooled method (Water Cooled) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-365 | 365 nm | 1~100 mW | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | >10000 | – | – | – | – | – | – | – | Datasheet |
| UV-DP-365-A | 365 nm | 100~150 mW | Near TEM00 | <3.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | <3%, <2%, <1% | <10 | Air Cooled | 10-35 | PSU-DP-A | – | – | Datasheet |
| UV-DP-365-B | 365 nm | 150~1200 mW | Near TEM00 | <3.0 | – | – | – | – | DC-1kHz; TTL and Analog optional | >10000 | – | <10 | – | 10-35 | – | WCH-580 | 12V/ 25A | Datasheet |
302nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Modulation option | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-DP-302-B | 302 nm | 1~500 mW | Near TEM00 | <3.0 | <10 | WCH-580 | 10-35 | DC-1kHz; TTL and Analog optional | 12V/ 25A | >10000 | Datasheet |
304nm UV CW Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Modulation option | Expected lifetime (hours) | Warm-up time (minutes) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UV-FN-304 | 304 nm | 1~30 mW | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | DC-1kHz; TTL and Analog optional | >10000 | – | – | – | – | Datasheet |
| UV-DP-304-B | 304 nm | 30~500 mW | Near TEM00 | <3.0 | – | – | – | – | DC-1kHz; TTL and Analog optional | >10000 | <10 | WCH-580 | 10-35 | 12V/ 25A | Datasheet |
571 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-571-SF | 571 nm | 1~200 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
577 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
11 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Operating voltage (VDC) | Shock tolerance (6ms) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Modulation option | Storage temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-577 | 577 nm | 1~300 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-577 | 577 nm | 1~200 mW | TEM00 | – | <0.1, <0.003 | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2%, <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| MLL-F-577 | 577 nm | 200~300 mW | – | – | <0.1 | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2% | – | ~2.0 | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MGL-S-577 | 577 nm | 1~30 mW | TEM00 | – | – | – | <5 | – | – | – | – | >10000 | – | – | <1.0 | <1.5 | – | – | – | – | 7g laterally, 15g vertically | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-U-577 | 577 nm | 1~500 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <3%, <2%, <1% | – | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <8 | PSU-SR-OEM(12V/25A) | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-F-577 | 577 nm | 500~600 mW | – | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-FN-577 | 577 nm | 600~1200 mW | – | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | <1.5 | >100:1, Horizontal (Vertical optional) | <8 | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-FN-577-A | 577 nm | 1.2~4 W | TEMn1 | – | – | – | – | – | – | 10-35 | – | >10000 | <5%, <3% | <1.5 | – | <10 | >100:1, Horizontal (Vertical optional) | – | – | 100-240V | – | – | – | – | – | – | Datasheet |
| MGL-W-577A | 577 nm | 1.2~5 W | Near TEM00 | – | – | – | <10 | – | – | 10-35 | PSU-W-LED | >10000 | – | – | ~5.0 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | <3%, <2%, (<1% optional) | <1.5 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | Datasheet |
| OEM-S-577-MD | 577 nm | 1~1000 mW | TEMn1 | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | 0-60 | Datasheet |
| MGL-N-577-AOM | 577 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
585 NM Yellow Laser, Solid State Laser, Yellow Laser Module |
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MGL-U-585-SF | 585 nm | 1~100 mW | TEM00 | ~3.0 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
588nm Yellow Laser, Yellow Orange Solid State Laser, DPSS Laser |
12 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method (Water cooled) | Power supply (90-264VAC) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Shock tolerance (6ms) | Operating temperature (℃) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Pointing Stability Over Temperature (urad/°C) | Beam divergence, full angle (mrad) | Modulation option | Power supply (5VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-588 | 588 nm | 1~200 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-W-588 | 588 nm | 200-500 mW | TEM00 | Single | <0.00001 | <1%, <0.5% | <20 | <8 | – | 20-30 | – | >10000 | <3%, <2% | <1.5 | <3.0 | >100:1, Horizontal (Vertical optional) | WCH-580 | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-588 | 588 nm | 1~200 mW | TEM00 | – | <0.1, <0.003 | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2%, <1% | <1.2 | <1.0 | >100:1, Horizontal (Vertical optional) | – | – | <1.5 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-588 | 588 nm | 200-300 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <3%, <2%, <1% | – | <1.5 | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-588-SM | 588 nm | 1~100 mW | TEM00 (single mode fiber output) | – | – | <1% | <10 | – | – | 10-35 | PSU-H-FDA | >10000 | – | <1.1 | – | – | – | – | – | – | PSU-SR-OEM (12V/25A) | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-588 | 588 nm | 1~50 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-A-D/PSU-A-F | >10000 | <3%, <2%, <1%, (<0.5% optional) | <1.2 | <1.0 | >100:1, Horizontal (Vertical optional) | – | – | <1.5 | <8 | – | – | – | – | – | – | – | 7g laterally, 15g vertically | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MGL-U-588 | 588 nm | 50~200 mW | TEM00 | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <3%, <2%, <1% | – | <1.0 | >100:1, Horizontal (Vertical optional) | – | – | <1.5 | <8 | PSU-SR-OEM(12V/25A) | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MGL-F-588 | 588 nm | 200~300 mW | – | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MGL-FN-588 | 588 nm | 300~800 mW | – | – | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | >100:1, Horizontal (Vertical optional) | – | – | <1.5 | <8 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MGL-N-588 | 588 nm | 300~500 mW | Near TEM00 | – | – | – | <10 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | <3.0 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <20 | – | – | – | Datasheet |
| MGL-W-588A | 588 nm | 500~7000 mW | Near TEM00 | – | – | – | – | – | – | – | PSU-W-LED | >10000 | – | – | ~4.0 | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | <3%, <2%, (<1% optional) | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | Datasheet |
| MGL-S-588-SM | 588 nm | 1~20 mW | TEM00 (single mode fiber output) | – | – | – | <10 | – | – | 10-35 | PSU-III-FDA/PSU-III-LED | >10000 | – | <1.1 | – | – | – | – | – | – | – | 0.10-0.12 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | PSU-A-F-OEM (5V/5A) | Datasheet |
457 NM Blue Laser.
18 models| Model | Wavelength | Output / average power | Power stability | Optical noise | M² | Output power (W) | Power Stability (rms, 4 hours ± 3°C) | Transverse mode | Spectral linewidth (nm) | Noise of amplitude(rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | Power supply (100-240VAC) | Expected lifetime (hours) | Output power (mW) | Power stability (rms, 4 hours , ±3°C) | Beam divergence (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power stability (rms, 4 hours ± 3°C) | Polarization (optional) | Fiber core diameter | Fiber connector | Fiber length | Fiber Jacket | Single pulse energy (µJ) | Rep. rate (kHz) | Pulse duration (ns) | Operating temperature (℃) | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Power supply (12VDC) | Spectral line width (nm) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-R-457 | 457 nm | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Low Noise | 457 nm | 350-1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-K-457 | 457 nm | – | – | – | – | 1-5 | <3%, <2%, (<1% optional) | TEM00 | <0. 1 | <1%,(<0. 5% optional) | <1. 1 | ~1.0 | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | Water cooled | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| High Stability | 457 nm | 1-500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MBL-F-457 | 457 nm | – | – | – | – | – | – | – | – | – | <2.0 | – | – | – | – | – | >10000 | 500-1000 | <5%, <3% | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-K-457 | 457 nm | – | – | – | – | 1 | <5%, <3%, (<2% optional) | TEM00 | <0. 1 | – | <1. 2 | ~1.0 | <20 | >50:1(>100:1 optional), Horizontal (Vertical optional) | Air cooled | PSU-W-LED | >10000 | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MBL-K-457-Water | 457 nm | Water cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Diode laser | 457 nm | 1-80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-457 | 457 nm | – | – | – | – | – | – | Multimode | – | – | – | <2.1×1.6 / <2.5×0.2 | – | – | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | <5 | 10-35 | – | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-457 | 457 nm | 1-1000 mW | – | <0.5% | – | – | – | – | – | – | – | <2.1×1.6 / <2.5×0.2 | – | – | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | <5 | 10-35 | – | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Single Longitudinal Mode Single Frequency | 457 nm | 1-350 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| Narrow Linewidth | 457 nm | 1-350 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-K-457-SM | 457 nm | SM Fiber output laser Water cooled | – | – | – | – | <3%, <2%, (<1% optional) | TEM00 (single mode fiber output) | – | – | <1.1 | – | – | – | Water cooled | PSU-W-LED | ＞10000 | – | – | – | <10 | 10-30 | – | – | >50:1 after PM fiber | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | – | Datasheet |
| Q-switched Laser | 457 nm | 1-15 uJ/ 1-150 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| EO-XS-457 | 457 nm | 1-15 uJ/ 1-150 mW | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | Water cooled | PSU-AOM (3U) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | 1-15 | 10 | ~3 | 10-35 | – | – | – | – | – | Datasheet |
| MBL-U-457 | 457 nm | 1-500 mW | <2%, <1%, <0.5%, <3% | – | <1.5 | – | – | TEM00 | – | – | – | – | – | >100:1, Vertical (Horizontal optional) | – | PSU-H-LED/PSU-H-FDA/PSU-SR | >10000 | – | – | – | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | <1.0 | <8 | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MBL-XS-457 | 457 nm | 1-80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-F-457 | 457 nm | 350-1000 mW | <3%, <2%, <1% | – | <2.0 | – | – | – | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | PSU-H-FDA | >10000 | – | – | – | <5 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <0.1 | PSU-SR-OEM (12V/25A) | Datasheet |
460nm Blue Laser
19 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Operating temperature (℃) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-460 | 460 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | Datasheet |
| MLL-III-460L | 460 nm | 1~80 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 | <1 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | Datasheet |
| MLL-III-460 | 460 nm | 1~800 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | Datasheet |
| MLL-F-460 | 460 nm | 800~15000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | – | ~2.5×0.5 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | 10-35 | – | – | – | – | Datasheet |
| MLL-III-460-SM | 460 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | Datasheet |
| TEM-F-460 | 460 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | Datasheet |
| MDL-III-460 | 460 nm | 1~800 mW | <2%, <1%, <0.5% | Multimode | – | – | <2.1×1.6 / <2.5×0.2 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | Datasheet |
| MDL-F-460 | 460 nm | 800~1500 mW | – | Multimode | – | – | ~2.5×0.5 | <5 | – | PSU-H-FDA/PSU-H-LED | >10000 | Air cooled | 10-35 | – | – | – | – | Datasheet |
| MDL-MD-460 | 460 nm | 1~6000 mW | <2%, <1%, <0.5% | Multimode | – | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | – | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-460 | 460 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-460 | 460 nm | 8~16 W | – | – | – | – | <2.4×2.0 | <5 | – | PSU-N-LED/ PSU-N-FDA | 10000 | – | 10-35 | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| MDL-III-460-SM | 460 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | – | – | <2.1×1.6 / <2.5×0.2 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Conduction | – | – | – | – | – | Datasheet |
| PGL-FP-460 | 460 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| YL-I-460 | 460 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-460 | 460 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-460C | 460 nm | 30~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-460H-II | 460 nm | 50~200 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-460(FC) | 460 nm | 1 mW~14 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-460L | 460 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
465 NM Blue Violet Diode Laser.
11 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Operating temperature (℃) | Polarization direction | Power stability (rms, over 4 hours) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-465 | 465 nm | 1~800 mW | <2%, <1%, <0.5% | <1%, <0.5% | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | Datasheet |
| MLL-F-465 | 465 nm | 800~1500 mW | <2%, <1%, <0.5% | <1%, <0.5% | ~2.5×0.5 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | Multimode | 10-35 | – | – | – | – | Datasheet |
| MDL-III-465 | 465 nm | 1~800 mW | <2%, <1%, <0.5% | – | <2.1×1.6 / <2.5×0.2 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | – | – | – | – | – | Datasheet |
| MDL-F-465 | 465 nm | 800~1500 mW | – | – | – | – | – | – | PSU-H-LED/ PSU-H-FDA | – | – | – | – | – | – | – | Datasheet |
| F-465-HS | 465 nm | 800~1500 mW | – | – | ~2.5×0.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | Multimode | – | – | – | – | – | Datasheet |
| MDL-MD-465 | 465 nm | 1~6000 mW | <2%, <1%, <0.5% | – | ~3.4×3.8 / ~3.3×3.8 | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-N-LED | >10000 | Multimode | 25±3 | Horizontal+ Vertical / Horizontal/ Vertical | – | – | – | Datasheet |
| MDL-HD-465 | 465 nm | 4~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-465 | 465 nm | 8~16 W | – | – | <2.4×2.0 | <5 | – | – | PSU-N-LED/ PSU-N-FDA | 10000 | – | 10-35 | Horizontal+Vertical | <1%, <2%, <3% | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| YL-I-465 | 465 nm | 1~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-465 | 465 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-465(FC) | 465 nm | 1~13500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
491 NM Blue Laser.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MBL-U-491-SF | 491 nm | 1~400 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | Datasheet |
Green Laser, 514.5 NM Laser, Argon Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MXL-515 | 514.5 nm | 1~500 mW |
522nm Green Laser
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms,20Hz-20MHz) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (μrad/°C) | Warm-up time (minutes) | Cooled method (water cooled) | Power stability (rms, 4 hours ± 3°C) | Operating temperature (℃) | Parameters of customed power supply | Modulation optional | Power stability (rms, 4 hours±3℃) | M2 | Fiber connector | Fiber jacket | Fiber length | Operating Temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-522 | 522 nm | 1~150 mW | <3%, <2%, <1% | TEM00 | Single | <1MHz | <1%, <0.5% | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-522 | 522 nm | 150~500 mW | – | TEM00 | Single | <5MHz | – | – | – | – | – | 20-30 | PSU-W-FDA | >10000 | <8 | <15 | WCH-580 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TUN-518-522 | 522 nm | 1~30 mW | – | – | – | <0.1 | – | <1.0 | – | – | – | – | PSU-TUN | >10000 | – | <5 | – | <3%, <2%, <1% | 20-30 | TEC: 7-12kΩ | – | – | – | – | – | – | – | Datasheet |
| FN-522 | 522 nm | 1~400 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-522 | 522 nm | 1~800 mW | – | TEM00 | – | – | – | <1.5 | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | <5 | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MGL-FN-522-SM | 522 nm | 1~300 mW | – | TEM00 | – | – | – | – | – | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <10 | – | – | – | – | – | <3%, <2%, <1% | <1.2 | FC/APC | PVC | 1m | 10-35 | Datasheet |
| MGL-DP-522-A | 522 nm | 800~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-DP-522-B | 522 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-DP-522-C | 522 nm | 3~7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-FN-522 | 522 nm | 1~400 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
561 NM Yellow Green Laser.
15 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-XS-561 | 561 nm | 1~80 mW | <2%, <1% | TEM00 | <1%, (<0.5%,0.25% optional) | <1.2 | <1.0 | >100:1, (Vertical ± 5 degree) | <5 | 10-35 | 12V/6.67A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-S-561 | 561 nm | 1~80 mW | – | TEM00 | – | <1.2 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | – | >10000 | <0.1 | <1.0 | <8 | 7g laterally, 15g vertically | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-561 | 561 nm | 80~200 mW | – | TEM00 | – | – | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | – | – | >10000 | <0.1, <0.003 | <1.0 | <8 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-FN-561 | 561 nm | 200~400 mW | <3%, <2%, <1% | TEM00 | – | – | – | – | <5 | – | – | >10000 | – | <1.5 | <8 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | Datasheet |
| MLL-U-561-SM | 561 nm | 1~40 mW | – | TEM00 (single mode fiber output) | <1% | <1.1 | – | – | <10 | – | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | Datasheet |
| MLL-S-561-AOM | 561 nm | 1~40 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-561 | 561 nm | 1~900 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-561(FC) | 561 nm | 1~1800 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-561 | 561 nm | 300~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-561-AOM | 561 nm | 1~600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-S-561 | 561 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-U-561 | 561 nm | 80~300 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-W-561A | 561 nm | 1~2 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-H1-561 | 561 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-561 | 561 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
High Power Laser |
21 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | Ave power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (220-240AC) | Expected lifetime (hours) | Macro-Pulse duration (us) | Macro-Rep. rate | Micro-Pulse duration (ns) | Power stability (rms) | Power supply (110/220VAC) | Expected lifetime (pulses) | Single pulse energy (mJ) | Power stability (rms, 4 hours±3℃) | Pulse duration | Pulse duration (ns) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HPL-1064-CW | 1064 nm | 50-100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1319-CW | 1319 nm | 20-50 W | – | – | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-CW | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-Q | 532 nm | 20-30 W | 10-20 kHz | ~100 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-QM | 532 nm | 30-100 W | 10-20 kHz | ~100 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-QL | 532 nm | 100-200 W | 15 kHz | ~100 ns | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 556 | 556 nm | 20-50 W | 10-20 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 589 | 589 nm | 1-50 W | 4 / 14 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| LGS-589.159-PS | 589.159 nm | 1-25 W | 100±1 MHz | Macro <160 us Micro <1 ns | – | – | – | <15 | Water cooled | 15-35 | – | – | <160 | 500Hz | <1 | <5%, <3% | PSU-LGS-PS | 109 | – | – | – | – | Datasheet |
| 660 | 660 nm | 1-50 W | 5 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-660-QM | 660 nm | 50-100 W | 10-20 kHz | ~150 ns | – | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q*2 & PSU-HPL-CW*2 | >10000 | – | – | – | – | – | – | 10-20 | <5%, <3% | – | – | Datasheet |
| HPL-1064B-PA | 1064 nm | 4-20 W | 0.2 kHz | ~10 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-1064A-PB | 1064 nm | 1-10 W | 0.5 kHz | ~10 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-1064B-PB | 1064 nm | 10-60 W | 0.5 kHz | ~10 ns | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-1064-Q | 1064 nm | 50-100 W | 10-20 kHz | ~100 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW*2 | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1064-QM | 1064 nm | 100-300 W | 10-20 kHz | ~300 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW*2 | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1319 | 1319 nm | 20-50 W | 10-20 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1319-QM | 1319 nm | 50-100 W | 10-20 kHz | ~250 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW*2 | >10000 | – | – | – | – | – | – | 5-10 | – | – | – | Datasheet |
| HPL-1319-Q | 1319 nm | 20-50 W | 10-20 kHz | – | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | 2-5 | – | – | – | Datasheet |
| HPL-556-Q | 556 nm | 20-50 W | 10-20 kHz | – | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | 2-5 | – | ~100 | – | Datasheet |
| HPL-589-Q | 589 nm | 1-50 W | 4 / 14 kHz | – | <3%, <2%, <1% | – | <3 | <15 | Water cooled | 15-35 | – | >10000 | – | – | – | – | PSU-HPL-Q-I/PSU-HPL-Q-II | – | – | – | – | 150±50 | Datasheet |
| HPL-660-Q | 660 nm | 1-50 W | 5 kHz | – | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15~35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | – | – | – | – | – | – | 1-10 | – | – | ~150 | Datasheet |
Infrared Laser, 1047 NM Infrared Laser Module, Infrared DPSS Lasers.
8 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power supply (12VDC) | Spectral line width (nm) | Power stability (rms, 4 hours , ±3°C) | Power stability (rms, over 4 hours) | Warm-up time(minutes) | M2 factor | Pointing stability after warm-up(mrad) | Cooled method | Operating temperature (℃) | Power supply (90-264VAC) | Warranty period | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1047-SU | 1047 nm | 1~500 mW | TEM00 | Single | <1MHz | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-1047-SU | 1047 nm | 1~1000 mW | TEM00 | – | – | <1.5 | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1047 | 1047 nm | 1~1000 mW | TEM00 | – | – | <1.5 | – | <2.0 | – | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | <0.1 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1047 | 1047 nm | 1~1000 mW | TEM00 | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-U-1047-SU | 1047 nm | 1~4 W | TEM00 | – | – | <1.5 | ~1.0 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | <3%, <2%, <1% | – | – | – | – | – | – | – | – | Datasheet |
| MIL-V-1047 | 1047 nm | 4~8 W | Near TEM00 | – | – | – | – | – | >100:1 | – | – | – | – | – | – | 10000 | – | – | – | – | <1%, <2%,<3% | <10 | <2.0 | <0.05 | Air cooled | 10~35 | PSU-AOM (3U) | 1 year | Datasheet |
| FC-1047 | 1047 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1047(FC) | 1047 nm | 1~7200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1053 NM Infrared Laser Module, Infrared DPSS Lasers.
9 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Power stability (rms, 4 hours , ±3℃) | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Relative intensity noise (rms,10Hz-3MHz) | Pointing stability (urad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1053-SU | 1053 nm | 1~1500 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1053 | 1053 nm | 1~1500 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1053-LN-L | 1053 nm | 1~10 W | TEM00 | – | <1.1 | – | <30 | – | – | – | >10000 | – | – | <2%, <1%, <0.5% | SLM | 1-100% | <0.004 | <0.1%, <0.05% | <±200 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | Air cooled or Water cooled | 15-30 | 110/220VAC | – | – | Datasheet |
| FL-1053-LN-H | 1053 nm | 10~35 W | TEM00 | – | TEM00, <1.1 | – | <30 | – | – | – | >10000 | – | – | <1%, <0.5% | SLM | 1-100% | <0.004 | – | – | Collimator | <3 | Metal | 4±1 (Collimator output) | >15, after PM fiber | Air cooled (≤20W) / Water cooled (≤35W) | 15-30 | 110/220VAC | <0.1%, <0.05% | <5 / <10 | Datasheet |
| FC-1053 | 1053 nm | 1~3600 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1053(FC) | 1053 nm | 1~7200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-H-1053 | 1053 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-U-1053-SU | 1053 nm | 1.5~4 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-1053SLD | 1053 nm | 1~8 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1122 NM Infrared Laser Module,infrared Lasers.
6 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power supply (12VDC) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1122-SU | 1122 nm | 1~250 mW | TEM00 | Single | <1MHz | <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MLL-U-1122-SU | 1122 nm | 1~300 mW | TEM00 | – | – | <1% | <1.5 | – | – | – | <5 | – | – | 10~35 | PSU-H-FDA | – | >10000 | PSU-SR-OEM (12V/25A) | – | Datasheet |
| MIL-H-1122 | 1122 nm | 1~1000 mW | TEM00 | – | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MIL-U-1122-SU | 1122 nm | 1000~1200 mW | TEM00 | – | – | – | <1.5 | ~1.0 | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| FC-1122 | 1122 nm | 1~1080 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1122(FC) | 1122 nm | 1~6300 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1177 NM Infrared Laser Module,infrared Lasers.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1177 | 1177 nm | 1~400 mW | TEM00 | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser,1342 NM DPSS Infrared Laser, Infrared Laser Pointer.
10 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Power supply (90-264VAC) | Power supply (12VDC) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-1342-SU | 1342 nm | 1~500 mW | TEM00 | Single | <1MHz | <1% | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-1342 | 1342 nm | 500~5000 mW | TEM00 | Single | – | <0.5% | <1.3 | ~1.5 | – | >100:1, Vertical (Horizontal optional) | – | – | – | 20-30 | – | – | >10000 | <3%, <2%, <1% | <5MHz | <8 | WCH-580 | PSU-W-FDA | – | – | – | – | – | Datasheet |
| MLL-U-1342-SU | 1342 nm | 1~2000 mW | TEM00 | – | – | <1% | <1.2 | ~1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | – | – | – | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MLL-H-1342 | 1342 nm | 1~2000 mW | TEM00 | – | – | <1% | <1.5 | – | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | – | <0.1 | – | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | Datasheet |
| MIL-H-1342 | 1342 nm | 1~2000 mW | TEM00 | – | – | – | <1.5 | – | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-U-1342-SU | 1342 nm | 2~3 W | TEM00 | – | – | – | <1.5 | ~1.0 | – | – | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MIL-N-1342 | 1342 nm | 3~4 W | Near TEM00 | – | – | – | 3-6 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | >10000 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-V-1342 | 1342 nm | 1~6 W | TEM00 | – | – | – | ＜1.3 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | – | 10-35 | PSU-W-LED | – | >10000 | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <3.0 | <20 | Datasheet |
| FC-1342 | 1342 nm | 1~2700 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-1342(FC) | 1342 nm | 1~5500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1413 NM Infrared Laser Module, DPSS Infrared Lasers.
1 model| Model | Wavelength | Output / average power | Transverse mode | M2 | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-H-1413 | 1413 nm | 1~300 mW | TEM00 | <1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
Infrared Laser, 1444 NM Infrared Laser Module, DPSS Infrared Lasers.
2 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1444-SU | 1444 nm | 1~400 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | Datasheet |
| MIL-U-1444-SU | 1444 nm | 1~400 mW | TEM00 | – | <1.5 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | ~1.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser,1450 NM Infrared Diode Lasers,infrared Diode Laser System.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1450 | 1450 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | Datasheet |
| MLL-III-1450-SM | 1450 nm | 1~15 mW | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | Datasheet |
Infrared Laser,1470 NM Infrared Diode Lasers,infrared Diode Laser System.
10 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power stability (rms, over 4 hours) | M2 factor | Spectral linewidth (MHz) | Beam divergence, full angle (mrad) | Operating temperature (℃) | Power supply (85-264VAC) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1470 | 1470 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-H-1470 | 1470 nm | 500~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1470 | 1470 nm | 1~500 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1470DFB-SM | 1470 nm | 1~15 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1470R | 1470 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1470-SM | 1470 nm | 1~15 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1470 | 1470 nm | 500~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1470 | 1470 nm | 1~500 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1470-SM | 1470 nm | 1~15 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1470DFB | 1470 nm | 1~20 mW | – | – | – | – | – | – | – | <5 | – | – | – | 10000 | – | <3%, <2%, <1%, <0.5% | <1.1 | ~3 | <1.5 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
Infrared Laser,1532 NM Infrared Diode Lasers, Infrared Fiber Coupled Laser System.
3 models| Model | Wavelength | Output / average power | Spectral line width (nm) | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber | M2 after fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1532 | 1532 nm | 1~800 mW | <0.5 | <2%, <1%, <0.5% | Multimode | <1%, <0.5% | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| MLL-III-1532-SM | 1532 nm | 1~15 mW | – | <2%, <1%, <0.5% | TEM00 | <1%, <0.5% | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | 1m | ~1.1 | Datasheet |
| FC-OEM-1532 | 1532 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser,1550 NM Infrared Diode Lasers, Infrared Laser System.
21 models| Model | Wavelength | Output / average power | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Operating temperature (°C) | Storage temperature (°C) | Humidity (%) | Weight (g) | Transverse mode | Beam divergence, full angle (mrad) | Expected lifetime (hours) | Warranty (years) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | Power stability(rms, over 4 hours) | Warm-up time | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Dimensions of laser head | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | M2 after fiber | Warm-up time (minutes) | Cooled method | Power supply (100-240VAC) | Noise of amplitude (rms, 20Hz-20MHz) | Spectral line width (MHz) | M2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1550 | 1550 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1550 | 1550 nm | 1~10 mW | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -10°C to +45°C | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-FP-1550 | 1550 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-1550 | 1550 nm | 1~15 mW | – | – | – | Cable with flying leads | – | – | – | – | Near TEM00 | <3 | 10000 | 1 | 3VDC (TTL10kHz, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-FC-1550 | 1550 nm | 1~500 mW | – | – | – | 9 pin connector | – | – | – | – | Multimode | <10 | 10000 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-1550 | 1550 nm | 1~2000 mW | – | – | – | 9 pin connector | – | – | – | – | Multimode | <10 | 10000 | 1 | – | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | <5%, <3%, <1% | minutes / <10 | 100-240VAC | 12VDC | 92(L)×40(W)×40(H)mm3 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550 | 1550 nm | 1~600 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | Datasheet |
| MDL-III-1550DFB-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | Datasheet |
| MDL-III-1550L | 1550 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550R | 1550 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1550-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | Datasheet |
| MDL-N-1550 | 1550 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-W-1550 | 1550 nm | 100~2000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-H-1550 | 1550 nm | 600~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1550 | 1550 nm | 1~600 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | Datasheet |
| MLL-III-1550L | 1550 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-1550-SM | 1550 nm | 1~180 mW | – | – | – | – | 10-35 | – | – | – | TEM00 | – | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | ~1.1 | <5 | Conduction | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | Datasheet |
| SF-D-1550 | 1550 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| SF-III-1550 | 1550 nm | 1~40 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-1550DFB | 1550 nm | 1~50 mW | – | – | – | – | 25±3 | – | – | – | TEM00 | <1.5 | >10000 | – | – | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | – | – | – | – | – | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | Datasheet |
1645 NM Infrared Solid State Laser
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1645 | 1645 nm | 1~1000 mW | <5%, <3% | Near TEM00 | <3 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Infrared Diode Laser AT 1910 NM.
3 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1910 | 1910 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | – | – | Datasheet |
| MIL-N-1910 | 1910 nm | 1~2000 mW | – | Near TEM00 | <2 | <10 | 15-30 | PSU-H-LED or PSU-H-FDA | – | >10000 | – | <2%, <1% | Air Cooled | Datasheet |
| MIL-W-1910 | 1910 nm | 1~13 W | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser AT 1985 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-N-1990 | 1985 nm | 1~2000 mW | <2%, <1% | Near TEM00 | <2 | <10 | Air Cooled | 15-30 | PSU-H-LED or PSU-H-FDA | >10000 | Datasheet |
| MIL-W-1990 | 1985 nm | 1~11 W | – | – | – | – | – | – | – | – | Datasheet |
Infrared Diode Laser AT 2000 NM.
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2000 | 2000 nm | 1~300 mW | <2%, <1%, <0.5% | Multimode | <5.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | Datasheet |
| MDL-XF-2000 | 2000 nm | 300~1000 mW | – | Multimode | <5.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | 10-35 | Datasheet |
Infrared Laser AT 2096 NM
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Ave power stability (rms, 4 hours±3℃) | Rep.rate (kHz) | Single pulse energy (µJ) | Power supply | during operations, etc. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-W-2096 | 2096 nm | 1~2500 mW | <5%, <3% | <6 | <10 | Air Cooled | 15-35 | PSU-W-LED or PUS-W-FDA | >10000 | – | – | – | – | – | Datasheet |
| OEM-AO-2096 | 2096 nm | 1~15 W | – | <5 | – | Water cooled | 10-30 | – | >10000 | <5%, <3% | 10 | 100-1500 | PSU-MIR (3U) | – | Datasheet |
| OEM-IR-2096 | 2096 nm | 1~20 W | <5%, <3% | <3 | <10 | – | 10-30 | – | >10000 | – | – | – | PSU-MIR (3U) | Cooled method / Water cooled | Datasheet |
Infrared Diode Laser AT 2200 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-2200 | 2200 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <5. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 3800 NM.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MIL-V-3800 | 3800 nm | 1~250 mW | <3%, <2% | <5 | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-W-3800 | 3800 nm | 250~2800 mW | – | – | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
| MIL-PS-3810 | 3800 nm | 1~600 mW | – | – | – | – | – | – | – | Datasheet |
786 NM Infrared Solid State Laser
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | Single pulse energy (nJ) | Rep. rate (MHz) | Ave power stability (rms, 4 hours±3℃) | pulse | M2 factor | Polarization ratio | Cooled method | Frequency doubler | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-775~790 | 786 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| CW-760~840 | 786 nm | 1~2000 mW | – | TEM00 | – | <10 | 10-35 | 12V/6.67A | – | >10000 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | >100:1 Vertical | Air cooled | LASER HEAD (780) / POWER SUPPLY | Datasheet |
| CW-760-840 | 786 nm | 1~3000 mW | – | TEM00 | – | <10 | 10-35 | 12V/6.67A | – | >10000 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | <1.2 | >100:1 Vertical | Air cooled | LASER HEAD (780) / POWER SUPPLY | Datasheet |
914 NM Infrared Laser.
6 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Power supply (12VDC) | Spectral line width (nm) | Power stability (rms, 4 hours , ±3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-U-914-SU | 914 nm | 1~100 mW | TEM00 | Single | <1MHz | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | <±200 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | Datasheet |
| MLL-U-914-SU | 914 nm | 1~400 mW | TEM00 | – | – | <1.2 | ~1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MLL-H-914 | 914 nm | 400~800 mW | TEM00 | – | – | <1.5 | – | <2.0 | – | <5 | – | – | 10-35 | PSU-H-FDA | – | >10000 | <1% | PSU-SR-OEM (12V/25A) | <0.1 | – | Datasheet |
| MIL-H-914 | 914 nm | 1~800 mW | TEM00 | – | – | <1.5 | ~1.2 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | Datasheet |
| MIL-U-914-SU | 914 nm | 800~1700 mW | TEM00 | – | – | <1.5 | ~1.0 | – | >100:1, Horizontal (Vertical optional) | <5 | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | <3%, <2%, <1% | Datasheet |
| PGL-LF-914 | 914 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 946 NM Infrared Laser Module, DPSS Infrared Lasers.
8 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Power stability (rms, 4 hours , ±3°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-946-SU | 946 nm | 1~300 mW | TEM00 | <1% | <1.5 | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | Datasheet |
| MLL-H-946 | 946 nm | 300~800 mW | TEM00 | <1% | <1.5 | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | Datasheet |
| MIL-H-946 | 946 nm | 1~800 mW | TEM00 | – | <1.5 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | ~1.2 | >100:1, Horizontal (Vertical optional) | – | Datasheet |
| MIL-U-946-SU | 946 nm | 800~1500 mW | TEM00 | – | <1.5 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | ~1.0 | – | <3%, <2% | Datasheet |
| MIL-W-946 | 946 nm | 1.5~5 W | TEM00 | – | <1.5 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | ~1.2 | >100:1, Horizontal (Vertical optional) | – | Datasheet |
| FC-946 | 946 nm | 1~1350 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MIL-946(FC) | 946 nm | 1~4500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-946 | 946 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
607 NM RED Laser.
10 models| Model | Wavelength | Output / average power | Transverse mode | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | Power stability (rms, over 4 hours) | M2 factor | Power supply (90-264VAC) | Cooled method | Cooled method (Water Cooled) | Operating temperature (℃) | Fiber connector | Fiber jacket | Fiber length | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-607 | 607 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-607 | 607 nm | 200~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-607 | 607 nm | 1~600 mW | TEM00 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-U-607-SU | 607 nm | 1~500 mW | TEM00 | >100:1, Vertical (Horizontal optional) | <5 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | – | >10000 | <2%, <1%, <0.5% | <1.2 | <1.0 | <1.5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-607 | 607 nm | 500~800 mW | TEM00 | – | <5 | – | – | – | – | >10000 | – | – | – | <1.5 | <0.05 | 10-35 | DC-30kHz; TTL and Analog modulation optional | <2%, <1%, 0.5% | <1.2 | PSU-H-LED/PSU-H-FDA/PSU-SR | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-607-H | 607 nm | 800~1800 mW | TEM00 | – | <5 | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <1.2 | – | <1.5 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-607-A | 607 nm | 1.8~2 W | Near TEM00 (TEM00 optional) | – | <10 | – | 10-35 | PSU-DP-A | – | >10000 | <3%, <2%, <1% | – | <3.0 | – | – | – | – | – | – | – | Air Cooled | – | – | – | – | – | – | Datasheet |
| MRL-DP-607-B | 607 nm | 2~3.5 W | Near TEM00 (TEM00 optional) | – | <10 | – | – | PSU-W-FDA/ PSU-W-LED | – | >10000 | <3%, <2%, <1% | – | ~3.0 | – | – | – | – | – | – | – | – | WCH-580 | 10-35 | – | – | – | – | Datasheet |
| MRL-DP-607-C | 607 nm | 3.5~7.5 W | Multi mode | – | <10 | – | – | – | 12V/ 25A | >10000 | <3%, <2%, <1% | – | ~3.0 | <5.0 | – | – | – | – | – | – | – | WCH-580 | 10-35 | – | – | – | – | Datasheet |
| MRL-FN-607-SM | 607 nm | 1~1000 mW | TEM00 | – | <10 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | – | >10000 | <3%, <2%, <1% | <1.2 | – | – | – | 10-35 | – | – | – | – | – | – | – | FC/APC | PVC | 1m | DC-1kHz; TTL and Analog optional | Datasheet |
627 NM RED Diode Laser.
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Cooled method | Warm-up time (minutes) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-627-SF | 627 nm | 1~200 mW | TEM00 | ~3.0 | >100:1 | Air Cooled/ Water Cooled | <10 | PSU-SF | >10000 | – | – | – | Datasheet |
| MDL-III-627 | 627 nm | 1~300 mW | Multimode | – | – | Conduction | <5 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <2%, <1%, <0.5% | <3.0×0.5 | 10-35 | Datasheet |
671 NM RED Laser.
14 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | Power Stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | measurement, holography, laser printing, chip | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Polarization ratio (optional) | Fiber core diameter | Fiber Jacket | Cooled method | Modulation option | Beam diameter at the aperture( 1/e2, mm) | Shock tolerance (6ms) | Modulation optional | Power stability (rms, 4 hours±3°C) | Power supply (90-264VAC) | Operating voltage(VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-671 | 671 nm | 1~500 mW | <3%, <2%, <1% | <0.1, <0.003 | TEM00 | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-671 | 671 nm | 500~1000 mW | – | – | TEM00 | – | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA | – | >10000 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-671 | 671 nm | 1~1.5 W | <3%, <2%, <1% | <0.1 | – | – | ~3.0 | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA | – | >10000 | – | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-671 | 671 nm | 1.5~5 W | – | – | TEM00 | <1.3 | – | – | >50:1(>100:1 optional),Vertical(Horizontal optional) | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | – | <3%, <2%, (<1% optional) | <1% | <1.5 | <20 | Cooled method / Water Cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-671-SM | 671 nm | 1~250 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | <1% | – | – | – | 0.10-0.15 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-671-SM | 671 nm | 250~3000 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-30 | PSU-W-LED | – | ＞10000 | – | – | <3%, <2%, (<1% optional) | <1% | – | – | – | – | SM fiber (PM fiber optional) | FC/APC | – | 1m | – | >50:1 after PM fiber | 4um,0.10NA | PVC, Metal optional | Air Cooled (Water Cooled optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | Datasheet |
| MRL-S-671 | 671 nm | 1~200 mW | – | – | TEM00 | <1.2 | – | – | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | PSU-A-F/PSU-A-D | – | >10000 | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | <1.0 | 7g laterally, 15g vertically | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MRL-U-671 | 671 nm | 200~500 mW | <2%, <1%, <0.5% / <3%, <2% | – | TEM00 | <1.2 | – | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | – | 10-35 | PSU-H-LED/PSU-H-FDA/PSU-SR | – | >10000 | <8 | PSU-SR-OEM(12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-FN-671 | 671 nm | 500~1000 mW | – | – | TEM00 | – | <1.5 | – | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | PSU-H-FDA/ PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | Datasheet |
| MRL-V-671 | 671 nm | 1~5 W | – | – | TEM00 | <2.0 | – | – | >50:1(>100:1 optional), Vertical(Horizontal optional) | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | – | <3%, <2%, (<1% optional) | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-S-671-SM | 671 nm | 1~100 mW | – | – | TEM00 (single mode fiber output) | – | – | – | – | <10 | – | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | 0.10-0.12 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | – | >50:1 after PM fiber | – | – | – | – | – | – | – | – | <3%, <2%, <1% / <3%, <2% | PSU-III-LED/ PSU-III-FDA | PSU-A-F-OEM (5V/5A) | Datasheet |
| MRL-V-671-SM | 671 nm | 100~3000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-III-671-AOM | 671 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-FN-671-AOM | 671 nm | 100~800 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
721 NM RED Laser.
10 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Power supply (90-264VAC) | Polarization Ratio | Operating voltage (VDC) | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-721 | 721 nm | 1~300 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <10 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-721 | 721 nm | 300~1000 mW | TEM00 | Single | <5MHz | <0.5% | – | – | – | 20-30 | – | >10000 | <3%, <2%, <1% | <1.3 | ~1.5 | >100:1, Vertical (Horizontal optional) | <8 | WCH-580 | PSU-W-FDA | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-721 | 721 nm | 1~800 mW | TEM00 | – | – | <1%, <0.5% | <5 | – | – | 10-35 | PSU-H-FDA | >10000 | <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM(12V/25A) | – | – | – | – | – | Datasheet |
| MRL-U-721-SU | 721 nm | 1~800 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <1.2 | <1.0 | >100:1, Vertical (Horizontal optional) | – | – | – | – | – | <2%, <1%, <0.5% | <1.5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-721 | 721 nm | 800~1000 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <1.5 | – | – | – | – | – | >100:1, Vertical (Horizontal optional) | – | <2%, <1%, <0.5% | – | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-721-H | 721 nm | 1~2 W | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | <1.5 | – | – | – | – | – | >100:1, Vertical (Horizontal optional) | – | <2%, <1%, <0.5% | – | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-DP-721-A | 721 nm | 1~3.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-721-B | 721 nm | 3.5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-DP-721-C | 721 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MRL-FN-721-SM | 721 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
501 NM Green Laser,Cyan Laser,Solid State Laser |
2 models| Model | Wavelength | Output / average power | Transverse mode | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-U-501-SF | 501 nm | 1~200 mW | – | – | – | – | – | – | – | – | |
| MGL-DF-501 | 501 nm | 200~600 mW | Near TEM00 | <5%, <3% | <5 | >100:1 | <10 | 15~30 | PSU-AOM (3U) | >10000 | Datasheet |
536 NM Green Laser, Green Solid State Laser |
2 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | M2 | Polarization ratio | Pointing stability after warm-up (mrad) | Cooled method (Water cooled) | Operating Temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-536 | 536 nm | 1~500 mW | TEM00 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | Datasheet |
| MGL-A-536 | 536 nm | 500~4000 mW | TEM00 | – | <10 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-W-FDA | >10000 | <3%, <2% (<1% optional) | <1.5 | >100:1 Horizontal (Vertical optional) | <0.05 | WCH-580 | 10-35 | Datasheet |
537 NM Green Laser, Green Solid State Laser |
1 model| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-537 | 537 nm | 1~30 mW | TEM00 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | Datasheet |
540 NM Green Laser, Green Solid State Laser |
5 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Free space output power (mW) | Fiber coupled output power (mW) | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | Pulse duration (ps) | Rep. rate | Operating voltage (VDC) | Fundamental Frequency | stability, good beam profile, ultra compact, | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-FN-540 | 540 nm | 1~500 mW | TEM00 | <1.5 | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-540-SLM | 540 nm | 1-2000 mW | TEM00 | – | <30 | – | – | – | >10000 | 1-2000 | 1-500 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | Air cooled or Water cooled | 15-30 | 110/220V | – | – | – | – | – | – | – | Datasheet |
| FL-540-LN-L | 540 nm | 1~2000 mW | TEM00 | – | <30 | – | – | – | >10000 | 1-2000 | 1-500 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | Air cooled or Water cooled | 15-30 | 110/220V | <2%, <1% | <0.002 | – | – | – | – | – | Datasheet |
| FL-540-Pico | 540 nm | 1-1000 mW | – | – | <15 | – | – | – | >10000 | – | – | – | – | – | – | <1.5 / <2 | – | – | – | >15 Horizontal (Vertical optional) | Air cooled | 15-35 | – | <5%, <3%, <2% | – | 100-900 | 100kHz-20MHz / 100kHz-1MHz | 12V/11.5A | Second harmonic | – | Datasheet |
| FL-540-Nano | 540 nm | 1-1000 mW | – | – | <15 | – | – | – | >10000 | – | – | – | – | – | – | <1.8 | – | – | – | >15 Horizontal (Vertical optional) | Air cooled | 15-35 | – | <3%, <2% | – | – | – | 12V/11.5A | Second harmonic | Rep. rate3 / 100kHz-1MHz | Datasheet |
545 NM Green Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms,20Hz-20MHz) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | Modulation optional | Power supply (12VDC) | Power stability (rms, 4 hours±3℃) | Polarization Ratio | Operating Temperature (°C) | Power Stability (rms, 4 hours ± 3°C) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-543 | 543 nm | 1~200 mW | <3%, <2%, <1% | TEM00 | Single | <1MHz | <1%, <0.5% | <1.2 | >100:1, Vertical (Horizontal optional) | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-543 | 543 nm | 1~200 mW | – | TEM00 | – | – | – | <1.5 | – | – | – | 10-35 | PSU-H-FDA | >10000 | <5 | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-U-543 | 543 nm | 1~200 mW | – | TEM00 | – | – | – | – | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <5 | – | – | <1.2 | <1.0 | <1.5 | <8 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | – | – | Datasheet |
| MGL-FN-543 | 543 nm | 1~1000 mW | – | TEM00 | – | – | – | <1.5 | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | <5 | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | <3%, <2%, <1% | >100:1, Vertical (Horizontal Optional) | 10-35 | – | – | Datasheet |
| MGL-N-543 | 543 nm | 1~1.5 W | – | TEM00 | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | <10 | – | – | <3.0 | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <20 | Datasheet |
Infrared Laser, 1050 NM Infrared Laser Module, Infrared DPSS Lasers.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Line width(nm) | Fiber length (m) | Polarization state | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III-1050-SLD | 1050 nm | 1~17 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1050-SLD-SM | 1050 nm | 1~17 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-1050-SLM | 1050 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | Datasheet |
| FL-1050-LN-L | 1050 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <0.004 | <±200 | – | – | – | Datasheet |
| FL-1050-CW | 1050 nm | 1~100 W | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | <2nm | 1 | Random | Datasheet |
1270nm DFB Laser, Infrared Laser, DPSS Laser |
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | M2 after fiber | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | ultra compact, long lifetime, | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1270(FC) | 1270 nm | 1~4500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1270 | 1270 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1270-SM | 1270 nm | 1~10 mW | <2%, <1%, <0.5% | TEM00 | – | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | 1m | ~1.1 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1270 | 1270 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-1270 | 1270 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1270-SM | 1270 nm | 1~10 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1270DFB-SM | 1270 nm | 1~10 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1270 | 1270 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-W-1270H | 1270 nm | 5~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1270-CW | 1270 nm | 1~1000 mW | – | – | – | <15 | Air cooled | – | – | >10000 | – | – | – | <3%, <2%, <1% | >±5nm | M2 / <1.3 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | 15-35 | 110/220VAC | Datasheet |
1610nm DFB Laser, Infrared Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MIL-W-1600 | 1600 nm | 100~2000 mW | <5%, <3% | Air Cooled | Datasheet |
1700 NM IR Laser, Infrared Diode Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1700 | 1700 nm | 1~100 mW | <1%, <2%, <3% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | 10000 | 1 year | – | – | Datasheet |
| MIL-W-1700 | 1700 nm | 100~3000 mW | – | – | – | – | – | – | – | – | – | <5%, <3% | Air Cooled | Datasheet |
1850 NM IR Laser, Infrared Diode Laser |
4 models| Model | Wavelength | Output / average power | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1850(FC) | 1850 nm | 1~600 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
| FC-1850 | 1850 nm | 1~900 mW | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-1850 | 1850 nm | 1~700 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <2%, <1%, <0.5% | <1%, <0.5% | Datasheet |
| MDL-F-1850 | 1850 nm | 1~700 mW | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | Datasheet |
Infrared Diode Laser AT 1940 NM.
6 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | Power stability (rms, 4 hours±3℃) | made features of ultra compact, long lifetime | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MXL-1930(FC) | 1930 nm | 1~510 mW | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-1930 | 1930 nm | 1~15 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1930 | 1930 nm | 1~600 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | – | – | – | Datasheet |
| MIL-N-1940 | 1940 nm | 1~2000 mW | – | Near TEM00 | <2 | <10 | 15-30 | PSU-H-LED or PSU-H-FDA | – | >10000 | – | <2%, <1% | Polarizaion ratio | Air Cooled | Datasheet |
| MIL-W-1940 | 1940 nm | 1~11 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1940 | 1940 nm | 1~600 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | – | – | – | Datasheet |
278nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MPL-FN-278-L/1uJ | 278 nm | 1~5 mW |
262nm UV Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| AO-U-262/1-80uJ | 262 nm | 1-250 mW |
369 NM UV Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MSL-T-369 | 369 nm | 1~80 mW |
582 NM Green Laser,Cyan Laser,Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-U-582-SF | 582 nm | 1~100 mW |
515 NM Green Laser.
24 models| Model | Wavelength | Output / average power | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Operating voltage (VDC) | Transverse mode | M2 | Pointing Stability Over Temperature (urad/°C) | Power Stability (rms, 4 hours ± 3°C) | Longitudinal mode | Noise of amplitude (rms,20Hz-20MHz) | Beam divergence, full angle (mrad) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Power stability (rms, over 4 hours) | Pulse duration (ps) | Rep. rate | Delivery fiber length(cm) | Fundamental Frequency | Delivery fiber length (cm) | Single pulse energy (uJ) | Rep. rate (kHz) | Ave power stability (rms, 4 hours±3℃) | Rep. rate (MHz) | features of short pulse duration, high repetition | Single pulse energy (nJ) | Fiber | pulse | M2 factor | Pulse duration (fs) | pulse duration, | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-515(FC) | 515 nm | 1~400 mW | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-515 | 515 nm | 1~90 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-515 | 515 nm | 1~50 mW | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | – | PSU-H-FDA | >10000 | <3%, <2%, <1% | <0.1 | <3.0 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-515 | 515 nm | 1~100 mW | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-515 | 515 nm | 100~150 mW | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | – | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | – | TEM00 | <1.2 | <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-W-515A | 515 nm | 150~500 mW | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | – | PSU-W-LED | – | – | – | – | – | Near TEM00 | – | <20 | <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-515 | 515 nm | 1~50 mW | >100:1, Vertical (Horizontal optional) | – | 10-35 | – | PSU-H-FDA | >10000 | <3%, <2%, <1% | <1MHz | – | – | TEM00 | – | – | – | Single | <1%, <0.5% | <1.2 | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-LN-L | 515 nm | 1~2000 mW | – | <30 | – | – | – | >10000 | – | – | – | – | TEM00 | <1.1 | – | – | SLM | – | – | – | – | 1-2000 | 1-500 | <2%, <1% | 1-100% | <0.002 | <0.1%, <0.05% | <±200 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | Air cooled or Water cooled | 15-30 | 110/220V | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-PS | 515 nm | 1-200 mW | – | – | – | – | – | >10000 | – | – | – | 12V/11.5A | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | >15 Horizontal (Vertical optional) | Air cooled | 15-35 | – | <3%, <2% | <10 | 20-50MHz | 60 | Second harmonic | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-Pico | 515 nm | 1-1000 mW | – | <15 | – | – | – | >10000 | – | – | – | 12V/11.5A | – | <1.5 / <2 | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | >15 Horizontal (Vertical optional) | Air cooled | 15-35 | – | – | 100-900 | 100kHz-20MHz / 100kHz-1MHz | – | Second harmonic | 60 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-Nano | 515 nm | 1-1000 mW | – | <15 | – | – | – | >10000 | – | – | – | 12V/11.5A | – | <1.8 | – | – | – | – | – | – | – | – | – | <3%, <2% | – | – | – | – | – | – | – | >15 Horizontal (Vertical optional) | Air cooled | 15-35 | – | – | – | 100kHz-1MHz | – | Second harmonic | 60 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-H-515-PS | 515 nm | 1-5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-FG-515A | 515 nm | 1-20 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | <1.3 | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | 10±1 | – | – | – | – | 1-40 | 500-1000 | <5%, <3% | – | – | – | – | – | – | – | – | Datasheet |
| PS-HG-515A | 515 nm | 1-20 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | <1.3 | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | 10-150 | – | – | – | – | 0.05-1 | – | – | 20-120 | Ave power stability (rms, 4 hours±3℃) / <5%, <3% | – | – | – | – | – | – | Datasheet |
| FS-H-515A | 515 nm | 1~100 mW | – | <10 | – | – | 12V/6.67A | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Air cooled | 10-35 | – | – | – | – | – | – | – | – | – | – | 80±1 | – | 1-1.25 | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | <1.2 | – | – | Datasheet |
| FS-H-515B | 515 nm | 100~1000 mW | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Air cooled | 10-35 | – | – | – | – | – | – | – | – | – | <2%, <1% | 80±1 | – | – | – | – | <1.2 | <150 | – | Datasheet |
| FS-H-515C | 515 nm | 1~10 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | – | – | – | – | – | – | – | <2%, <1% | 20-120 | – | – | Femtosecond / pulsed / laser / at | – | <1.2 | <250 | – | Datasheet |
| FS-H-515D | 515 nm | 10~30 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | – | – | – | – | – | – | – | <2%, <1% | 20-120 | – | – | Femtosecond / pulsed / laser / at | – | <1.2 | <250 | – | Datasheet |
| FS-H-515E | 515 nm | 30~60 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | – | – | – | – | – | – | – | <2%, <1% | 20-120 | – | – | Femtosecond / pulsed / laser / at | – | <1.3 | <250 | – | Datasheet |
| FS-F-515A | 515 nm | 1~2 W | – | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | – | – | – | – | – | 1-2 | – | – | 1 | – | – | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | <1.3 | – | – | Datasheet |
| FS-F-515B | 515 nm | 2~8 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | Femtosecond / pulsed / laser / at | – | <1.2 | <300 | – | Datasheet |
| FS-F-515C | 515 nm | 8~20 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-F-515D | 515 nm | 20~40 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 10-35 | – | – | – | – | – | – | – | – | 100-1000 | <2%, <1% | – | – | – | Femtosecond / pulsed / laser / at | – | <1.3 | <300 | – | Datasheet |
| FS-G-515A | 515 nm | 1~20 W | >100:1 Horizontal | <10 | – | – | RAD1PS | >10000 | – | – | – | – | TEM00 | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Water cooled | 15-35 | – | – | – | – | – | – | – | – | 50-1000 | <2%, <1% | – | – | – | – | – | – | <500 | high repetition | Datasheet |
556 NM Yellow Green Laser.
8 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | M2 | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-FN-556 | 556 nm | 1~200 mW | <3%, <2%, <1% | TEM00 | <1.5 | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | Datasheet |
| MGL-U-556 | 556 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-556 | 556 nm | 200~800 mW | – | TEM00 | – | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | <1.5 | >100:1, Vertical (Horizontal optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-W-556A | 556 nm | 800~3000 mW | – | Near TEM00 | – | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | <5%, <3%, (<2% optional) | 3-6 | <1.5 | <20 | Datasheet |
| MGL-556(FC) | 556 nm | 1~2300 mW | – | TEM00 | <1.0 | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | PSU-SR-OEM (12V/25A) | >10000 | <1.5 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | <1.2 | – | – | Datasheet |
| FC-556 | 556 nm | 1~720 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-556-AOM | 556 nm | 1~80 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MGL-FN-556-AOM | 556 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Infrared Laser, 1030 NM Infrared Laser Module, Infrared DPSS Lasers.
39 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Operating voltage (VDC) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | M2 after fiber | Beam divergence (mrad) | Modulation optional | Longitudinal mode | Spectral line width (MHz) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Power stability (rms, 4 hours , ±3℃) | Fiber length(m) | Polarization ratio (dB) | Relative intensity noise (rms, 10Hz-10MHz) | Relative intensity noise (dBc/Hz) | Peak intensity noise (dBc/Hz) | Relaxation oscillation peak frequency (MHz) | Operating temperature (℃) | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | Beam diameter (mm) | Power supply (VAC) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Excess relative intensity noise (rms, 10Hz-3MHz) | laser radar, etc. Fiber length(m) | Single pulse energy (nJ) | Rep. Rate( | Ave power stability (rms, 4 hours±3℃) | Pulse duration (ns) | Fiber length (m) | Fiber Jacket | Power stability (rms, over 4 hours) | Pulse duration (ps) | Rep. rate | Operating voltage (VDC/VAC) | Single pulse energy (uJ) | pulse | Pulse | Rep. Rate | Rep. rate (MHz) | Beam quality(M2) | Rep. rate (kHz) | Rep. Rate (kHz) | Pulse duration | Pulse duration (fs) | M2 factor | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1030 | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1030L | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1030 | 1030 nm | 1~1000 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-1030 | 1030 nm | 1~100 mW | – | – | – | – | <5 | 10-35 | PSU-H-FDA | >10000 | – | – | <3%, <2% | <0.1 | ~2.0 | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1030-SM | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | <1%, <0.5% | – | – | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | TEM00 | Conduction | – | – | – | – | – | SM fiber, PM fiber optional | 6μm, 0.12NA | FC/PC, FC/APC optional | 1m | Metal, PVC optional | ~1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1030 | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030L | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030 | 1030 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-F-1030 | 1030 nm | 1~600 mW | – | – | – | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | TEM00 | – | – | – | ~1.5 | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030DFB-SM | 1030 nm | 1~200 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1030-SM | 1030 nm | 1~500 mW | <2%, <1%, <0.5% | – | – | <3.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Multimode | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1030 | 1030 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U-1030-SU | 1030 nm | 1~50 mW | – | – | <1.2 | – | <5 | 10-35 | PSU-H-FDA | >10000 | TEM00 | – | – | – | <1.0 | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | <1.5 | – | Single | <1MHz | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-SLM-Seed(1014-1120) | 1014 nm | 1~50 mW | – | – | <1.05 | – | – | – | – | >10000 | TEM00 | Conduction cooled | – | – | – | – | 12V/11.5A | – | – | FC/APC | – | PVC, Metal optional | – | – | – | – | – | – | – | <3%, <2%, <1% | 1 | >20, after PM fiber | <0.1%, <0.05%, (<0.03% optional) | <-140 (10MHz) | <-130 | 2-3 | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-SLM | 1030 nm | 1~10 W | – | – | <1.1 | – | <30 | – | – | >10000 | TEM00 | Air cooled or Water cooled | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | – | – | – | SLM | – | – | – | <2%, <1%, <0.5% | 1 | >15, after PM fiber | – | – | – | – | 15-30 | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | 4±1 (Collimator output) | 110/220VAC | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-LN-L | 1030 nm | 1~10 W | – | – | <1.1 | – | <30 | – | – | >10000 | TEM00 | Air cooled or Water cooled | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | – | – | – | SLM | – | – | – | <2%, <1%, <0.5% | 1 | >15, after PM fiber | – | – | – | – | 15-30 | 1-100% | <0.1%, <0.05% | – | 4±1 (Collimator output) | 110/220VAC | <0.004 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-LN-FA(1014-1120) | 1014 nm | 1~10 W | – | – | – | – | – | – | – | >10000 | – | Air cooled (≤30W) or Water cooled (≤50W) | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | – | – | – | – | – | – | – | <2%, <1%, <0.5% | – | >15, after PM fiber | – | – | – | – | 15-30 | – | – | – | 4±1 (Collimator output) | 110/220VAC | – | – | <0.03% | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-H-1030-PS | 1030 nm | 1~20 W | – | – | <1.2 | <1 | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | 1-500 | 20-120 | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-CW | 1030 nm | 1~100 W | – | – | <1.2 | <1 | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | 1-500 | 20-120 | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-S | 1030 nm | 1 uW | – | – | <1.2 | – | <5 | – | – | >10000 | – | Conduction | – | – | – | – | 12V/11.5A | – | – | FC/APC, Collimator optional | – | – | – | – | – | – | – | – | – | <3%, <2%, <1% | – | Random / >15 | – | – | – | – | 15-35 | – | – | – | 4±1 (Collimator output) | – | – | – | – | – | – | – | – | 5-100 (adjustable) | 1 | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-PS-Seed | 1030 nm | 0.5-1 mW | – | – | <1.2 | – | <15 | – | – | >10000 | – | – | – | – | – | – | 12V/11.5A | – | – | FC/APC | – | PVC, Metal optional | – | – | – | – | – | – | – | – | – | Random / > 15 | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 | – | <3%, <2%, <1% | <10 | 20-50MHz | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-PS | 1030 nm | 1-2000 mW | – | – | <1.2 | <1 | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | 1-500 | 20-120 | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-Pico | 1030 nm | 10-5000 mW | – | – | <1.2 / <1.8 | – | <15 | – | – | >10000 | – | Air cooled | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | – | – | – | – | – | – | – | <3%, <2% | – | Random / >15 | – | – | – | – | 15-35 | – | – | – | 4±1 (Collimator output) | – | – | – | – | – | – | – | – | – | 1 | – | – | 100-900 | 100kHz-20MHz | 12V/11.5A | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1030-Nano | 1030 nm | 0.5-10 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-FG-1030A | 1030 nm | 1~5 W | – | – | <1.3 | <1.5 | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | 1-10 | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-FG-1030B | 1030 nm | 5~40 W | – | – | <1.3 | <1.5 | <10 | – | RAD1PS | >10000 | TEM00 | – | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | 10-80 | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-HG-1030A | 1030 nm | 1~5 W | – | – | <1.3 | <1.5 | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | 1-250 | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-HG-1030B | 1030 nm | 5~50 W | – | – | <1.3 | <1.5 | <10 | – | RAD1PS | – | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | 1-2.5 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030A | 1030 nm | 1~500 mW | – | – | <1.2 | – | <10 | – | 12V/6.67A | >10000 | TEM00 | Air cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | 80±2 | – | – | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030B | 1030 nm | 500~3000 mW | – | – | <1.2 | – | <10 | – | RAD1PS | >10000 | TEM00 | Air cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | 6.25-30 | – | <2%, <1% | – | – | – | – | – | 80±2 | – | – | – | <150 | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030C | 1030 nm | 3~20 W | – | – | <1.2 | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | – | – | – | – | <250 | 20-120 | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030D | 1030 nm | 20~50 W | – | – | <1.2 | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | 20-120 | – | – | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-H-1030E | 1030 nm | 50~100 W | – | – | <1.3 | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | 20-120 | – | – | duration, / high | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-F-1030A | 1030 nm | 1~10 W | – | – | – | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | – | – | – | duration, / high | – | – | 1 | <1.3 | – | – | – | – | – | Datasheet |
| FS-F-1030B | 1030 nm | 10~20 W | – | – | – | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | – | – | – | – | <300 | – | – | <1.2 | 100-1000 | – | – | – | – | Datasheet |
| FS-F-1030C | 1030 nm | 20~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FS-F-1030D | 1030 nm | 50~100 W | – | – | – | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | – | – | – | – | – | – | – | – | – | – | – | – | <1.3 | – | 100-1000 | <300 | – | – | Datasheet |
| FS-G-1030A | 1030 nm | 1~10 W | – | – | – | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50-1000 | – | – | <800 | <1.3 | Datasheet |
| FS-G-1030B | 1030 nm | 10~40 W | – | – | – | – | <10 | – | RAD1PS | >10000 | TEM00 | Water cooled | – | – | – | >100:1 Vertical | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50-1000 | – | <800 | – | <1.3 | Datasheet |
Infrared Laser,1060 NM Infrared Diode Lasers,infrared Diode Laser System.
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Spectral line width (MHz) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-LN-1064 | 1064 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1064-SM | 1064 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1064 | 1064 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1064-SM | 1064 nm | 1~500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | Datasheet |
| MSL-III-1064L | 1064 nm | 1~120 mW | <2%, <1%, <0.5% | – | ~2.0 | <5 | – | – | PSU-III-FDA | >10000 | <100, (<50 optional) | <1%, <0.5% | <1.5 | 10-35 | Datasheet |
| MDL-NS-1064 | 1064 nm | 1~280 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | Datasheet |
| MDL-PS-1064 | 1064 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | Datasheet |
Infrared Laser,1310 NM Infrared Diode Lasers,infrared Diode Laser System.
21 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Warranty (years) | Operating voltage(internal PCB) | Operating temperature | Storage temperature | Humidity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1310(FC) | 1310 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-1310 | 1310 nm | 1~5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-1310 | 1310 nm | 1~200 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1310L | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | Near TEM00 | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1310 | 1310 nm | 10~800 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1310 | 1310 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-1310-SM | 1310 nm | 1~180 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1310DFB | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-1310 | 1310 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310L | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | Near TEM00 | <2.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310-SLD | 1310 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310 | 1310 nm | 10~800 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1310 | 1310 nm | 800~3000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310-SM | 1310 nm | 1~180 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310DFB-SM | 1310 nm | 1~180 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1310-SLD-SM | 1310 nm | 1~17 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1310 | 1310 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-1310 | 1310 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | Datasheet |
| PGL-VI-1310 | 1310 nm | 1~10 mW | – | Near TEM00 | <3 | – | – | – | – | 10000 | – | – | – | – | – | Cable with flying leads | – | – | – | 1 | 3VDC (TTL10kHz, optional) | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | Datasheet |
| PGL-FP-1310 | 1310 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-NS-1310 | 1310 nm | 1~10 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
Infrared Laser, 1313 NM Infrared Laser Module,infrared Lasers.
5 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Spectral line width (nm) | Beam divergence (mrad) | Modulation optional | Longitudinal mode | Spectral line width (MHz) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1313-SU | 1313 nm | 1~1000 mW | TEM00 | <1% | <1.2 | ~1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1313 | 1313 nm | 1~1000 mW | TEM00 | <1% | <1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <0.1 | <2.0 | – | – | – | – | – | – | Datasheet |
| MIL-H-1313 | 1313 nm | 1~1000 mW | TEM00 | – | <1.5 | – | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MIL-U-1313-SU | 1313 nm | 1000~2000 mW | TEM00 | – | <1.5 | ~1.0 | – | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | Datasheet |
| MSL-U-1313-SU | 1313 nm | 1~500 mW | TEM00 | <1% | <1.2 | <1.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | – | >10000 | – | <1.5 | – | Single | <1MHz | <8 | <±200 | PSU-SR-OEM (12V/25A) | Datasheet |
Infrared Laser, 1319 NM Infrared Laser Module,infrared Lasers.
6 models| Model | Wavelength | Output / average power | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Beam divergence (mrad) | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Longitudinal mode | Spectral line width (MHz) | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (urad /°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1319-SU | 1319 nm | 1~200 mW | TEM00 | <1% | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-1319-FL | 1319 nm | 1~1000 mW | TEM00 | <1% | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | – | >10000 | <3%, <2%, <1% | <1.0 | <1.5 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-U-1319-FL | 1319 nm | 1~1500 mW | TEM00 | – | <1.5 / <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | <3%, <2%, <1% | – | <1.5 | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-V-1319 | 1319 nm | 1~5 W | – | – | ＜1.3 | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | PSU-W-LED | – | >10000 | – | – | – | <3%, <2%, (<1% optional) | <3.0 | <20 | – | – | – | – | – | – | Datasheet |
| MIL-W-1319A | 1319 nm | 5~10 W | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | – | >10000 | – | – | – | <3%, <2%, (<1% optional) | <1.0 | <20 | – | – | – | – | – | – | Datasheet |
| MSL-U-1319-SU | 1319 nm | 1~100 mW | TEM00 | <1% | <1.2 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | – | >10000 | – | – | <1.5 | – | – | – | Single | <1MHz | <1.0 | <8 | <±200 | PSU-SR-OEM (12V/25A) | Datasheet |
Infrared Laser, 1573 NM Infrared Laser Module, DPSS Infrared Lasers.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Cooled method | |
|---|---|---|---|---|---|
| MLL-III-1573-SM | 1573 nm | 1~15 mW | – | – | |
| TEM-F-1573DFB | 1573 nm | 1~20 mW | – | – | |
| MIL-W-1573 | 1573 nm | 100~2000 mW | <5%, <3% | Air Cooled | Datasheet |
| MDL-III-1573-SM | 1573 nm | 1~15 mW | – | – | |
| MDL-III-1573DFB-SM | 1573 nm | 1~15 mW | – | – | |
| FC-OEM-1573 | 1573 nm | 1~15 mW | – | – |
Infrared Diode Laser AT 1870 NM.
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-H-1870 | 1870 nm | 1~800 mW | <1%, <2%, <3% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1KHz 1KHz-10KHz, 10KHz-30KHz optional | 10000 | 1 year | Datasheet |
Infrared Diode Laser AT 1900 NM.
3 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | TTL / Analog modulation | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-1900(FC) | 1900 nm | 1~400 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
| FC-1900 | 1900 nm | 1~10 W | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-1900 | 1900 nm | 1~500 mW | <3%, <2%, <1% | Multimode | <3. 0 | <5 | 10~35 | PSU-H-LED / PSU-H-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 10000 | 1 year | Datasheet |
RED Laser, 633 NM RED Laser, HE NE Laser |
18 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Cooled method | Spectral line width (MHz) | Operating temperature (℃) | Parameters of customed power supply | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Longitudinal mode | Current adjustment range | Spectral linewidth (nm) | Relative intensity noise (rms,10Hz-3MHz) | Frequency shift (MHz)(over ±2℃and 8hours ) | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-633(FC) | 633 nm | 1~70 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-633 | 633 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-C-633 | 633 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-LN-633 | 633 nm | 1~30 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-633L | 633 nm | 1~100 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | Near TEM00 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-633-SM | 633 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-633 | 633 nm | 1~30 mW | <2%, <1%, <0.5% | – | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-633L | 633 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-633-SM | 633 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-633 | 633 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-FP-633 | 633 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-III-633L | 633 nm | 1~30 mW | <2%, <1%, <0.5% | <1%, <0.5% | <1.5 | ~2.0 | <5 | – | PSU-III-FDA | >10000 | Near TEM00 | – | <100, (<50 optional) | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-E-633 | 633 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| TUN-628-637 | 628 nm | 1~40 mW | <3%, <2%, <1% | – | – | <1.0 | <5 | – | PSU-TUN | >10000 | Near TEM00 | – | – | 20-30 | TEC: 7-12kΩ | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-633-LN-L | 633 nm | 1~1500 mW | – | – | <1.1 | – | <30 | – | – | >10000 | TEM00 | Air cooled or Water cooled | – | 15-30 | – | 1mW-1.5W | 1-500 | <2%, <1% | SLM | 1-100% | <0.002 | <0.1%, <0.05% | <±200 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | Datasheet |
| MDL-NS-633 | 633 nm | 1~100 mW | <2%, <1%, <0.5% | – | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-633 | 633 nm | 1~50 mW | <2%, <1%, <0.5% | – | <1.5 / <1.2 | <1.0 | <5 | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-D-633 | 633 nm | 1~40 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
639 NM RED Solid State Laser.
14 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Warm-up time (minutes) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Pointing stability over temperature (μrad/°C) | Cooled method (water cooled) | Power stability (rms, 4 hours , ±3°C) | Spectral line width (MHz) | Beam divergence (mrad) | Polarization ratio | Operating voltage (VDC) | Power stability (rms, 4 hours±3℃) | Noise of amplitude (rms, 1Hz-20MHz) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Cooled method (Water Cooled) | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-FN-639 | 639 nm | 1~650 mW | TEM00 | Single | <1MHz | <1%, <0.5% | <10 | <8 | <±200 | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-639 | 639 nm | 650~3000 mW | TEM00 | Single | <5MHz | – | <15 | – | – | 20-30 | PSU-W-FDA | >10000 | <8 | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-DU-639-W | 639 nm | 1~750 mW | TEM00 | Single | – | <1%, <0.5% | <30 | <8 | – | 10-35 | PSU-SR | >10000 | – | WCH-580 | <3%, <2%, <1% | <1MHz | <1.5 | >100:1, Horizontal (Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-639 | 639 nm | 1~1500 mW | TEM00 | – | – | – | <5 | <8 | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-DP-639-A | 639 nm | 1500~2000 mW | Near TEM00 | – | <0.1, <0.003 | – | <10 | – | – | – | PSU-DP-A | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | <3%, <2%, <1% | <1% | <1.2 | Air Cooled | 10-35 | – | – | – | – | – | – | Datasheet |
| MLL-DP-639-B | 639 nm | 2000~8000 mW | Near TEM00 (TEM00 optional) | – | <0.003, <0.01, <0.1 | <1% | <10 | – | – | – | PSU-W-FDA | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | <3%, <2%, <1% | – | <3.0 | – | 10-35 | WCH-580 | – | – | – | – | – | Datasheet |
| MRL-U-639-SU | 639 nm | 1~800 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | – | <2%, <1%, <0.5% | – | <1.5 | – | – | – | <1.2, <1.1 | <1.0 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-639 | 639 nm | 800~1800 mW | TEM00 | – | – | – | <5 | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | <1.2 | – | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MRL-FN-639-H | 639 nm | 1.8~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MRL-DP-639-A | 639 nm | 3~4 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | 10-35 | PSU-DP-A | >10000 | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | Air Cooled | – | – | – | <3.0 | – | – | – | Datasheet |
| MRL-DP-639-B | 639 nm | 4~10 W | Near TEM00 (TEM00 optional) | – | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | – | – | – | – | – | <3%, <2%, <1% | – | – | – | 10-35 | WCH-580 | – | ~3.0 | – | – | – | Datasheet |
| MRL-DP-639-C | 639 nm | 10~17 W | Multi mode | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | – | 12V/ 25A | <3%, <2%, <1% | – | <5.0 | – | 10-35 | WCH-580 | – | ~3.0 | – | – | – | Datasheet |
| MRL-FN-639-SM | 639 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-D-639 | 639 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
640 NM RED Diode Laser.
6 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours±3℃) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability after warm-up (mrad) | Operating Temperature (°C) | Modulation optional | Power supply (100-240VAC) | Expected lifetime (hours) | Cooled method | Operating temperature (°C) | Cooled method (Water Cooled) | Operating temperature (℃) | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MRL-U-640-SU | 640 nm | 1~800 mW | <2%, <1%, <0.5% | TEM00 | <1.2, <1.1 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <0.05 | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | – | – | – | – | – | Datasheet |
| MRL-FN-640 | 640 nm | 800~1800 mW | – | TEM00 | <1.2 | – | <1.5 | – | <5 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | – | – | – | – | – | Datasheet |
| MRL-DP-640-A | 640 nm | 3~4 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | <3.0 | – | – | <10 | – | – | – | PSU-DP-A | >10000 | Air Cooled | 10-35 | – | – | – | Datasheet |
| MRL-DP-640-B | 640 nm | 4~10 W | <3%, <2%, <1% | Near TEM00 (TEM00 optional) | – | ~3.0 | – | – | <10 | – | – | – | PSU-W-FDA/ PSU-W-LED | >10000 | – | – | WCH-580 | 10-35 | – | Datasheet |
| MRL-DP-640-C | 640 nm | 10~17 W | <3%, <2%, <1% | Multi mode | – | ~3.0 | <5.0 | – | <10 | – | – | – | – | >10000 | – | – | WCH-580 | 10-35 | 12V/ 25A | Datasheet |
| MRL-FN-640-SM | 640 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Yellow Laser, 589 NM Yellow DPSS Lasers.
17 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Spectral line width (nm) | Transverse mode | M2 | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Fiber numerical aperture | Fiber type | Noise of amplitude (rms, 20Hz-20MHz) | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Shock tolerance (6ms) | Operating temperature (℃) | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | lifetime | instrument, etc. Operating temperature (℃) | Modulation option | Power supply (5VDC) | Storage temperature (℃) | Warranty (years) | Operating voltage(internal PCB) | Connection | Operating temperature | Storage temperature | Humidity | Dimensions of PGL-VI-589 | Dimensions of PGL-VI-1-589 | Power supply | TTL modulation | Warranty | Longitudinal mode | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | Beam diameter (mm) | Polarization ratio (dB) | Cooled method | Operating voltage (VAC) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-589 | 589 nm | 1~200 mW | <3%, <2%, <1% | <0.1, <0.003 | TEM00 | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-589 | 589 nm | 200-300 mW | <3%, <2%, <1% | – | TEM00 | – | <1.5 | – | – | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-U-589-SM | 589 nm | 1~100 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | 0.10-0.15 | SM fiber (PM fiber optional) | <1% | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-589 | 589 nm | 1~50 mW | <3%, <2%, <1%, (<0.5% optional) | – | TEM00 | <1.2 | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | – | PSU-A-D/ PSU-A-F | – | >10000 | – | – | – | – | – | – | – | 7g laterally, 15g vertically | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-U-589 | 589 nm | 1~200 mW | <3%, <2%, <1% | – | TEM00 | – | <1.0 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | PSU-SR-OEM(12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-589 | 589 nm | 1~300 mW | – | – | – | – | – | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-589 | 589 nm | 300~800 mW | – | – | – | – | – | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-589 | 589 nm | 300~500 mW | – | – | Near TEM00 | <3.0 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | >10000 | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <1.5 | Pointing Stability Over Temperature (urad/°C) / <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-V-589-Water | 589 nm | 500~1500 mW | – | – | TEM00 | <1.2 | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | >10000 | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <1 | Pointing Stability Over Temperature (urad/°C) / <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-W-589A | 589 nm | 1500~7000 mW | – | – | Near TEM00 | – | ~4.0 | – | – | – | – | – | PSU-W-LED | – | >10000 | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | <2.0 | – | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optiona | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-589-SM | 589 nm | 1~20 mW | – | – | TEM00 (single mode fiber output) | <1.1 | – | – | – | <10 | – | 10-35 | PSU-III-FDA/PSU-III-LED | – | >10000 | 0.10-0.12 | SM fiber (PM fiber optional) | – | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | PSU-A-F-OEM (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-S-589-MD | 589 nm | 1~800 mW | – | – | TEMn1 | – | – | – | – | <10 | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 0-60 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-589 | 589 nm | 1~20 mW | – | – | TEM00 | – | – | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | 1 | 3VDC | Cable with flying leads | 10°C to 35°C | -20°C to 80°C | <90%, non-condensing | Φ20×100mm2 | Φ15×65mm2 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-H1-589 | 589 nm | 1~50 mW | – | – | TEM00 | – | – | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | 15~30 | – | – | <15 | – | – | – | – | – | – | – | – | – | – | – | – | – | DC 3V PCB / DC 5V PCB | Optional, 1Hz-1KHz, 1KHz-10KHz, or higher on request | 6 months | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-VI-FC-589 | 589 nm | 1~50 mW | – | – | TEM00 | – | – | – | – | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | 1 | 3VDC | Cable with flying leads | 10°C to 35°C | -20°C to 80°C | <90%, non-condensing | Φ20×100mm2 | Φ15×65mm2 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-589 | 589 nm | 1~200 mW | – | <1MHz | TEM00 | – | – | – | – | <5 | – | 10-35 | PSU-H-FDA | – | >10000 | – | – | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Single | <8 | <±200 | – | – | – | – | – | – | – | Datasheet |
| FL-589-CW | 589 nm | 1~500 mW | – | – | – | <1.2 | – | – | – | – | – | – | – | – | >10000 | – | – | – | – | – | – | – | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | <0.5 | ~1.5 | >15 Horizontal (Vertical optional) | Air cooled | 110/220V | Second harmonic | Datasheet |
594 NM Yellow Orange Laser.
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3°C) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence (mrad) | Polarization ratio | Modulation optional | Power Stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | M2 | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-FN-594 | 594 nm | 1~50 mW | <3%, <2%, <1% | TEM00 | <1.5 | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-594 | 594 nm | 1~100 mW | – | – | – | <5 | <8 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | <1.5 | >100:1, Horizontal (Vertical optional) | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | Datasheet |
| MGL-W-594A | 594 nm | 100~800 mW | – | Near TEM00 | – | <10 | – | 10-35 | PSU-W-LED | – | >10000 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | – | <5%, <3%, (<2% optional) | <2.0 | – | – | Datasheet |
| MGL-U-594-SF | 594 nm | 800~1500 mW | – | TEM00 | – | <10 | – | – | PSU-SF | – | >10000 | – | – | – | – | – | ~3.0 | Air Cooled/ Water Cooled | Datasheet |
| PGL-H1-594 | 594 nm | 1~30 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
1073 NM Infrared Laser, Solid State Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | noise, | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Operating temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-1054~1074 | 1073 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | narrow / linewidth, / wavelength / tunable | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | – | – | – | Datasheet |
| MIL-F-1073 | 1073 nm | 1~1500 mW | – | TEM00 | – | – | <5 | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | >10000 | ~1.5 | <2.0 | >100:1, Horizontal (Vertical optional) | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Infrared Laser, 915 NM Infrared Diode Lasers, High Power Diode Laser System.
14 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (°C) | Cooled method | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-902~923 | 915 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | – | – | Datasheet |
| TEM-LN-915 | 915 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | >10000 | <1%, <0.5% | <1.1 | 25±3 | – | Datasheet |
| MLL-III-915 | 915 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | <1%, <0.5% | – | 10-35 | Conduction | Datasheet |
| MLL-H-915 | 915 nm | 1.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | <1%, <0.5% | – | 10-35 | Air cooled | Datasheet |
| MLL-F-915 | 915 nm | 5~8 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | – | >10000 | <1%, <0.5% | – | – | Air cooled | Datasheet |
| TEM-F-915 | 915 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | >10000 | – | <1.1 | 25±3 | – | Datasheet |
| MDL-XS-915 | 915 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | Datasheet |
| MDL-III-915L | 915 nm | 1~270 mW | <2%, <1%, <0.5% | – | <1.0 | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | <1.5 | 10-35 | Conduction | Datasheet |
| MDL-III-915R | 915 nm | 1~350 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | – | 10-35 | Conduction | Datasheet |
| MDL-III-915 | 915 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | – | 10-35 | Conduction | Datasheet |
| MDL-H-915 | 915 nm | 1.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | Datasheet |
| MDL-F-915 | 915 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-915 | 915 nm | 1~200 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | Datasheet |
| MDL-PS-915 | 915 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | Datasheet |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
93 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Spectral linewidth | Power stability | Optical noise | M² | Power stability (rms, 4 hours±3℃) | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence, full angle (mrad) | Polarization ratio | Pointing Stability Over Temperature(μrad/°C) | Operating Temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Longitudinal mode | Cooled method (Water cooled) | Pointing stability Over Temperature(urad/℃) | Frequency shift (MHz)(Over±2℃and 8hrs) (optional) | Power supply (100-240VAC) | Pointing stability over temperature (μrad/°C) | Warm-up time (minutes) | Cooled method (water cooled) | Operating temperature (°C) | Beam divergence (mrad) | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Power stability (rms, 4 hours , ±3°C) | Pointing stability over temperature (urad /°C) | Power supply (90-264VAC) | Power stability (rms, 4 hours ± 3°C) | Operating temperature (℃) | Single pulse energy (nJ) | Rep. rate (MHz) | Ave power stability (rms, 4 hours±3℃) | pulse | Cooled method | Frequency doubler | M2 factor | Free space output power (mW) | Fiber coupled output power (mW) | Current adjustment range | Frequency shift (MHz) (over ±2℃and 8hours ) | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Operating voltage (VAC) | Free space output power (W) | Power stability (rms, 4 hours , ±3℃) | M2 | Beam diameter (mm) | Pointing stability (urad) | Fundamental Frequency | Warm-up time of warm boot(minutes) | Warm-up time of cold boot(hours) | Frequency shift (MHz) (over ±2℃and 8 hours) | Frequency shift (MHz) (over ±2℃and 8 hours ) | Power supply (VAC) | Modulation optional | Frequency shift (MHz)(over ±2°C and 8hrs) (optional) | Frequency shift (MHz) (over ±2°C and 8 hours) | Beam diameter at the aperture (1/e2 ,mm) | Pointing stability over temperature (µrad/°C) | Storage temperature (°C) | Frequency shift over 8 hours (MHz) (optional) | Shock tolerance (6ms) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 20 | 320 nm | 1~30 mW | – | – | <1 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-320-X | 320 nm | 1~50 mW | – | – | <1 MHz | – | <0.25% | <1.2 | <1%, <0.5% | TEM00 | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | 12V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-320 | 320 nm | 50~300 mW | – | – | <5 MHz | – | <0.5% | <1.2 | <3%, <2%, <1% | TEM00 | <1.5 | – | >100:1 Vertical (Horizontal optional) | <8 | 20-30 | – | >10000 | Single | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 3 35 | 335 nm | 1~10 mW | – | – | <1 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 3 49 | 349 nm | 1~10 mW | – | – | <1 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| UV-FN-349-X | 349 nm | 1~50 mW | – | – | <1 MHz | – | <0.25% | <1.2 | <1%, <0.5% | TEM00 | ~0.7 | <1.0 | >100:1, Vertical (Horizontal optional) | <8 | 10-35 | 12V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| UV-FN-349-SLM | 349 nm | 50~100 mW | – | – | <1 MHz | – | <0.25% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-349 | 349 nm | 100~400 mW | – | – | <5 MHz | – | <0.5% | <1.2 | <3%, <2%, <1% | TEM00 | <1.5 | – | >100:1 Vertical (Horizontal optional) | <8 | 20-30 | – | >10000 | Single | WCH-580 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 3 55 | 355 nm | 1~10 mW | – | – | <1 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-355 | 355 nm | 10~100 mW | – | – | <5 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 360 | 360 nm | 1~50 mW | – | – | <1 MHz | – | <0.25% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-360 | 360 nm | 1~80 mW | – | – | <1 MHz | – | <0.5% | <1.5 | – | TEM00 | <1.0 | <1.2 | >100:1, Vertical (Horizontal optional) | – | 10-35 | – | >10000 | Single | – | <8 | <±200 | PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-360 | 360 nm | 80~300 mW | – | – | <5 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 369 | 369 nm | 1~80 mW | – | – | <10 MHz | – | <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 457 | 457 nm | 1~350 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-457 | 457 nm | 350~3500 mW | – | – | <5 MHz | – | <0.5% | <1.2 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | PSU-W-FDA | <8 | <15 | WCH-580 | 20-30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 473 | 473 nm | 1~30 mW | – | – | <1 MHz | – | <0.2% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U-473 | 473 nm | 1~100 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | TEM00 | <1.0 | – | >100:1, Vertical (Horizontal optional) | – | – | PSU-SR-OEM | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | <1.5 | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-473 | 473 nm | 100~300 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | TEM00 | <2.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | – | – | <±200 | <3%, <2% | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 515 | 515 nm | 1~50 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 522 | 522 nm | 1~150 mW | – | – | <1 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R- 522 | 522 nm | 150~500 mW | – | – | <5 MHz | – | <0.5% | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 523.5 | 523.5 nm | 1~150 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 526.5 | 526.5 nm | 1~150 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-S-532-Brillouin | 532 nm | 1~150 mW | – | – | <1 MHz | – | <0.1% RIN(DC-20 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-S-532 | 532 nm | 1~150 mW | – | – | <1 MHz | – | <0.2% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-S-532-D | 532 nm | 1~150 mW | – | – | <1 MHz | – | <0.2% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U- 532 | 532 nm | 1~1000 mW | – | – | <1 MHz | – | <0.25% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-532 | 532 nm | 1~15 W | – | – | <5 MHz | – | <0.1% optional | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 5 43 | 543 nm | 1~200 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-556 | 556 nm | 1~150 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | – | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 561 | 561 nm | 1~100 mW | – | – | <1 MHz | – | <0.25% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-561 | 561 nm | 1~150 mW | – | – | <1 MHz | – | <0.5% | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | – | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 577 | 577 nm | 1~300 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 588 | 588 nm | 1~200 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-W-588 | 588 nm | 200~500 mW | – | – | <0.00001 nm | – | <0.5% | <1.5 | – | TEM00 | <3.0 | – | >100:1, Horizontal (Vertical optional) | – | – | – | >10000 | Single | WCH-580 | – | – | – | – | <20 | – | 20-30 | – | <8 | – | <3%, <2% | – | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 589 | 589 nm | 1~200 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-W-589 | 589 nm | 200~500 mW | – | – | <0.00001 nm | – | <0.5% | <1.5 | – | TEM00 | <3.0 | – | >100:1, Horizontal (Vertical optional) | – | – | – | >10000 | Single | WCH-580 | – | – | – | – | <20 | – | 20-30 | – | <8 | – | <3%, <2% | – | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 607 | 607 nm | 1~200 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-607 | 607 nm | 200~1000 mW | – | – | <5 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 6 33 | 633 nm | 1~30 mW | – | – | <100 MHz | – | <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 660 | 660 nm | 1~100 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-III-660L | 660 nm | 1~40 mW | – | – | <50 MHz optional | – | <0.5% | <1.5 | – | – | – | <1.2 | – | – | – | – | >10000 | – | – | – | – | PSU-III-FDA | – | <5 | – | – | – | – | – | – | – | – | <2%, <1%, <0.5% | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 671 | 671 nm | 1~50 mW | – | – | <1 MHz | – | <0.2% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-671 | 671 nm | 1~500 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | <10 | – | 10-35 | – | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-W-671 | 671 nm | 500~2500 mW | – | – | <0.00001 nm | – | <0.5% | <1.5 | – | TEM00 | <3.0 | – | >100:1, Horizontal (Vertical optional) | – | – | – | >10000 | Single | WCH-580 | – | – | – | – | <20 | – | 20-30 | – | <8 | – | <3%, <2% | – | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 721 | 721 nm | 1~300 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-721 | 721 nm | 300~1000 mW | – | – | <5 MHz | – | <0.5% | <1.3 | – | TEM00 | ~1.5 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | – | <8 | – | WCH-580 | 20-30 | – | – | – | <3%, <2%, <1% | – | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 914 | 914 nm | 1~100 mW | – | – | <1 MHz | – | <1% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 946 | 946 nm | 1~200 mW | – | – | <1 MHz | – | <2% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 1047 | 1047 nm | 1~500 mW | – | – | <1 MHz | – | <1% | <1.2 | – | TEM00 | – | – | >100:1 Vertical | – | – | – | >10000 | – | – | – | – | 12V/6.67A | – | <10 | – | – | – | – | – | – | – | – | – | 10-35 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | Air cooled | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1053 | 1053 nm | 1~120 mW | – | – | <50 MHz optional | – | <0.5% | <1.5 | – | TEM00 | – | – | >100:1 Vertical | – | – | – | >10000 | – | – | – | – | 12V/6.67A | – | <10 | – | – | – | – | – | – | – | – | – | 10-35 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | Air cooled | LASER HEAD (780) / POWER SUPPLY | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-U-1053-SU | 1053 nm | 1~200 mW | – | – | <1 MHz | – | <2% | <1.2 | – | TEM00 | <1.0 | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-SR-OEM (12V/25A) | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | <1.5 | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1064 | 1064 nm | 1~120 mW | – | – | <50 MHz optional | – | <0.5% | <1.5 | – | TEM00 | – | – | >100:1 Vertical | – | – | – | >10000 | – | – | – | – | 12V/6.67A | – | <10 | – | – | – | – | – | – | – | – | – | 10-35 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | Air cooled | LASER HEAD (780) / POWER SUPPLY | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-S-1064-D | 1064 nm | 1~300 mW | – | – | <1 MHz | – | <0.2% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-S-1064 | 1064 nm | 1~700 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U-1064-SU | 1064 nm | 700~1000 mW | – | – | <1 MHz | – | <1% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-1064 | 1064 nm | 1~10 W | – | – | <5 MHz | – | <0.5% | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 1 122 | 1122 nm | 1~250 mW | – | – | <1 MHz | – | <1% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 1313 | 1313 nm | 1~500 mW | – | – | <1 MHz | – | <1% | <1.2 | – | TEM00 | – | – | >100:1 Vertical | – | – | – | >10000 | – | – | – | – | 12V/6.67A | – | <10 | – | – | – | – | – | – | – | – | – | 10-35 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | Air cooled | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1319 | 1319 nm | 1~100 mW | – | – | <1 MHz | – | <1% | <1.2 | – | TEM00 | – | – | >100:1 Vertical | – | – | – | >10000 | – | – | – | – | 12V/6.67A | – | <10 | – | – | – | – | – | – | – | – | – | 10-35 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | Air cooled | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1342 | 1342 nm | 1~500 mW | – | – | <1 MHz | – | <1% | <1.2 | – | TEM00 | – | – | >100:1 Vertical | – | – | – | >10000 | – | – | – | – | 12V/6.67A | – | <10 | – | – | – | – | – | – | – | – | – | 10-35 | 0.1-0.6 | 80±2 | <2%, <1% | duration, / high | Air cooled | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-R-1342 | 1342 nm | 500 mW~5 W | – | – | <5 MHz | – | <0.5% | <1.3 | – | TEM00 | ~1.5 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | – | <8 | – | WCH-580 | 20-30 | – | – | – | <3%, <2%, <1% | – | PSU-W-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-515-SLM | 515 nm | 1~2000 mW | – | – | <20 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Air cooled or Water cooled | – | – | 1-2000 | 1-500 | 1-100% | <±200 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 525 | 525 nm | 1~2000 mW | – | – | <20 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-532-SLM | 532 nm | 1~3000 mW | – | – | <20 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Water cooled | – | – | – | – | 1-100% | – | – | – | – | >20 Horizontal (Vertical optional) | 110/220V | 3-10 / 10-15 | <2%, <1%, <0.5% | <1.1 / <1.2 | ~0.8 | <15 / <50 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-532-SLM-H | 532 nm | 3-15 W | – | – | <50 kHz | – | <0.1% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Water cooled | – | – | – | – | 1-100% | – | – | – | – | >20 Horizontal (Vertical optional) | 110/220V | 3-10 / 10-15 | <2%, <1%, <0.5% | <1.1 / <1.2 | ~0.8 | <15 / <50 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-532-SLM-E | 532 nm | 20-40 W | – | – | <50 kHz | – | <0.1% RIN(DC-3 MHz) | <1.2 | – | TEM00 | – | <1 | Vertical, >100:1 | – | – | – | >10000 | SLM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Water cooled | – | – | – | – | – | – | – | – | – | – | 110/220VAC | – | <2%, <1%, <0.5% | – | ~1.6 | <15 / <50 | – | <30 | <2 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 560 | 560 nm | 1~100 mW | – | – | <20 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-633-SLM | 633 nm | 1~1500 mW | – | – | <20 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Air cooled or Water cooled | – | – | 1mW-1.5W | 1-500 | 1-100% | – | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | 110/220V | – | <2%, <1% | – | – | – | – | – | – | <±200 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1053-SLM | 1053 nm | 1~10 W | – | – | <10 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Air cooled or Water cooled | – | – | – | – | 1-100% | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | – | – | – | – | – | <±200 | 110/220VAC | – | – | – | – | – | – | – | – | Datasheet |
| FL-1064-SLM | 1064 nm | 1-10 W | – | – | <5 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Air cooled or Water cooled | – | – | – | – | 1-100% | – | Collimator | 1 | Metal | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | <5 / <10 | – | – | – | – | – | 110/220VAC | – | – | – | – | – | – | – | – | Datasheet |
| FL-1064-SLM-H | 1064 nm | 10-70 W | – | – | <10 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | TEM00 | – | – | – | – | – | – | >10000 | SLM | – | – | – | – | – | <30 | – | – | – | – | – | – | – | – | – | 15-30 | – | – | – | – | Air cooled or Water cooled | – | – | – | – | 1-100% | – | Collimator | 1 | Metal | >15, after PM fiber | – | – | <2%, <1%, <0.5% | – | 4±1 (Collimator output) | <5 / <10 | – | – | – | – | – | 110/220VAC | – | – | – | – | – | – | – | – | Datasheet |
| 1550 | 1550 nm | 1~10 W | – | – | <5 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-AO-532 | 532 nm | – | – | – | – | – | Q-switched | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-AO-1064 | 1064 nm | – | 1~200 uJ | 1 Hz~1 kHz | <10 MHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 532 | 532 nm | 1~150 mW | – | – | <1 MHz | – | <0.2% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U-532-Raman | 532 nm | 1~500 mW | – | – | <1 MHz | – | <0.2% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-473-AOM | 473 nm | 1~200 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | TEM00 | – | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA-AOM | – | <5 | – | 10-35 | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1MHz;TTL or Analog optional | – | – | – | – | – | – | – | Datasheet |
| MSL-III-532-AOM | 532 nm | 1~30 mW | – | – | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-532-AOM | 532 nm | 30~800 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 556 | 556 nm | 1~80 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-561-AOM | 561 nm | 1~100 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.1 | – | TEM00 | – | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA-AOM | – | <5 | – | 10-35 | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <1.2 | – | – | – | – | – | – | – | – | DC-1MHz;TTL or Analog optional | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-671-AOM | 671 nm | 1~400 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | TEM00 | – | <1.5 | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA-AOM | – | <5 | – | 10-35 | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1MHz;TTL or Analog optional | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-457 | 457 nm | 1~350 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | TEM00 | <2.0 | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | – | – | <±200 | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-FN-523.5 | 523.5 nm | 1~150 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | TEM00 | – | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | – | – | 10-35 | – | – | – | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <±200 | – | – | – | – | – | – | Datasheet |
| MSL-FN-526.5 | 526.5 nm | 1~150 mW | – | – | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | TEM00 | – | – | >100:1, Vertical (Horizontal optional) | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | – | – | 10-35 | – | – | – | – | <8 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <±200 | – | – | – | – | – | – | Datasheet |
| MSL-FN-660 | 660 nm | 1~100 mW | – | – | <1 MHz | <3%, <2%, <1%, <0.5% | <0.5% | <1.2 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | PSU-H-FDA | – | <10 | – | 10-35 | – | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-III-1053L | 1053 nm | 1~120 mW | – | – | <50 MHz optional | <2%, <1%, <0.5% | <0.5% | <1.5 | – | – | – | ~2.0 | – | – | – | – | >10000 | – | – | – | – | PSU-III-FDA | – | <5 | – | – | – | – | – | – | – | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-S-532-Raman | 532 nm | 1~150 mW | – | – | <1 MHz | <0.5% | <0.2% | <1.1 | – | TEM00 | – | <1.2 | >100:1, Horizontal (Vertical optional) | – | – | 12V/3A | >10000 | Single | – | – | – | – | – | <5 | – | 15-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <±200 (<0.07cm-1) | <1.0 | <8 | -10-50 | – | – | Datasheet |
| MSL-S-561-D | 561 nm | 1~100 mW | – | – | <1 MHz | <1% | <0.25% | <1.2 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | – | – | <5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <±200 | 7g laterally,15g vertically | Datasheet |
| MSL-S-671-D | 671 nm | 1~50 mW | – | – | <1 MHz | <1% | <0.2% | <1.2 | – | TEM00 | – | – | – | – | – | – | >10000 | Single | – | – | – | – | – | <5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <±200 | 7g laterally,15g vertically | Datasheet |
| MSL-U-946-SU | 946 nm | 1~200 mW | – | – | <1 MHz | <3%, <2%, <1% | <2% | <1.5 | – | TEM00 | <1.0 | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-SR-OEM (12V/25A) | >10000 | Single | – | – | – | PSU-H-FDA | – | <5 | – | 10-35 | – | <8 | <±200 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
525 NM Green Laser.
2 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-525-SLM | 525 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | Datasheet |
| FL-525-LN-L | 525 nm | 1~2000 mW | 1-2000 | 1-500 | TEM00 | SLM | 1-100% | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <2%, <1% | <0.002 | Datasheet |
1070 NM Infrared Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Line width(nm) | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization state | Warm-up time (minutes) | Operating temperature (℃) | Cooled method | Power supply (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1070-CW | 1070 nm | 1~100 W | <2nm | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | <15 | 15-35 | Air cooled | 110/220VAC | >10000 | Datasheet |
1090 NM Infrared Laser, Solid State Laser, DPSS Laser |
1 model| Model | Wavelength | Output / average power | Line width(nm) | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization state | Warm-up time (minutes) | Operating temperature (℃) | Cooled method | Power supply (VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1090-CW | 1090 nm | 1~20 W | <2nm | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random | <15 | 15-35 | Air cooled | 110/220VAC | >10000 | Datasheet |
1560nm DFB Laser, Infrared Laser, DPSS Laser |
6 models| Model | Wavelength | Output / average power | Single pulse energy (nJ) | Rep. rate (MHz) | Pulse duration (fs) | Warm-up time (minutes) | Transverse mode | M2 factor | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-1560-SM | 1560 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | |
| TEM-F-1560DFB | 1560 nm | 1~20 mW | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1560-SM | 1560 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-1560DFB-SM | 1560 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – | |
| FS-H-1560A | 1560 nm | 1~200 mW | 1-2.5 | 80±2 | <50 | <10 | TEM00 | <1.2 | >100:1 after PM fiber | Air cooled | 10-35 | 12V/6.67A | >10000 | Datasheet |
| FC-OEM-1560 | 1560 nm | 1~15 mW | – | – | – | – | – | – | – | – | – | – | – |
618 NM RED Laser, DPSS Laser, RED Laser |
3 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Spectral linewidth (nm) | Relative intensity noise (rms,10Hz-3MHz) | Frequency shift (MHz)(over ±2℃and 8hours ) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Power supply (100-240VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-618-SLM | 618 nm | 1-50 mW | 1-50 | 1-25 | <2%, <1% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | – | – | – | – | Datasheet |
| FL-618-LN-L | 618 nm | 1~50 mW | 1-50 | 1-25 | <2%, <1% | TEM00 | SLM | 1-100% | – | – | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <0.002 | <0.1%, <0.05% | <±200 | – | – | – | Datasheet |
| MRL-U-618-SF | 618 nm | 1~50 mW | – | – | – | TEM00 | – | – | – | – | – | – | – | – | – | <10 | Air Cooled/ Water Cooled | – | – | >10000 | – | – | – | ~3.0 | >100:1 | PSU-SF | Datasheet |
620 NM RED Diode Laser.
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | M2 | Beam diameter (mm) | Polarization ratio (dB) | Cooled method | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Fundamental Frequency | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-620-CW | 620 nm | 1~500 mW | <2%, <1%, <0.5% | <0.5 | <1.2 | ~2 | >15 Horizontal (Vertical optional) | Air cooled | <15 | 15-35 | 110/220VAC | >10000 | Second harmonic | – | – | – | – | – | – | Datasheet |
| PS-L-620 | 620 nm | 1~100 mW | – | – | – | – | – | – | <10 | – | – | – | – | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~100 | 3 | <5%, <3% | 20~30 | Datasheet |
| PS-M-620 | 620 nm | 1~500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
560nm Q Switched Yellow Green Laser.
4 models| Model | Wavelength | Output / average power | Free space output power (mW) | Fiber coupled output power (mW) | Transverse mode | Longitudinal mode | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-560-SLM | 560 nm | 1-100 mW | 1-100 | 1-50 | TEM00 | SLM | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| FL-560-LN-L | 560 nm | 1~100 mW | 1-100 | 1-50 | TEM00 | SLM | <0.1%, <0.05% | <±200 | <1.1 | FC/APC | 1 | PVC, Metal optional | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | <2%, <1% | <0.002 | – | – | – | – | – | – | Datasheet |
| PS-L-560 | 560 nm | 1~100 mW | – | – | – | – | – | – | – | – | – | – | – | <10 | – | – | – | – | – | – | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~100 | 3 | <5%, <3% | 20~30 | Datasheet |
| PS-M-560 | 560 nm | 1~800 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
1040 NM Infrared Solid State Laser
5 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | Relative intensity noise (rms, 10Hz-3MHz) | Frequency shift (MHz) (over ±2℃and 8 hours ) | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Spectral line width (nm) | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence (mrad) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Spectral linewidth (nm) | Frequency shift (MHz) (over ±2℃and 8 hours) | Beam diameter at the aperture (1/e2, mm) | Polarization ratio | Line width(nm) | Fiber length (m) | Polarization state | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1040-SLM | 1040 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.3%, <0.1%, (<0.05% optional) | <±200 | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-1040 | 1040 nm | 1~100 mW | – | TEM00 | – | – | – | – | <1.5 | – | – | – | – | – | <5 | – | – | – | >10000 | <0.1 | <1% | <2.0 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | Datasheet |
| FL-1040-LN-L | 1040 nm | 1~10 W | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <0.1%, <0.05% | – | <1.1 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | <0.004 | <±200 | – | – | – | – | – | Datasheet |
| MIL-H-1040 | 1040 nm | 1~100 mW | – | TEM00 | – | – | – | – | <1.5 | – | – | – | – | – | <5 | – | – | – | >10000 | – | – | <2.0 | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | ~1.2 | >100:1, Horizontal (Vertical optional) | – | – | – | Datasheet |
| FL-1040-CW | 1040 nm | 1~100 W | – | – | – | – | – | – | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <15 | Air cooled | 15-35 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | – | – | <2nm | 1 | Random | Datasheet |
Femtosecond Laser |
15 models| Model | Wavelength | Output / average power | Repetition rate | Single pulse energy (nJ) | Fiber | pulse | Warm-up time (minutes) | Transverse mode | M2 factor | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Pulse duration (fs) | Ave power stability (rms, 4 hours±3℃) | Polarization ratio | Single pulse energy (uJ) | pulse duration, | M2 | All Fiber Femtosecond pulsed laser at 1064nm | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FS-H- 515A | 515 nm | 1-100 mW | 80±1 MHz | 1-1.25 | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | <10 | TEM00 | <1.2 | Air cooled | 10-35 | 12V/6.67A | >10000 | – | – | – | – | – | – | – | Datasheet |
| FS-H- 515B | 515 nm | 100-1000 mW | 80±1 MHz | – | – | – | <10 | TEM00 | <1.2 | Air cooled | 10-35 | RAD1PS | >10000 | <150 | <2%, <1% | >100:1 Horizontal | – | – | – | – | Datasheet |
| FS-H- 515C | 515 nm | 1-10 W | 80±1 MHz | – | Femtosecond / pulsed / laser / at | – | <10 | TEM00 | <1.2 | Water cooled | 10-35 | RAD1PS | >10000 | <250 | <2%, <1% | >100:1 Horizontal | – | – | – | – | Datasheet |
| FS-H- 515D | 515 nm | 10-30 W | 80±1 MHz | – | Femtosecond / pulsed / laser / at | – | <10 | TEM00 | <1.2 | Water cooled | 10-35 | RAD1PS | >10000 | <250 | <2%, <1% | >100:1 Horizontal | – | – | – | – | Datasheet |
| FS-H- 515E | 515 nm | 30-60 W | 80±1 MHz | – | Femtosecond / pulsed / laser / at | – | <10 | TEM00 | <1.3 | Water cooled | 10-35 | RAD1PS | >10000 | <250 | <2%, <1% | >100:1 Horizontal | – | – | – | – | Datasheet |
| FS-F- 515A | 515 nm | 1-2 W | 1 MHz | – | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | <10 | TEM00 | <1.3 | Water cooled | 10-35 | RAD1PS | >10000 | – | – | – | 1-2 | – | – | – | Datasheet |
| FS-F- 515B | 515 nm | 2-8 W | 100 kHz-1 MHz | – | Femtosecond / pulsed / laser / at | – | <10 | TEM00 | <1.2 | Water cooled | 10-35 | RAD1PS | >10000 | <300 | <2%, <1% | >100:1 Horizontal | – | – | – | – | Datasheet |
| FS-F- 515C | 515 nm | 8-20 W | 100 kHz-1 MHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FS-F- 515D | 515 nm | 20-40 W | 100 kHz-1 MHz | – | Femtosecond / pulsed / laser / at | – | <10 | TEM00 | <1.3 | Water cooled | 10-35 | RAD1PS | >10000 | <300 | <2%, <1% | >100:1 Horizontal | – | – | – | – | Datasheet |
| FS-G- 515A | 515 nm | 1-20 W | 50 kHz-1 MHz | – | – | – | <10 | TEM00 | – | Water cooled | 15-35 | RAD1PS | >10000 | <500 | <2%, <1% | >100:1 Horizontal | – | high repetition | <1.3 | – | Datasheet |
| FS-H- 5 32A | 532 nm | 1-100 mW | 80±1 MHz | 1-1.25 | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | <10 | TEM00 | – | Air cooled | 10-35 | 12V/6.67A | >10000 | – | – | >100:1 Horizontal | – | – | <1.2 | – | Datasheet |
| FS-H- 5 32B | 532 nm | 100-2000 mW | 80±1 MHz | – | – | – | <10 | TEM00 | – | Air cooled | 10-35 | RAD1PS | >10000 | <150 | <2%, <1% | >100:1 Horizontal | – | – | <1.2 | – | Datasheet |
| FS-H- 10 64A | 1064 nm | 1-500 mW | 80±2 MHz | 1-6.25 | – | duration, / high | <10 | TEM00 | <1.2 | Air cooled | 10-35 | 12V/6.67A | >10000 | – | <2%, <1% | >100:1 Vertical | – | – | – | Pulse duration (fs) / <150 | Datasheet |
| FS-H- 10 64B | 1064 nm | 500-5000 mW | 80±2 MHz | 6.25-62.5 | – | duration, / high | <10 | TEM00 | <1.2 | Air cooled | 10-35 | RAD1PS | >10000 | – | <2%, <1% | >100:1 Vertical | – | – | – | – | Datasheet |
| FS-H- 1560A | 1560 nm | 1-200 mW | 80±2 MHz | 1-2.5 | – | – | <10 | TEM00 | <1.2 | Air cooled | 10-35 | 12V/6.67A | >10000 | <50 | – | >100:1 after PM fiber | – | – | – | – | Datasheet |
Infrared Laser AT 2120 NM
2 models| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Rep.rate (kHz) | Single pulse energy (µJ) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply | Expected lifetime (hours) | Power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OEM-AO-2120 | 2120 nm | 1~3 W | <5%, <3% | 10 | 100-300 | <3 | Water cooled | 10-30 | PSU-MIR (3U) | >10000 | – | – | Datasheet |
| OEM-IR-2120 | 2120 nm | 1~10 W | – | – | – | <3 | Water cooled | 10-30 | PSU-MIR (3U) | >10000 | <5%, <3% | <10 | Datasheet |
1202 NM Q Switched Infrared Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability rms, 4 hours±3℃) | Rep. rate | Pulse duration (ns) | Single pulse energy (µJ) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-K-1202 | 1202 nm | 10~700 mW | <5%, <3% | 10kHz | <25 | 70 | <2 | <10 | 10-35 | PSU-AOM (3U) | >10000 | Datasheet |
1535nm Infrared Laser, DPSS Laser |
3 models| Model | Wavelength | Output / average power | Rep. rate (Hz) | Energy stability (rms, 4 hours , ±3°C) | Beam diameter at the aperture (mm) | Beam divergence, full angle (mrad) | Operating temperature (℃) | Operating voltage (V) | Single pulse energy (µJ) | Pulse duration (ns) | Transverse mode | Power supply (100-240VAC) | Power supply (5VDC) | Expected lifetime (hours) | Single pulse energy (uJ) | High energy diode pumped all solid state | Rep. rate | M2 | Beam diameter (mm) | Warm-up time (seconds) | Cooled method | Expected lifetime (pulses) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MPL-E-1535 | 1535 nm | 0.1~1 mW | 1-10 | <5% | ≤12 | 3.85 | -40-65 | <2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-1535 | 1535 nm | 0.1~1 mW | 1-10 / 1000 | <5% | – | ≤12 / ≤15 | 10-35 | – | 100 / 200 / 300 / 400 / 40 | 3-6 / 3-5 | TEM00 | PSU-SR | PSU-T-OEM-II (5V/5A) | >107 times irradiate / >2×107 times irradiate / >107 times irradiate | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1535-P | 1535 nm | 4 mW | – | – | – | ≤15 | -20~60 | – | – | – | – | – | PSU-DPS-P | – | 400 / 500 / 40 | Pulse duration (ns) / 3-6 | 1-10Hz (optional) / 1000Hz | ≤1.3 / ≤1.5 | ~1 | <10 | Conduction | >107 | Datasheet |
3440 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-PS-3440 | 3440 nm | 1~1000 mW | <3%, <2%, <1% | <10 | Waterr cooled | 15-30 | RAD1PS | >10000 | Datasheet |
3640 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-PS-3640 | 3640 nm | 1~1000 mW | <3%, <2%, <1% | <10 | Waterr cooled | 15-30 | RAD1PS | >10000 | Datasheet |
3967 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-PS-3967 | 3967 nm | 1~600 mW | <3%, <2%, <1% | <10 | Waterr cooled | 15-30 | RAD1PS | >10000 | Datasheet |
4235 NM MID Infrared Laser, Solid State Laser, IR Laser |
1 model| Model | Wavelength | Output / average power | Ave power stability (rms, 4 hours±3℃) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|
| MIL-PS-4235 | 4235 nm | 1~60 mW | <3%, <2%, <1% | <10 | Waterr cooled | 15-30 | RAD1PS | >10000 | Datasheet |
4.5 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| HPL-MIR-4500 | 4500 nm | 1~2 W | Datasheet |
4.8 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Power supply (90-264VAC) | |
|---|---|---|---|---|---|
| HPL-MIR-4800 | 4800 nm | 1~2000 mW | <3%, <5% | PSU-MIR (3U) | Datasheet |
295nm Q Switched UV Laser.
3 models| Model | Wavelength | Output / average power | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Warm-up time (minutes) | Operating temperature (°C) | Rep. rate (kHz) | Power stability (rms, over 4 hours) | Beam diameter at the aperture (1/e2,mm) | Cooled method | Operating temperature (℃) | Power supply (220/110VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PS-L-295 | 295 nm | 1~10 mW | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~10 | 3 | <5%, <3% | <10 | 20~30 | – | – | – | – | – | – | Datasheet |
| PS-M-295 | 295 nm | 1~50 mW | – | – | – | – | – | – | – | 500-1000 | <3%, (<2% optional) | ~3.0 | Water cooled | 15~35 | On request | Datasheet |
| AO-K-295/20uJ | 295 nm | 100 mW | – | – | – | – | – | – | – | – | – | – | – | – | – |
310nm Q Switched UV Laser.
2 models| Model | Wavelength | Output / average power | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Warm-up time (minutes) | Operating temperature (°C) | Rep. rate (kHz) | Power stability (rms, over 4 hours) | Beam diameter at the aperture (1/e2,mm) | Cooled method | Operating temperature (℃) | Power supply (220/110VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PS-L-310 | 310 nm | 1~10 mW | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~10 | 3 | <5%, <3% | <10 | 20~30 | – | – | – | – | – | – | Datasheet |
| PS-M-310 | 310 nm | 1~40 mW | – | – | – | – | – | – | – | 500-1000 | <3%, (<2% optional) | ~3.0 | Water cooled | 15~35 | On request | Datasheet |
590nm Q Switched Yellow Green Laser.
2 models| Model | Wavelength | Output / average power | All picosecond pulsed laser | Pulse duration(ps) | Max average power (mW) | Rep. rate (kHz)(optional) | Ave power stability (over 4 hours) | Warm-up time (minutes) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|
| PS-L-590 | 590 nm | 1~100 mW | is made features of short pulse duration, high repetition rate and good beam | <500 | 1~100 | 3 | <5%, <3% | <10 | 20~30 | Datasheet |
| PS-M-590 | 590 nm | 1~600 mW | – | – | – | – | – | – | – | Datasheet |
488 NM Blue Diode Laser.
2 models| Model | Wavelength | Output / average power | Power stability | Rep.rate (kHz) | Single pulse energy (µJ) | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Cooled method | Power supply (90-264VAC) | Expected lifetime (hours) | Warranty period | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPSS Laser | 488 nm | 1-300 mW | – | – | – | – | – | – | – | – | – | – | |
| AO-DF-488 | 488 nm | 1-300 mW | <5%, <3% | 3-10 | 1-75 | <5 | >100:1 | <10 | Water Cooled | PSU-AOM(3U) | 10000 | 1 year | Datasheet |
High Energy Laser |
78 models| Model | Wavelength | Pulse energy | Repetition rate | Pulse width | Power stability | High energy diode pumped all solid state | Beam diameter (mm) | Beam divergence, full angle (mrad) | Cooled method | Warm-up time (minutes) | Operating voltage (VDC) | Operating temperature (℃) | Expected lifetime (hours) | Pulse duration (ns) | Jitter (ns, sdev) | energy | Expected lifetime (pulses) | Transverse mode | M2 | Power supply (110/220VAC) | Power stability (rms, 4 hours , ±3℃) | of high single pulse energy ，short pulse | Pointing stability over temperature (urad/℃) | Polarization | Relative humidity | Power supply (24VDC) | pulse | Power supply | Expected lifetime(hours) | features of high single pulse energy, short | Average power (W) | Fiber core diameter | Fiber connector | Fiber length(m) | Fiber Jacket | Energy stability (std dev/mean) | Power supply (VDC) | high single pulse energy, high repetition rate, | Power stability (rms, 4 hours±3℃) | Power supply (220VAC) | Expected lifetime of lamp (pulses) | Pulse duration (ms) | Average power | Ave power stability (rms, 4 hours±3℃) | Polarization ratio | Power supply (100-240VAC) | Average power (mW) 1 | M2 factor | Frequency doubler | Pointing stability (urad, std) | Fiber jacket | Expected lifetime (pluses) | Pointing stability over temperature (urad/°C) | Jitter (ns, Sdev) | Warranty period | Energy stability | Power supply(110/220VAC) | Expected lifetime( pulses) | Energy stability (rms, 4 hours , ±3℃) | Beam diameter(mm) | Operating temperature(℃) | Power stability (rms) | high single pulse energy，high output power， | Pointing stability over temperature(urad/°C) | Delay between two pulses (us) | Delay between two pulses (ns) | High energy diode pumped all solid | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 420 ~ 1200 | 420~1200 nm | 1-20 mJ | 10 Hz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 2 13 | 213 nm | 1-100 uJ | 100 Hz-10 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 266 | 266 nm | 1-100 uJ | 1 kHz-5 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| EO-266-Subnano-Hi | 266 nm | 1-500 uJ | 100 Hz-10 kHz | <1.5 ns @<5 kHz | – | Power stability (rms, 4 hours ±3℃) / <5% | ~1.5mm | ≤3mrad | Air cooled or water cooled | <15 | 24V/21A | 15-30 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-266- Neoma | 266 nm | 1-100 mJ | <12 Hz | – | – | – | ~3.5×3.5 | ≤7 | Air cooled | <15 | 48V/7.3A | 15-35 | – | <12 | <1ns (Int.) | diode / pumped / all / solid / state | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 2 80 | 280 nm | 1-500 uJ | 1-100 Hz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| 355 | 355 nm | 30 uJ | 0-1000 kHz | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| EO-355-P-Subnano | 355 nm | 1-130 uJ | 0.5-2 kHz | <1 ns | – | – | – | <3 | Air cooled | – | – | 15-30 | – | – | – | diode / pumped / all / solid | – | TEM00 | ≤1.5 | PSU-EO-P-Subnano | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-355-Subnano-Hi | 355 nm | 1-600 uJ | 100 Hz-10 kHz | <1.5 ns @<5 kHz | – | – | ~1.5mm | ≤3mrad | Air cooled or water cooled | <15 | 24V/21A | 15-30 | >10000 | – | – | diode / pumped / all / solid | – | – | – | – | <5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-355- Neoma | 355 nm | 1-100 mJ | <12 Hz | – | – | – | ~3.5×3.5 | ≤7 | Air cooled | <15 | 48V/7.3A | 15-35 | – | <12 | <1ns (Int.) | diode / pumped / all / solid / state | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-355-Q Small size | 355 nm | 1-10 mJ | <10 Hz | – | – | – | ~9 | – | Water cooled | <15 | – | 15-35 | – | <10 | <1ns (Int.) | lamp / pumped / solid / state | 107-108 | – | – | PSU-LPS-Q(3U) | – | Beam divergence, full angle (mrad) / <3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 527 | 527 nm | 1-20 mJ | 0.2-10 kHz fixed | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| EO-532-PS | 532 nm | 1-60 uJ | 1-1000 kHz | <15 ps | – | – | 1.5±0.5 | ≤2 | Water cooled | <15 | – | 15-30 | >10000 | – | – | – | – | – | ≤1.4 | PSU-EO-PS | <5%, <3% | – | <50 | 100:1 | <60% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-H M²<1.5 | 532 nm | 400-800 uJ | 1-10 kHz | <6 ns @5 kHz | – | – | ~1 | <3 | Conduction (EO-532-H-I) / Air cooled (EO-532-H-II) | <15 | – | -20-55 | >10000 | – | – | – | – | – | <1.5 / <2 | – | <2%, <1% | – | <20 | – | – | PSU-EO-H (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532- N | 532 nm | 100-800 uJ | 1 Hz-25 kHz | <6 ns @<5 kHz | – | – | ~1 | <3 | Air cooled or water cooled | <15 | – | 15-30 | >10000 | – | – | – | – | – | <1.5 / <2 | – | <2%, <1% | – | <20 | – | – | PSU-EO-N (24V/13A) | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532- G M²<1.2 | 532 nm | 10-1500 uJ | 1-100 kHz | <8 ns @5 kHz | – | – | ~1 / ~1 | <3 / <3 | Air cooled (EO-532-G-I)or Water cooled (EO-532-G-III)5 / Air cooled (EO-532-G-II) | <15 / <15 | – | 15-30 / 15-30 | >10000 | – | – | – | – | – | – | – | <2%, <1% / <2%, <1% | – | <20 / <20 | – | – | PSU-EO-G (24V/13A) / PSU-EO-G (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-P-Subnano | 532 nm | 1-500 uJ | 0.5-2 kHz | <1 ns | – | – | – | <3 | Air cooled / Water cooled | <15 | – | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-P-Subnano (110/220VAC) / 24V/21A | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-Subnano | 532 nm | 1-500 uJ | 1-10 kHz | <1.5 ns @1 kHz | – | – | – | <3mrad | Air cooled | <15 | – | 15-30 | >10000h | – | – | – | – | – | – | PSU-EO-Subnano | – | – | – | – | – | – | – | – | – | Rep. rate / 1-10kHz (adjustable) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-Subnano-Hi | 532 nm | 1-2 mJ | 100 Hz-10 kHz | <1.5 ns @< 5 kHz | – | – | ~1.2mm / ~1.5mm | <3mrad | Air cooled or water cooled | <15 | 24V/21A | 15-30 | >10000 | – | – | diode / pumped / all / solid | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 50mW-5W / 5-10W | 1mm, 0.22NA | SMA905 | 1 | Metal | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-D | 532 nm | 1-2 mJ | 1-5 kHz | <10 ns @5 kHz | – | – | ~1 | <3 | Water cooled | – | – | 15-30 | >10000 | – | – | – | – | – | <1.5 | PSU-EO-D | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-E Narrow pulse width | 532 nm | 1-50 mJ | <4 Hz | – | – | – | ~1 | <3 | Conduction (DPS-532-E-I) / Air cooled (DPS-532-E-II) | <15 | – | 15-30 | – | – | <1ns (Int.) | – | 109 | – | – | – | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | <5%, <3% | PSU-DPS-E (24V/18.8 A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-A | 532 nm | 1-10 mJ | <10 Hz | – | – | – | ~2.5 | – | Conduction cooled | <15 | – | 15-30 | – | <10 | <1ns (Int.) | – | 10 9 | – | – | PSU-DPS-A-I/PSU-DPS-A-II/PSU-DPS-A-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-H M²<1.5 | 532 nm | 1-1000 mJ | <4 Hz | – | – | – | ~2.5 | <2 | Water cooled | – | – | 15-35 | – | <4 | <1ns (Int.) | diode / pumped / all / solid / state | 109 | – | <1.5 | PSU-DPS-H | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-B | 532 nm | 1-10 mJ | <10 Hz | – | – | – | ~3 | ~1 | Air cooled | <15 | – | 15-30 | – | <10 | <1ns (Int.) | diode pumped / all / solid / state | 109 | – | – | PSU-DPS-B | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-P-Subnano | 532 nm | 1-15 mJ | 1-100 Hz | <500 ps | – | – | – | <3 | Water cooled | <15 | – | 15-30 | – | – | – | – | 109 | – | – | PSU-DPS-Subnano | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-Q High rep.rate | 532 nm | 1-1000 mJ | ~10 Hz | – | – | – | ~2 / ~2.5 / ~3 / ~4 / ~2 | <2 | Water cooled | <15 | – | 15-35 | – | <12 / <12 / <12 / <10 / <10 | <1ns (Int.) | – | 109 | – | – | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532- Neoma | 532 nm | 1-100 mJ | <12 Hz | – | – | – | ~3.5×3.5 | ≤8 | Air cooled | <15 | 48V/7.3A | 15-35 | – | <12 | <1ns (Int.) | diode / pumped / all / solid / state | 10 9 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-BS-D | 532 nm | 1-20 mJ | <10 Hz | – | – | – | ~5 | ≤3 | Air cooled | <15 | – | 15-30 | – | <10 | <1ns (Int.) | diode / pumped / all / solid / state | 10 9 | – | – | – | – | – | – | – | – | – | – | PSU-DPS-BS-D | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532- G | 532 nm | 100 mJ | <10 Hz | – | – | – | ~7.5 | – | Water cooled | <15 | – | 15-35 | – | <10 | <1ns (Int.) | diode / pumped / all / solid / state | 109 | – | – | PSU-DPS-G | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Beam divergence, full angle (mrad) / <3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-PA | 532 nm | 200 mJ | ~10 @200 Hz | – | – | – | – | – | Water cooled | – | – | 15-35 | >10000 | ~10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1-10 | – | – | – | – | – | – | – | <5%, <3% | PSU-HPL-PA*3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-PB | 532 nm | 500 mJ | ~10 @500 Hz | – | – | – | – | – | Water cooled | – | – | 15-35 | >10000 | ~10 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1-25 | – | – | – | – | – | – | – | <5%, <3% | PSU-HPL-PB*3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Subnano | 532 nm | 15-100 mJ | 1-10 Hz | <500 ps | – | – | ~7 | <3 | Water cooled | <15 | – | 15-30 | – | – | – | – | 107-108 | – | – | PSU-LPS-Subnano | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-A | 532 nm | 1-10 mJ | ~10 Hz | – | – | – | <6 | – | Closed-loop liquid cooling | <15 | – | 20-25 | – | <12 / <10 | <1ns (Int.) | lamp / pumped / solid / state | – | – | – | PSU-LPS-A(3U) | – | Beam divergence, full angle (mrad) / ~1.5 / ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 107-108 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-S | 532 nm | 1-20 mJ | ~10 Hz | – | – | – | 5 | – | Water cooled | <15 | – | 15-35 | – | – | – | lamp / pumped / pulsed / laser / at | 107 | – | – | PSU-LPS-S | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 0.9 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-L | 532 nm | 1-10 mJ | ~10 Hz | – | – | – | 7 / 8 / 9 | – | Water cooled | <15 | – | 15-35 | – | <10 / <10 / <8 | <1ns (Int.) | lamp / pumped / solid / state | 107-108 | – | – | PSU-LPS-L(3U) | – | Beam divergence, full angle (mrad) / ~1 / ~1 / ~3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Q Small size | 532 nm | 1-10 mJ | <10 Hz | – | – | – | ~7 / ~9 | <3 | Water cooled | <15 | – | 15-35 | – | <10 | <1ns (Int.) | – | 107-108 | – | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| NS-FH-532 | 532 nm | 100 uJ | 0.2-10 MHz | 2-10 ns @1.5 MHz | – | – | – | <1 | Water cooled | <10 | – | 10-35 | >10000 | – | – | – | – | TEM00 | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1-30 | <2%, <1% | >100:1 Horizontal | RAD1PS | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1047 | 1047 nm | 1-1000 uJ | 10-1000 Hz | – | – | – | – | – | Air cooled | <10 | – | 10-35 | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | >100:1 Vertical | 12V/6.67A | 1-50 | <1.2 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1053 | 1053 nm | 1-1000 uJ | 10-1000 Hz | – | – | – | – | – | Air cooled | <10 | – | 10-35 | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | >100:1 Vertical | 12V/6.67A | 1-50 | <1.2 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1064 | 1064 nm | 75-150 uJ | 0-1000 Hz | – | – | – | – | – | Air cooled | <10 | – | 10-35 | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | >100:1 Vertical | 12V/6.67A | 1-50 | <1.2 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-P-Subnano | 1064 nm | 1-1000 uJ | 0.5-2 kHz | <1 ns | – | – | – | <3 | Air cooled / Water cooled | <15 | – | 15-30 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-P-Subnano (110/220VAC) / 24V/21A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064 - Subnano | 1064 nm | 1-1000 uJ | 10-10 kHz | <1.5 ns @1 kHz | – | – | ~1mm | <3mrad | Air cooled | <15 | – | 15-30 | >10000h | – | – | – | – | – | – | PSU-EO-Subnano | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-G M²<1 .2, Air cooled | 1064 nm | 0.3-2.5 mJ | 1-100 kHz | ~8 ns @5 kHz | – | – | ~1 | <3 | – | <15 | – | 15-30 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-G (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-H M²<1.5 | 1064 nm | 1-10 mJ k | ~7 Hz | – | – | – | ~1 | <3 | Conduction (EO-1064-H-I) / Air cooled (EO-1064-H-II) | <15 | – | -20~55 | >10000 | – | – | – | – | – | <1.5 / <2 | – | <2%, <1% | – | <20 | – | – | PSU-EO-H (24V/13A) | energy, | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064- N | 1064 nm | 1-1.5 mJ | 1 Hz-25 kHz | ~7 ns | – | – | ~1 | <3 | Air cooled or water cooled | <15 | – | 15-30 | >10000 | – | – | – | – | – | <1.5 / <2 | – | <2%, <1% | – | <20 | – | – | PSU-EO-N (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-D | 1064 nm | 1~4 mJ | 1-5 kHz | <10 ns @5 kHz | – | – | ~1 | <3 | Water cooled | <15 | – | 15-30 | >10000 | – | – | diode / pumped / all / solid | – | – | <1.3 | PSU-EO-D | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-Subnano-Hi | 1064 nm | 1-4000 uJ | 10 Hz-10 kHz | <1.5 ns @<5 kHz | – | – | ~2mm / ~2.5mm | <3mrad | Air cooled or water cooled | <15 | 24V/21A | 15-30 | >10000 | – | – | diode / pumped / all / solid | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | 10 / 20 | 1mm, 0.22NA | SMA905 | 1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Metal | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-P-Subnano | 1064 nm | 1-30 mJ | 1-100 Hz fixed | <500 ps | – | – | – | <3 | Water cooled | <15 | – | 15-30 | – | – | – | – | 109 | – | <2 | PSU-DPS-Subnano | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-H M²<1.5 | 1064 nm | 15-30 mJ | 1-1000 Hz (<200 kHz optional) | <5 ns | – | – | ~2.5 | <2 | Water cooled | – | – | 15-35 | – | – | <1ns (Int.) | – | – | – | <1.5 | PSU-DPS-H | – | – | – | – | – | – | energy, / high / beam | – | – | – | – | – | – | – | – | <3%,<2%,<1% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-E Narrow pulse width | 1064 nm | 1-50 mJ | <4 Hz | – | – | – | ~1 | <3 | Conduction (DPS-1064-E-I) / Air cooled (DPS-1064-E-II) | <15 | – | 15-30 | – | <4 | <1ns (Int.) | – | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | PSU-DPS-E (24V/18.8 A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-P-Mini | 1064 nm | 10/ 20 mJ EXT (adjustable) | 3 Hz±1 | – | – | – | – | <3 / / | Conduction cooled | – | PSU-DPS-P-Mini-I/ PSU-DPS-P-Mini-II (24V/18.8 A) | 15-30 | – | 3±1 | – | – | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <50 / / | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064- D M²≤1.5 | 1064 nm | 1-100 mJ | <10 Hz | – | – | – | ~1 / ~2 | ≤3 | Air cooled | – | 24V/18.8A | 15-35 | – | – | <1ns (Int.) | diode / pumped / all / solid / state | 109 | – | ≤1.5 | – | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-A | 1064 nm | 1-10 mJ | ~10 Hz | – | – | – | ~2.5 / ~3 | <3 | Conduction cooled | <15 | – | 15-30 | – | <10 | <1ns (Int.) | – | 109 | – | – | PSU-DPS-A-I/PSU-DPS-A-II/PSU-DPS-A-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% / <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-B | 1064 nm | 1-10 mJ | <10 Hz | – | – | – | ~3 | ~1 | Air cooled | <15 | – | 15-30 | – | – | <1ns (Int.) | diode / pumped / all / solid / state | 10 9 | – | – | PSU-DPS-B | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064- Neoma | 1064 nm | 1-100 mJ | <13 Hz | – | – | – | ~3.5×3.5 | ≤9 | Air cooled | <15 | 48V/7.3A | 15-35 | – | – | – | diode / pumped / all / solid / state | 10 9 | – | – | – | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-BS-D | 1064 nm | 1-20 mJ | <10 Hz | – | – | – | ~5 | ≤3 | Air cooled | <15 | – | 15-30 | – | – | <1ns (Int.) | – | 10 9 | – | – | – | – | – | – | – | – | – | energy, / short / pulse | PSU-DPS-BS-D | – | – | – | – | – | – | – | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-Q High rep.rate | 1064 nm | 1000 mJ | ~10 Hz | – | – | – | ~2 / ~2.5 / ~3 / ~4 / ~2 | <2 | Water cooled | <15 | – | 15-35 | – | – | <1ns (Int.) | – | 109 | – | – | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | <3%, <2% / <3%, <2%,(<1% optional) / <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064- G | 1064 nm | 50~300 mJ | 100 Hz | <12 ns | – | – | ~7.5 | <3 | Water cooled | <15 | – | 15-35 | – | – | <1ns (Int.) | – | – | – | – | PSU-DPS-G | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LR-1064-20 | 1064 nm | 20 mJ | <10 Hz | – | – | – | ~30 | ≤0.5 | Air cooled | <15 | – | -40~60 | – | – | – | – | 5×107 | – | – | – | – | – | – | – | – | – | energy, / short / pulse | 24V DC | – | – | – | – | – | – | – | <3% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 year | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-1064-Subnano | 1064 nm | 30-200 mJ | 1-10 Hz | <500 ps | – | – | ~7 | <3 | Water cooled | <15 | – | 15-30 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | PSU-LPS-Subnano | 107-108 | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-1064-A | 1064 nm | 1-10 mJ | ~10 Hz | – | – | – | <6 | ~2 / ~1 | Closed-loop liquid cooling | <15 | – | 20-25 | – | <10 | <1ns (Int.) | lamp / pumped / solid / state | – | – | – | PSU-LPS-A(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 107-108 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-1064-S | 1064 nm | 50-300 mJ | 1-10 (<20 Hz optional) | ~10 ns | – | – | <6 / ~7 | ~1 / <3 | Water cooled | <15 | – | 15-35 | – | – | <1ns (Int.) | lamp / pumped / solid / state | 107-108 | – | – | PSU-LPS-S (3U) | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-1064- Q Small size | 1064 nm | 1-10 mJ | <10 Hz | – | – | – | ~7 / ~9 | <3 | Water cooled | <15 | – | 15-35 | – | <10 | <1ns (Int.) | lamp / pumped / solid / state | 107-108 | – | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-1064- L | 1064 nm | 350-1000 mJ | 1-10 (<20 Hz optional) | ~10 ns | – | – | ~7 / ~9 | – | Water cooled | <15 | – | 15-35 | – | – | <1ns (Int.) | lamp / pumped / solid / state | 107-108 | – | – | PSU-LPS-L(3U) | – | Beam divergence, full angle (mrad) / ~1 / <3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-1064-M Long pulse | 1064 nm | 1 J-10 J | 1-20 Hz | 0.1-20 ms | – | – | ~8 | ~5 | Water cooled | <15 | – | 15-35 | – | – | – | – | >106 | – | – | PSU-LPS-M(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3%, <2% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| NS-FH-1064 | 1064 nm | 200 uJ | 0.2-10 MHz | 2-10 ns @1.5 MHz | – | – | – | <1 | Water cooled | <10 | – | 15-35 | >10000 | – | – | – | – | TEM00 | <1.3 | – | – | – | – | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | >100:1 Vertical | RAD1PS | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| 1573 | 1573 nm | 1~5 mJ | 1-10 Hz | – | – | – | – | – | Air cooled | <10 | – | 10-35 | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | >100:1 Vertical | 12V/6.67A | 1-50 | <1.2 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1573-Q | 1573 nm | 1-50 mJ | <8 Hz | – | – | – | – | – | Water cooled | <15 | – | – | – | – | <1ns (Int.) | – | >109 | – | – | PSU-DPS-Q | – | – | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | ~3 | 15-30 | – | – | – | – | – | – | Datasheet |
| 2940 | 2940 nm | 100-200 mJ | 2-5 Hz | – | – | – | – | – | Air cooled | <10 | – | 10-35 | >10000 | – | – | – | – | TEM00 | – | – | – | – | – | – | – | – | duration, / high | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%, <1% | >100:1 Vertical | 12V/6.67A | 1-50 | <1.2 | LASER HEAD (780) / POWER SUPPLY | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-527-PIV | 527 nm | 1-20 mJ | 0.2-10 kHz fixed | ~200 ns @1 kHz | – | – | ~5 | – | Water cooled | <15 | – | 15-35 | >10000 | – | – | diode / pumped / all / solid / state | – | – | – | PSU-DPS-PIV | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <2%,<1%,<0.5% | Beam divergence, full angle (mrad) / ~5 | <50 | 0-500 (can be customized) | – | – | Datasheet |
| DPS-1064-PIV | 1064 nm | 1-20 mJ | <10 Hz | – | – | – | – | ≤3 | Air cooled | <15 | 24V/25A | -20-55 | – | – | – | – | 10 9 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 0-50000 | – | Datasheet |
| DPS-1573-A | 1573 nm | 1~5 mJ | 1-10 Hz | – | – | – | ~3 | ≤8 | Air cooled | <15 | – | 15-30 | – | – | – | – | >109 | – | – | PSU-DPS-A | – | – | – | – | – | – | – | – | – | Energy stability (rms) / <5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-280-R | 280 nm | 1-500 uJ | 1-100 Hz | – | – | – | ~2×2 | <25 | Air cooled or water cooled | <15 | 48V/7.3A | 15-30 | – | <10 | <1ns (Int.) | – | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-527-Q | 527 nm | 1-20 mJ | 0.2-10 kHz fixed | – | <2%, <1%, <0.5% | – | – | – | Water cooled | <15 | – | 15-35 | >10000 | – | – | diode / pumped / all / solid / state | – | – | – | PSU-DPS-Q | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <50 | – | – | – | – | – | – | – | – | – | Beam divergence, full angle (mrad) / ~5 | – | – | – | – | Datasheet |
| EO-1047-N | 1047 nm | 1-1000 uJ | 10-1000 Hz | – | <5% | – | ~1mm | <3mrad | Air cooled | <15 | – | 15-30 | >10000h | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-N (24V/13A) | – | – | – | Rep. rate / 10Hz, 100Hz, 200Hz, 500Hz, 1000Hz optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Power stability (rms, 4 hours ±3℃) / <5% | Datasheet |
| EO-1053-N | 1053 nm | 1-1000 uJ | 10-1000 Hz | – | <5% | – | ~1mm | <3mrad | Air cooled | <15 | – | 15-30 | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-N (24V/13A) | – | – | – | Rep. rate / 10Hz, 100Hz, 200Hz, 500Hz, 1000Hz optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Power stability (rms, 4 hours ±3℃) / <5% | Datasheet |
| EO-213-Subnano-Hi | 213 nm | 1-100 uJ | 100 Hz-10 kHz | – | <5% | – | ~1.5 | ≤3 | Air cooled or water cooled | – | 24V/21A | 15-30 | >10000 | – | – | diode / pumped / all / solid | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-2940-S | 2940 nm | 100-200 mJ | 2-5 Hz | – | – | – | 5 | – | Water cooled | <15 | – | 15-35 | – | – | – | lamp / pumped / pulsed / laser / at | 107 | – | – | PSU-LPS-S | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 0.9 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
213nm UV Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | Power stability (rms) | Pulse width (ps) | Jitter (ns, sdev) | Beam divergence, full angle (mrad) | Beam diameter (mm) | Rep. rate | Cooled method | Warm-up time (minutes) | Operating temperature (℃) | Power supply (110/220VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPS-213-Pico | 213 nm | 1~30 mW | <5%, <3% | <50 | <1ns | <3 | ~2 | 5MHz | Air cooled | <15 | 15-30 | PSU-DPS-Pico | Datasheet |
263nm UV Ultraviolet Laser.
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| AO-S-263-H/1-15uJ | 263 nm | 1-15 mW | |
| AO-U-263/1-60uJ | 263 nm | 1-200 mW |
289nm Q Switched UV Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| AO-K-289/1-5uJ | 289 nm | 1~50 mW |
523.5 NM Green Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| AO-U-524/1mJ | 524 nm | 3 W |
Raman Spectrometer |
1 model| Model | Wavelength | |
|---|---|---|
| Laser Source | 1064 nm |
Laser Application Systems |
1 model| Model | Wavelength | |
|---|---|---|
| Laser for Medical Treatment | 532, 561, 589, 1064 nm |
THE Manufacturer Q Switched 1064nm Laser
48 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Operating voltage（VDC） | Expected lifetime（hours） | Beam diameter at the aperture 1/e2 (mm) | Power supply (100-240VAC) | Operating temperature | Jitter (ns, sdev) | energy | pulse | Beam diameter (mm) | Expected lifetime (pulses) | Energy stability (std dev/mean) | Power supply (VDC) | Power supply (110/220VAC) | Expected lifetime (pluses) | Pointing stability (urad, std) | Power supply (24VDC) | M2 | Pointing stability over temperature (urad/℃) | Power supply | Polarization | Relative humidity | Power supply (220/110VAC) | Warranty period | Jitter (ns, sdev) (optional) | Warm-up time(minutes) | Power supply (220VAC) | Energy stability | Power supply (220/380VAC) | Cooled | Beam diameter at the aperture (mm) | Pointing stability over temperature (μrad/°C) | (Fan cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-1064A | 1064 nm | 1000 mW& 500 | 1000 uJ & 500 uJ | 1-10 kHz | ~12 ns @1 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Horizontal | <10 | Air cooled | 10-35 | 12V/25A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-1064W-HE | 1064 nm | 20 W | 2 mJ | 5-100 kHz | ~20 ns @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | Water cooled | 10-35 | 24V/20.9A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-1064 | 1064 nm | 500-3000 mW | 10-200 uJ | 1-300 kHz | ~20 ns @10 kHz~15 @50 kHz~15 @300 kHz | <2%, <1% | <1.2 | TEM00 | < 4.5 | – | <10 | Air cooled | 10-35 | – | – | 24V/14.5A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-1064 | 1064 nm | 1-2500 mW | 1-350 uJ | 1 Hz-100 kHz | 5-11 ns @<10 kHz | <5%, <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Horizontal (Vertical optional) | <10 | – | 10-35 | – | >10000 | – | – | ~1.2 | PSU-AOM-DL | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-1064 | 1064 nm | 1-7 W | 1-700 uJ | 1-100 kHz | 35 ns @10 kHz | <2%, <1% | <1.1 | TEM00 | <3.5 | >100:1 Horizontal | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-1064-HE | 1064 nm | 2/ 4 W | 2 mJ | 1 Hz-10 kHz | ~12 ns @1 kHz | <2%, <1% | <1.2 | – | <4 | >100:1 | <10 | Air cooled | 10-35 | 24V/20.9A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-UA-1064 | 1064 nm | 1-3 W | 300-500 uJ | 1 Hz~10 kHz | ~10 ns @1 kHz~15 @5 kHz~25 @10 kHz | <2%, <1% | <1.2 | – | ~3.5 | >100:1 Vertical | <10 | Air cooled | – | – | >10000 | – | – | – | PSU-AOM | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-V-1064A | 1064 nm | 10/ 20 W | 1 mJ | 1-10 kHz 20-200 kHz | 12 ns @<20 kHz | <2%, <1% | <1.2 | – | <1.5 | >100:1 Horizontal | <10 | Air cooled | 10-35 | 24V/21A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-X-1064 | 1064 nm | 1-20 W | 1-670 uJ | 10-100 kHz | ~20 ns @30 kHz | <5%, <3% | <1.5 | – | <2 | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-D | 1064 nm | 100-1000 mW | 1-10 mJ | 1-100 Hz | <10 ns | – | ≤1.5 | – | ≤3 | – | – | Air cooled | 15-35 | 24V/18.8A | – | – | – | – | – | – | <1ns (Int.) | diode / pumped / all / solid / state | energy, / short / pulse | ~1 / ~2 | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-E | 1064 nm | 150-400 mW | 3-8 mJ | 1-50 Hz | <4 ns | – | – | – | <3 | – | <15 | Conduction (DPS-1064-E-I) / Air cooled (DPS-1064-E-II) | 15-30 | – | – | – | – | – | – | – | <1ns (Int.) | – | – | ~1 | 109 | <5%, <3%, <2% | PSU-DPS-E (24V/18.8 A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-H | 1064 nm | 15-30 W | 15-30 mJ | 1~1000 Hz | <5 ns | – | <1.5 | – | <2 | – | – | Water cooled | 15-35 | – | – | – | – | – | – | – | <1ns (Int.) | – | energy, / high / beam | ~2.5 | – | <3%,<2%,<1% | – | PSU-DPS-H | 109 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-LR | 1064 nm | 1-1.6 W | 50-80 mJ | 20 Hz | < 10 ns | – | – | – | ≤0.5 | – | <15 | Air cooled | -40-60 | 24V/18.8A | – | – | – | – | – | – | – | – | energy, / short / pulse | ~30 | 5×107 | <2%, <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-Pico | 1064 nm | 5-30 W @1 MHz | 5-30 uJ @1 MHz | 100 kHz-10 MHz (adjustable) | <50 ps 50-1000(adjustable) | <3%, <2%, <1% | <1.5 | – | – | – | – | Air cooled (DPS-1064-Pico-I); Water cooled (DPS-1064-Pico-II) | 15-30 | – | >10000 | – | – | – | – | – | – | – | – | ~2 | – | – | – | PSU-DPS-Pico | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-1064-Q | 1064 nm | 100-4000 mW | 1-40 mJ @1-100 Hz | 1-1000 Hz | ~10 ns | – | – | – | <2 | – | <15 | Water cooled | 15-35 | – | – | – | – | – | – | – | <1ns (Int.) | – | energy, / short / pulse | ~2 / ~2.5 / ~3 / ~4 / ~2 | 109 | <3%, <2% / <3%, <2%,(<1% optional) / <3%, <2% | – | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-G | 1064 nm | 250 mW-7.5 W @25 kHz 500 mW-10 W @50 kHz | 10 uJ-2.5 mJ @2 kHz 10 uJ-0.2 mJ @50 kHz | 1-100 kHz | ~8 ns @5 kHz | <2%, <1% | <1 | – | <3 | – | <15 | – | 15-30 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <20 | PSU-EO-G (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-H | 1064 nm | 3-4.5 W @3 kHz | 1-1.5 mJ @3 kHz | 1-10 kHz | ~7 ns @5 kHz | <2%, <1% | <1.5 | – | <3 | – | – | Conduction (EO-1064-H-I) / Air cooled (EO-1064-H-II) | -20~55 | – | >10000 | – | – | – | – | – | – | – | energy, | ~1 | – | – | – | – | – | – | PSU-EO-H (24V/13A) | <1.5 / <2 | <20 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-P | 1064 nm | 5-150 mW | 1-30 uJ | 5 kHz | ~2.6 ns | <5%, <3% | – | – | <3 | – | <15 | Air cooled / Water cooled | 15-30 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-EO-P-Subnano (110/220VAC) / 24V/21A | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-1064-PS | 1064 nm | 5-20 W @1 MHz | 1-150 uJ | 1-100 Hz | <15 ps | <5%, <3% | ≤1.3 | – | ≤2 | – | <15 | Water cooled | 15-30 | – | >10000 | – | – | – | – | – | – | – | – | 1.5±0.5 | – | – | – | PSU-EO-PS | – | – | – | – | <50 | – | 100:1 | <60% | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-HS-1064 | 1064 nm | 1-21 W | 1-420 uJ | 1-100 kHz | ~5 ns @50 kHz | <3% | 2 | – | – | – | <10 | Water cooled | 10~35 | – | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | PSU-AOM(4U) | 1 year | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-LS-1064 | 1064 nm | 0.5-13 W | 300-600 uJ | 1-10 kHz | < 7 ns | <5%, <3% | <1.3 | – | <1.5 | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 100-240VAC | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-RS-1064 | 1064 nm | 1-100 W | 1-4 mJ | 20-100 kHz | 5 ns @50 kHz | <5%, <3% | – | – | <2 | – | – | Water cooled | 10-35 | – | >10000 | – | – | – | 24V/42A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-1064 | 1064 nm | 1-300 mW | 1-300 uJ | 1 Hz-1 kHz | ~8 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | 10-35 | – | >10000 | – | – | ~1.0 | PSU-EOM-DL | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-1064-L | 1064 nm | 1-100 mW | 1-100 uJ | 10 Hz-1 kHz | ~5 ns | <5%, <3%, <2%, <1% | <2 | TEM00 | – | – | <10 | – | 10-35 | – | >10000 | – | – | ~1.5 | PSU-EOM-L | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-1064-RS | 1064 nm | 1-1500 mW | 1-300 uJ | 1 Hz-100 kHz | ~1.3-1.8 ns @1 kHz | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | 10-35 | – | >10000 | – | – | ~1.0 | PSU-EOM-DL/PSU-EOM-L (optional)5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | Datasheet |
| EO-XS-1064 | 1064 nm | 1-10 W | 1~200 uJ | 10-100 kHz | ~4 ns @50 kHz | <5%, <3% | <1.5 | – | <3 | – | <10 | Air cooled | 10-35 | – | >10000 | – | – | – | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-1064A-PA | 1064 nm | 1-4 W | 5-20 mJ | 200 Hz | ~10 ns | <5%, <3% | – | – | <2 | – | – | Water cooled | 15-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <10 | PSU-HPL-PA | – | – | – | – | – | – | Datasheet |
| LPS-1064-M | 1064 nm | 20-200 W | 1-10 J | 1-20 Hz | ~0.1-20 ms | – | – | – | – | – | <15 | Water Cooled | 15~35 | – | – | – | – | – | – | – | – | – | – | ~8 | – | – | – | – | – | – | – | – | – | – | – | – | – | 1 year | – | – | – | <3% | PSU-LPS-M(3U) | – | – | – | – | Datasheet |
| LPS-1064-Q | 1064 nm | 3.5-8.5 W | 350-850 mJ | 1-10 Hz | ~10 ns | – | – | – | <3 | – | <15 | Water cooled | 15-35 | – | – | – | – | – | – | – | <1ns (Int.) | lamp / pumped / solid / state | – | ~7 / ~9 | 107-108 | – | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-TUN-420-1200 | 1064 nm | 10-200 mW | 1-20 mJ | 1-10 Hz | <8 ns | – | – | – | 5-30 | – | – | Water cooled | 15-35 | – | – | – | – | – | – | – | – | – | – | ~15 | 107-108 | – | – | PSU-LPS-TUN | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PA-1064 | 1064 nm | 4 W | 200 uJ | 10-20 kHz | ~5 ns | <2%, <1% | – | TEM00 | <3.5 | – | <15 | – | 10-35 | – | >10000 | – | – | – | PSU-12-P | – | – | – | – | – | – | – | – | – | – | – | – | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PC-1064 | 1064 nm | 150 mW | 50 uJ | 1-5 kHz | 6-10 ns | <3%, <2%, <1% | <1.2 | TEM00 | <4.5 | – | <15 | – | – | 24V/ 8.4A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Conduction | – | – | – | Datasheet |
| MPL-H-1064 | 1064 nm | 500-1500 mW | 20-100 uJ | 1 Hz-30 kHz | 3-10 ns | <3%, <2%, <1% | – | TEM00 | <2. 0 | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-H-1064A | 1064 nm | 200-400 mW | 20-40 uJ | 1 Hz-15 kHz | ~1.5 ns | <3%, <2%, <1% | – | TEM00 | <2. 0 | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-III-1064 | 1064 nm | 1-500 mW | 1-20 uJ | 1 Hz-20 kHz | 3-15 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-III-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-III-1064A | 1064 nm | 1-200 mW | 1-20 uJ | 1 Hz-20 kHz | ~1.5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-III-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064 | 1064 nm | 1-200 mW | 1-70 uJ | 1 Hz-4 kHz | 0.5-0.7 ns | <5%, <3%, <2% | – | TEM00 | – | 100:1, Horizontal (Vertical optional) | – | – | 10-35 | – | >10000 | – | – | – | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | ~1.0 | <8 | – | Datasheet |
| MPL-S-1064A-HF | 1064 nm | ~200 mW | ~2 uJ | ~100 kHz | ~0.5 ns | <3%, <2%, <1% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064A-HP | 1064 nm | 200-4000 mW | 2-40 uJ | ~100 kHz | ~0.5 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | Fan cooled | 10-35 | – | >10000 | – | – | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064B-HP | 1064 nm | ~2000 mW | ~50 uJ | ~40 kHz | ~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | Fan cooled | 10-35 | – | >10000 | – | – | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064-HF | 1064 nm | 75-300 mW | 15-30 uJ | 5-15 kHz | ~0.5-1 ns | <3%, <2%, <1% | – | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-1064-HP | 1064 nm | 200-1000 mW/ 200-2000 | 200-500/ 200-1000 uJ | 1 Hz-1 kHz/ 1-4 kHz | ~0.5/~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | Fan cooled / Water cooled | 10-35 | – | >10000 | – | – | – | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | (Water cooled) | Datasheet |
| MPL-S-1064-LP | 1064 nm | 1-200 mW | 70-200 uJ | 1 Hz-1 kHz | 0.5 ns | <5%, <3%, <2% | <1.5 | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-S-LP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-1064 | 1064 nm | 200-500 mW | 20-100 uJ | 1 Hz-20 kHz | 3-5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-III-FDA / / | – | – | – | – | – | – | – | PSU-III-OEM-97 (5V/5A) / PSU-T-OEM-I (12V/7A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-1064A | 1064 nm | 1-200 mW | 1-20 uJ | 1 Hz-20 kHz | ~1.5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-III-FDA | – | – | – | – | – | – | – | PSU-III-OEM-97 (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-1064B | 1064 nm | 1-8 mW/ 40/ 100 | 1-2.5/ 1-4/ 1-10 uJ | 1 Hz-1 kHz/ 4-10 kHz/10-40 kHz | 0.5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Horizontal (Vertical optional) | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-1064A-SU | 1064 nm | 400-1000 mW | 40-100 uJ | 1 Hz-15 kHz | ~1.5 ns | <3%, <2%, <1% | <2.0 | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA/ PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-1064-SU | 1064 nm | 1.5-2 W | 100-200 uJ | 1 Hz-15 kHz | ~5 ns | <3%, <2%, <1% | – | TEM00 | – | – | <5 | – | 10-35 | – | >10000 | – | – | – | PSU-H-FDA/ PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | <2.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
THE Manufacturer High Energy Q Switched Laser
47 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Cooling method | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Operating temperature | Operating voltage (VDC) | Operating temperature (℃) | Power supply (100-240VAC) | Beam diameter at the aperture 1/e2 (mm) | M2 | Jitter (ns, sdev) | Energy stability (std dev/mean) | pulse | Beam diameter (mm) | Power supply (VDC) | Expected lifetime (pulses) | energy | Power supply (110/220VAC) | of short pulse duration, high repetition rate | Pointing stability over temperature (urad/℃) | Power supply (24VDC) | Power supply | Jitter (ns, sdev) (optional) | Cooled | Beam diameter at the aperture (mm) | (Fan cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-532 | 532 nm | 8-100 W | 600 uJ | 20-400 kHz | ~13 ns @60 kHz | <2%, <1% | <1.2 | TEM00 | <3.5 | >100:1 Vertical | <10 | Water cooled | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532A | 532 nm | 8/ 10 W | 260 uJ | 20-200 kHz | ~12 ns @30 kHz | <2%, <1% | <1.2 | TEM00 | ~3.5 | >100:1 Vertical | <10 | – | >10000 | ~0.8 | Air cooled | 10-35 | 12V/25A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532W-HE | 532 nm | 20 W | 2 mJ | 7-20 kHz | ~18 ns @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | – | >10000 | – | Water cooled | – | 24V/20.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532W-LP | 532 nm | 20-30 W | 2-3 mJ | 6-20 kHz | ~100 ns @10 kHz~30 @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | – | >10000 | – | Water cooled | – | 24V/20.9A / 36V/13.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-K-280&295&532&560 | 280 nm | 100 mW & 100 & 1000 & 500 | 20& 20& 200& 100 | 1-10 kHz | ~20 ns @5 kHz | <5%, <3%, <2% | – | – | <3.5 | – | <10 | – | >10000 | – | Air cooled | – | 24V/42A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-L-532 | 532 nm | 1-3 W | 500-600 uJ | 1 Hz-10 kHz | 5-7 ns @5 kHz | <3%, <2%, <1% | – | – | ~4.5 | >100:1 Vertical | <10 | – | >10000 | – | Air Cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-532 | 532 nm | 1-5000 mW | 1-400 uJ | 1 Hz-100 kHz | ~7 ns @1 Hz-1 kHz | <2%, <1% | <1.2 | TEM00 | < 3 | >100:1 Horizontal | <10 | – | >10000 | – | Air cooled | – | 24V/14.5A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-532 | 532 nm | 1-250 mW | 1-100 uJ | 1 Hz-50 kHz | 5-10 ns @<10 kHz | <5%, <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-AOM-DL | ~1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-532-H | 532 nm | 1-1000 mW | 1-250 uJ | 1 Hz-100 kHz | ~4.8 ns @10 kHz | <3%, <2%, <1% | – | TEM00 | – | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-AOM-DL | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-532 | 532 nm | 1-6 W | 1-600 uJ | 1-100 kHz | 30~100 ns can be customized @10 kHz | <2%, <1% | <1.1 | TEM00 | <3.5 | >100:1 Vertical | <10 | – | ＞10000 | – | Air cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-532A | 532 nm | 2 W | 1 mJ | 2-8 kHz | ~23 ns @2 kHz | <2%, <1% | <1.2 | TEM00 | <3.5 | >100:1 Vertical | <10 | – | ＞10000 | – | Air cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532 | 532 nm | 3000 mW & 400 | 500-1000 uJ & 60-80 uJ | 1-10 kHz | ~12 ns | <3%, <2%, <1% | <1.2 | – | <4.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | 10-35 | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532-HE | 532 nm | 2/ 4 W | 2 mJ | 1 Hz-10 kHz | <10 ns @1 kHz | <2%, <1% | <1.2 | – | <4 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | – | 24V/20.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-UA-532 | 532 nm | 300/ 2.5-3.5 W | 300~800 uJ | 1 Hz-10 kHz | ~10 ns @1 kHz~15 @5 kHz | <2%, <1% | <1.2 | – | ~3.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | 10-35 | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-X-532 | 532 nm | 1-20 W | 1-670 uJ | 30-100 kHz | ~15 ns @30 kHz | <5%, <3% | <2 | – | – | – | <10 | – | >10000 | – | Water cooled | – | – | 10-35 | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-E | 532 nm | 50-200 mW @50 Hz | 1-4 mJ | 1-50 Hz | <4 ns | – | – | – | <3 | – | <15 | – | – | – | Conduction (DPS-532-E-I) / Air cooled (DPS-532-E-II) | – | – | 15-30 | – | – | – | <1ns (Int.) | <5%, <3% | energy, / short / pulse | ~1 | PSU-DPS-E (24V/18.8 A) | 109 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-H | 532 nm | 5-10 W @1000 Hz | 5-10 mJ | 1-1000 Hz | <4 ns | – | <1.5 | – | <2 | – | – | – | – | – | Water cooled | – | – | 15-35 | – | – | – | <1ns (Int.) | – | – | ~2.5 | – | 109 | diode / pumped / all / solid / state | PSU-DPS-H | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-Pico | 532 nm | 2-10 W @10 MHz | 0.2-1 uJ @10 MHz | 0.1-10 MHz | <50 ps | <3%, <2%, <1% | <1.5 | – | – | – | – | – | >10000 | – | Air cooled (DPS-532-Pico-I); Water cooled (DPS-532-Pico-II) | – | – | 15-30 | – | – | – | – | – | – | – | – | – | – | PSU-DPS-Pico | Beam diameter (mm) / ~2 | – | – | – | – | – | – | – | Datasheet |
| DPS-532-Q | 532 nm | 0.1-2 W @100 Hz | 1-20 mJ | 1-1000 Hz | ~10 ns | – | – | – | <2 | – | <15 | – | – | – | Water cooled | – | – | 15-35 | – | – | – | <1ns (Int.) | <5%, <3% | – | ~2 / ~2.5 / ~3 / ~4 / ~2 | – | 109 | – | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-G | 532 nm | 250-3750 mW @25 kHz | 10-1500 uJ @2 kHz | 1-100 kHz | <8 ns @5 kHz | <2%, <1% | <1 | – | <3 / <3 | – | <15 / <15 | – | >10000 | – | Air cooled (EO-532-G-I)or Water cooled (EO-532-G-III)5 / Air cooled (EO-532-G-II) | – | – | 15-30 / 15-30 | – | – | – | – | – | – | ~1 / ~1 | – | – | – | – | – | <20 / <20 | PSU-EO-G (24V/13A) / PSU-EO-G (24V/13A) | – | – | – | – | – | Datasheet |
| EO-532-H | 532 nm | 1.2-2.4 W @3 kHz | 0.4-0.8 mJ @3 kHz | 1-10 kHz (fixed) | <6 ns @5 kHz | <2%, <1% | <1.5 | – | <3 | – | – | – | >10000 | – | Conduction (EO-532-H-I) / Air cooled (EO-532-H-II) | – | – | -20-55 | – | – | <1.5 / <2 | – | – | – | ~1 | – | – | – | – | – | <20 | PSU-EO-H (24V/13A) | – | – | – | – | – | Datasheet |
| EO-HS-532 | 532 nm | 1-12 W | 1-200 uJ | 15-100 kHz | ~4 ns @50 kHz | <5%, <3% | 2 | – | <3 | – | <10 | – | >10000 | – | Water cooled | – | – | 10-35 | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-LS-532 | 532 nm | 0.6-15 W | 0.3-2 mJ | 1-10 kHz | < 6 ns @10 kHz | <5%, <3% | 1.3 | – | <1.5 | – | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 100-240VAC | – | – | – | – | Datasheet |
| EO-RS-532 | 532 nm | 1-35 W | 1-1.5 mJ | 20-100 kHz | 4 ns @50 kHz | <5%, <3% | – | – | <2 | – | – | – | >10000 | – | – | – | – | 10-35 | 24V/42A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-532 | 532 nm | 1-70 mW | 1-70 uJ | 1-1000 Hz | ~6 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | >10000 | – | – | – | – | 10-35 | PSU-EOM-DL | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-532-L | 532 nm | 1-50 mW | 1-50 uJ | 10 Hz-1 kHz | ~5 ns | <5%, <3%, <2%, <1% | <2 | TEM00 | – | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-EOM-L | ~1.5 | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-532-RS | 532 nm | 1-150 mW @1 Hz-1 kHz 1-450 @1-20 kHz | 1-150 uJ @1 Hz-1 kHz 1-50 @1-20 kHz | 1 Hz-20 kHz | ~1.3 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | >10000 | – | – | – | – | 10-35 | PSU-EOM-DL/PSU-EOM-L (optional)5 | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | <0.2 (Ext) | – | – | – | Datasheet |
| EO-XS-532 | 532 nm | 1-5 W | 1-125 uJ | 1-100 kHz | ~4 ns @40 kHz | <5%, <3% | – | – | <3 | – | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | PSU-AOM (3U) | – | ＜1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Q | 532 nm | 1.5-5 W @10 Hz | 150-500 mJ | 1-10 Hz | <10 ns | – | – | – | <3 | – | <15 | – | – | – | Water cooled | – | – | 15-35 | – | – | – | <1ns (Int.) | <3%, <2%, (<1% optional) | – | ~7 / ~9 | – | 107-108 | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PC-532 | 532 nm | 150 mW | 50 uJ | 1-5 kHz | 6-10 ns | <3%, <2%, <1% | <1.2 | TEM00 | <3 | – | <15 | – | >10000 | – | – | – | 24V/ 8.4A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Conduction | – | – | Datasheet |
| MPL-H-532 | 532 nm | 100-150 mW | 10-30 uJ | 1 Hz-15 kHz | 3-5 ns | <5%, <3%, <2%, <1% | – | TEM00 | – | – | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~0.8 | – | Datasheet |
| MPL-H-532A | 532 nm | 30-150 mW | 5-30 uJ | 1 Hz-15 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-III-532 | 532 nm | 1-100 mW | 1-10 uJ | 1 Hz-15 kHz | 3-5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-III-532A | 532 nm | 1-30 mW | 1-5 uJ | 1 Hz-15 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-N-532 | 532 nm | 150-1500 mW | 60-125 uJ | 1-15 kHz | < 2/~5 ns | <5%, <3%, <2% | <1.5 | TEM00 | <2 | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-N-FDA/PSU-N-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532A-HP | 532 nm | 100-1500 mW | 1-15 uJ | ~100 kHz | ~0.5 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled | – | – | 10-35 | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532B-HP | 532 nm | 60-900 mW | 1-20 uJ | ~40 kHz | ~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled | – | – | 10-35 | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532-HF | 532 nm | ~100 mW | ~1 uJ | ~100 kHz | ~0.5 ns | <3%, <2%, <1% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532-HP | 532 nm | 80-400 mW/ 120-700 | 80-400 uJ/ 30-175 uJ | 1 Hz-1 kHz/ 1 kHz-4 kHz | 0.5/~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled / Water cooled | – | – | 10-35 | PSU-S-HP | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | (Water cooled) | Datasheet |
| MPL-S-532-LP | 532 nm | 40-80 mW | 40-80 uJ | 1 Hz-1 kHz | ~0.5 ns | <5%, <3%, <2% | <1.5 | TEM00 | – | – | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-S-LP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-532 | 532 nm | 1-100 mW | 1-10 uJ | 1 Hz-15 kHz | 3-5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | – | – | – | – | – | PSU-III-OEM-97 (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-532A | 532 nm | 1-30 mW | 1-5 uJ | 1 Hz-15 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | <1.5 | – | – | – | – | PSU-III-OEM-97 (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-532B | 532 nm | 1-3 mW | 1-5 uJ | 1 Hz-1 kHz | ~0.5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-532 | 532 nm | 150-500 mW | 30-60 uJ | 4 kHz-12 kHz | 3-5 ns | <3%, <2%, <1%, <5% | <1.3 | TEM00 | <1.5 | – | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~1.0 | – | Datasheet |
| MPL-U-532A | 532 nm | 150-500 mW | 30-60 uJ | 4 kHz-12 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-532B | 532 nm | 3-40 mW/ 3-120 | 5-40 uJ/ 5-30 uJ | 1 Hz-1 kHz/ 1 kHz-4 kHz | ~0.5/~0.7 ns | <3%, <2%, <1% | <1.3 | TEM00 | <1.5 | >100:1, 45 degrees polarization | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-532C | 532 nm | ~60 mW | ~1 uJ | ~40 kHz | ~0.5 ns | <3%, <2%, <1% | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
1064 NM Marking Laser Series |
3 models| Model | Wavelength | Output / average power | Pulse energy | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | M2 | Polarization ratio | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-I-1064 | 1064 nm | 20 W | ~800 uJ | – | – | – | – | – | – | – | – | – | |
| AO-V-1064 | 1064 nm | 12 W/ 15 W | ~600 uJ | <2%，<1% | <1.5 | <1.2 | >100:1 Horizontal | <10 | Air cooled | 10-35 | 24V/21A | >10000 | Datasheet |
| FL-1064 | 1064 nm | 3 W/ 4 W/ 6 W/ 8 W/ 10 W | ~200 uJ | – | – | – | – | – | – | – | – | – | Datasheet |
261nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| AO-S-261-H/1-15uJ | 261 nm | 1-15 mW |
473 NM Blue Laser.
1 model| Model | Wavelength | Output / average power | Rep. | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| AO-V-473/50uJ | 473 nm | 500 mW | 1-10kHz | <5%, <3%,<2% | <2.5 | Air cooled | 10-35 | PSU-AOM | >10000 | Datasheet |
Mode Locked & Picosecond Laser |
1 model| Model | Wavelength | Output / average power | Repetition rate | Power stability | M² | Single pulse energy (mJ) | Pulse duration (ps) | Energy stability (std dev/mean) | Beam divergence, full angle (mrad) | M2 | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (110/220VAC) | Expected lifetime (pulses) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DPS-1064-PS | 1064 nm | 5-20 W | 0-1000 kHz | <3%, <5% | ≤1.3 | 1-30 | <500 | <5%, <3%, <2% | <3 | <2 | <15 | Water cooled | 15-30 | PSU-DPS-Subnano | 109 | Datasheet |
RGB Laser |
4 models| Model | Wavelength | Output / average power | Power stability | Fiber type | Fiber Core Diameter(μm) | Fiber Connector | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-1064/1064/1064/1064-CH | 1064 nm | 20/20/20/20 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
| FC-473/561/635-CH | 473 nm | 0.2/0.2/0.2 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
| FC-532/640/808/1064-CH | 532 nm | 1/0.2/0.2/1 W | <1% | SM fiber | 4~9 | FC/APC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
| FC-660/808-CH | 660 nm | 2/2 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
1710 NM IR Laser, Infrared Diode Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-1710 | 1710 nm | 1~1300 mW | |
| MDL-1710(FC) | 1710 nm | 1~430 mW |
440 NM Laser, Violet Blue Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-440 | 440 nm | 1~20 W | |
| MDL-440(FC) | 440 nm | 1~2500 mW |
552 NM Green Laser, Solid State Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-552 | 552 nm | 1~270 mW | |
| MGL-552(FC) | 552 nm | 1~1800 mW |
588nm Yellow Laser, Yellow Orange Solid State Laser, DPSS Laser |
2 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-588 | 588 nm | 1~720 mW | |
| MGL-588(FC) | 588 nm | 1~4100 mW |
660 NM RED Laser.
7 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-660 | 660 nm | 1~360 mW | |
| MLL-FN-660 | 660 nm | 1~200 mW | |
| MRL-660(FC) | 660 nm | 1~1800 mW | |
| MRL-FN-660 | 660 nm | 1~500 mW | |
| MRL-W-660A | 660 nm | 500~2000 mW | |
| PS-L-660 | 660 nm | 1~100 mW | |
| PS-M-660 | 660 nm | 1~300 mW |
FC D Series Laser for Raman Spectroscopy |
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Fiber core diameter | Fiber connector | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-D-514.5 | 514.5 nm | 1~20 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
| FC-D-660 | 660 nm | 1~200 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
Ultra Compact OEM Laser,405 NM 1319 NM OEM Laser |
10 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Fiber type | Fiber connector | Spectral line width (nm) | Fiber Core diameter | Fiber length | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Transverse mode | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Power supply (12VDC) | Storage temperature (℃) | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1064-A | 1064 nm | 500 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-1064-B | 1064 nm | 1000 mW | – | <2%, <1%, <0.5% | – | – | MM fiber | SMA905, FC/PC optional | <0.2, (<0.1 optional) | 105μm, 0.22NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-460 | 460 nm | 50 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-514.5 | 514 nm | 10 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-660 | 660 nm | 80 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-670 | 670 nm | 80 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | FC/PC, FC/APC optional | – | 4-9μm, 0.12NA | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| OEM-I-532 | 532 nm | 1-5000 mW | – | <3%, <2%, (<1% optional) | – | – | – | – | – | – | – | – | – | – | – | – | >10000 | Near TEM00 | ~1.0 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-OEM-I / PSU-I-HS | – | – | – | – | – | – | – | Datasheet |
| OEM-S-561-MD | 561 nm | 1-800 mW | – | <5% (<1% optional) | – | – | – | – | – | – | – | – | <10 | – | – | – | >10000 | TEMn1 | – | – | – | – | 0-60 | – | – | – | – | – | – | Datasheet |
| OEM-S-588-MD | 588 nm | 1-800 mW | – | <5% (<1% optional) | – | – | – | – | – | – | – | – | <10 | – | – | – | >10000 | TEMn1 | – | – | – | – | 0-60 | – | – | – | – | – | – | Datasheet |
| YL-I-660 | 660 nm | 8 W | 2 nm | <2%, <1% | 0.5% | – | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | – | – | – | – | – | – | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | 0-30 | 100-240 | Datasheet |
1305nm DFB Laser, Infrared Laser, DPSS Laser |
5 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-OEM-1305 | 1305 nm | 1~15 mW | |
| MDL-III-1305DFB-SM | 1305 nm | 1~15 mW | |
| MDL-III-1305-SM | 1305 nm | 1~15 mW | |
| MLL-III-1305-SM | 1305 nm | 1~15 mW | |
| TEM-F-1305DFB | 1305 nm | 1~10 mW |
1658nm DFB Laser, Infrared Laser, DPSS Laser |
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Transverse mode | Power supply (100-240VAC) | Noise of amplitude (rms, 20Hz-20MHz) | Spectral line width (MHz) | M2 | Beam divergence, full angle (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1658 | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | 0.8m | 0.9mm PVC | ~1.1 | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | Datasheet |
| MDL-III-1658DFB-SM | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | Metal, PVC optional | ~1.1 | <5 | Conduction | 10-35 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | Datasheet |
| MDL-III-1658-SM | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | Metal, PVC optional | ~1.1 | <5 | Conduction | 10-35 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | Datasheet |
| MLL-III-1658-SM | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | Metal, PVC optional | ~1.1 | <5 | Conduction | 10-35 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | – | Datasheet |
| TEM-F-1658 | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | – | – | – | – | – | – | <5 | – | 25±3 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | <1.5 | Datasheet |
| TEM-F-1658DFB | 1658 nm | 1~5 mW | <2%, <1%, <0.5% | – | – | – | – | – | – | <5 | – | 25±3 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | <1.5 | Datasheet |
| TEM-LN-1658 | 1658 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
1742nm DFB Laser, Infrared Laser, DPSS Laser |
7 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Transverse mode | Power supply (100-240VAC) | Noise of amplitude (rms, 20Hz-20MHz) | Spectral line width (MHz) | M2 | Beam divergence, full angle (mrad) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-1742 | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | 0.8m | 0.9mm PVC | ~1.1 | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | Datasheet |
| MDL-III-1742DFB-SM | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | Metal, PVC optional | ~1.1 | <5 | Conduction | 10-35 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | Datasheet |
| MDL-III-1742-SM | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | Metal, PVC optional | ~1.1 | <5 | Conduction | 10-35 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | Datasheet |
| MLL-III-1742-SM | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | Metal, PVC optional | ~1.1 | <5 | Conduction | 10-35 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | <1%, <0.5% | – | – | – | Datasheet |
| TEM-F-1742 | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | – | – | – | – | – | – | <5 | – | 25±3 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | <1.5 | Datasheet |
| TEM-F-1742DFB | 1742 nm | 1~5 mW | <2%, <1%, <0.5% | – | – | – | – | – | – | <5 | – | 25±3 | – | >10000 | TEM00 | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | ~3 | <1.1 | <1.5 | Datasheet |
| TEM-LN-1742 | 1742 nm | 1~5 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Nanosecond Fiber Laser |
8 models| Model | Wavelength | Output / average power | Pulse width | Power stability | M² | Single pulse energy (uJ) | Energy stability (rms) | features of high output power stability, good | Rep. rate | Transverse mode | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Polarization state (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC/VDC) | Expected lifetime (hours) | High frequency all fiber pulsed laser at | M2 | Fiber length (m) | Polarization ratio(dB) | Operating voltage (VDC/VAC) | Polarization ratio (dB) | Operating voltage (VDC) | Pulsed width (ns) | Fiber Jacket | frequency | stability, good | fiber | Single pulse energy(nJ) | lifetime, | Delivery fiber length (m) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1064-AO | 1064 nm | 1-20 uJ | 0.5-50 ns | – | <1.1 | >2 / >20 | <3%, <2% | Pulsed width (ns) / 0.5-5 / 5-50 | 1-1000kHz (adjustable) | TEM00 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 110/220VAC or 12V/11.5A | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1064-Nano | 1064 nm | 0.5-30 W | 0.5-250 ns (Adjustable) | <3%, <2% | <1.3 | – | – | – | 100kHz-1MHz(adjustable) / 20kHz-1MHz | – | FC/APC, Collimator optional / Collimator | – | PVC, Metal optional | 4±1 (Collimator output) / 6±1 (Collimator output) | – | <15 | Air cooled | 15-35 | – | >10000 | Power stability (rms, 4 hours ±3℃) / <3%, <2% | <1.8 / <1.3 | 1 / 4 | Random / > 15 | 12V/11.5A or 110/220VAC / 24V/21A | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1064-S | 1064 nm | 1 uW-500 mW Peak power | 5-100 ns (Adjustable) | <3%, <2%, <1% | <1.2 | – | – | – | 1Hz-100KHz, 1Hz-10MHz (adjustable) | – | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | – | <5 | Conduction | 15-35 | – | >10000 | Power stability (rms, 4 hours ±3℃) / <3%, <2%, <1% | – | 1 | – | – | Random / >15 | 12V/11.5A | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1550-AO | 1550 nm | 1-20 uJ | 0.5-50 ns | – | <1.1 | >2 / >20 | <3%, <2% | – | 1-200Hz (adjustable) | TEM00 | FC/APC, Collimator optional | 1 | – | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 110/220VAC or 12V/11.5A | >10000 | – | – | – | – | – | – | – | 0.5-5 / 5-50 | PVC, Metal optional | – | – | – | – | – | – | – | Datasheet |
| FL-1550-Nano | 1550 nm | 50-1000 mW | 0.5-50 ns (Adjustable) | <3%, <2% | <1.5 | – | – | – | 50kHz-1MHz | TEM00 | FC/APC, Collimator optional | – | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | – | Air cooled | 15-35 | – | >10000 | – | – | 1 | – | 12V/11.5A or 110/220VAC | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-1550-S | 1550 nm | 1 uW-10 mW Peak power | 5-100 ns (Adjustable) | <3%, <2%, <1% | <1.2 | – | – | – | 1Hz-100KHz, 1Hz-10MHz (adjustable) | – | – | – | – | 4±1 (Collimator output) | – | <5 | Conduction | 15-35 | – | >10000 | – | – | – | – | – | Random / >15 | 12V/11.5A | – | – | all / fiber / pulsed | beam / profile, | sensing, / life | – | – | – | – | Datasheet |
| FL-532-AO | 532 nm | 10-100 nJ | 0.5-50 ns | – | <1.2 | – | <3%, <2% | – | – | TEM00 | – | – | – | – | – | <15 | Air cooled | 15-35 | – | >10000 | – | – | – | – | – | >15 Horizontal (Vertical optional) | 12V/11.5A | 0.5-5 / 5-50 | – | – | – | – | 10-100 | Rep. rate / 1-1000Hz (adjustable) | – | – | Datasheet |
| FL-532-Nano | 532 nm | 1 mW-20 W | 0.5-50 ns | <3%, <2% | <1.3 | – | – | – | 100kHz-1MHz / 20kHz-1MHz | – | – | – | – | – | – | <15 | Air cooled | 15-35 | – | >10000 | – | <1.8 / <1.3 | – | – | – | >15 Horizontal (Vertical optional) | 12V/11.5A / 24V/21A | – | – | – | – | – | – | – | 0.6 / 4 | Second harmonic | Datasheet |
LOW Noise Fiber Laser |
5 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Longitudinal mode | Current adjustment range | M2 | Fiber connector | Fiber length(m) | Fiber jacket | Beam diameter (mm) | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (VAC) | Expected lifetime (hours) | Frequency shift (MHz) (over ±2℃and 8 hours) | characteristics of ultra-stable output power, | Free space output power (W) | Operating voltage (VAC) | Fundamental Frequency | Free space output power (mW) | Fiber coupled output power (mW) | Frequency shift (MHz) (over ±2℃and 8hours ) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1064-LN-H | 1064 nm | 10-50 W | <0.004 nm | <1%, <0.5% | <0.05% | – | TEM00 | SLM | 1-100% | <1.1 | Collimator | <3 | Metal | 4±1 (Collimator output) | <5 / <10 | >15, after PM fiber | <30 | Air cooled (≤20W) / Water cooled (≤50W) | 15-30 | 110/220VAC | >10000 | – | – | – | – | – | – | – | – | Datasheet |
| FL-1064-LN-L | 1064 nm | 1-10000 mW | <0.004 nm | <2%, <1%, <0.5% | <0.05% | <1.1 | TEM00 | SLM | 1-100% | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | – | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | <±200 | – | – | – | – | – | – | – | Datasheet |
| FL-1550-LN-L | 1550 nm | 1-10000 mW | <0.004 nm | <2%, <1%, <0.5% | <0.05% | <1.1 | TEM00 | SLM | – | – | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | <5 / <10 | >15, after PM fiber | <30 | Air cooled or Water cooled | 15-30 | 110/220VAC | >10000 | – | Current adjustment range / 1-100% | – | – | – | – | – | – | Datasheet |
| FL-532-LN-H | 532 nm | 3-10 W | <0.002 nm | <2%, <1% | <0.1% | – | TEM00 | SLM | 1-100% | <1.1 | – | – | – | ~1 | <15 / <50 | >20 Horizontal (Vertical optional) | <30 | Water cooled | 15-30 | – | >10000 | – | – | 3-10 | 110/220V | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | Datasheet |
| FL-532-LN-L | 532 nm | 1-3000 mW | <0.002 nm | <2%, <1% | <0.05% | – | TEM00 | SLM | 1-100% | <1.1 | FC/APC | 1 | PVC, Metal optional | – | – | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | – | >10000 | – | – | – | 110/220V | – | 1-3000 | 1-500 | <±200 | Datasheet |
Picosecond Fiber Laser |
7 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | M² | stability, | Fiber connector | Fiber length (m) | Fiber jacket | Beam diameter (mm) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC/VAC) | Expected lifetime (hours) | fiber | M2 | Operating voltage (VDC) | Delivery fiber length (cm) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-1064-Pico | 1064 nm | 10-5000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | M2 / <1.2 / <1.8 | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / >15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | – | – | Datasheet |
| FL-1064-PS | 1064 nm | 1-2000 mW | 20-60 MHz | <10 ps | <3%, <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | Random / > 15 | <15 | Air cooled | 15-35 | – | >10000 | pulsed / laser / at | <1.2 / <1.5 | 12V/11.5A | – | – | Datasheet |
| FL-1064-PS-Seed | 1064 nm | 0.5-1 mW | 20-60 MHz | <10 ps | <3%, <2%, <1% | <1.2 | – | FC/APC | 1 | PVC, Metal optional | – | Random / > 15 | <15 | – | 15-35 | – | >10000 | – | – | 12V/11.5A | – | – | Datasheet |
| FL-1550-Pico | 1550 nm | 100-1000 mW | 0.1-20 MHz | 100-900 ps | <3%, <2% | <1.2 | Rep. rate3 / 100kHz-20MHz | FC/APC, Collimator optional | 1 | PVC, Metal optional | 4±1 (Collimator output) | Random / > 15 | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | – | – | Datasheet |
| FL-1550-PS | 1550 nm | 1-2000 mW | 20-60 MHz | <10 ps | <3%, <2%, <1%, <0.5% | <1.2 | – | – | – | – | – | Random / > 15 | <15 | Air cooled | 15-35 | – | >10000 | pulsed / laser / at | <1.2 / <1.5 | 12V/11.5A | – | – | Datasheet |
| FL-532-Pico | 532 nm | 1-1000 mW | 0.1-20 MHz | 100-900 ps | <5%, <3%, <2% | <1.5 | – | – | – | – | – | >15 Horizontal (Vertical optional) | – | Air cooled | 15-35 | – | >10000 | – | <1.5 / <2 | 12V/11.5A | 60 | Second harmonic | Datasheet |
| FL-532-PS | 532 nm | 1-150 mW | 20-60 MHz | <10 ps | <3%, <2% | <1.5 | – | – | – | – | – | >15 Horizontal (Vertical optional) | – | Air cooled | 15-35 | – | >10000 | – | – | 12V/11.5A | 60 | – | Datasheet |
Single Frequency Fiber Laser |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | |
|---|---|---|---|---|---|---|---|
| FL-1550-SLM | 1550 nm | 1-10000 mW | <10 kHz, <5 kHz | <2%, <1%, <0.5% | <0.05% optional | < 1.1 | Datasheet |
532 NM Marking Laser Series |
1 model| Model | Wavelength | Output / average power | Pulse energy | Power stability | Rep. | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-532 | 532 nm | 1.5 W/ 3 W/ 4.5 W | ~75/ 150 uJ/ 220 | <3%, <2%, <1% | ~20kHz | TEM00 | <1.5 | <10 | 10-35 | PSU-FL-FDA(12V/25A) / PSU-FL-OEM (12V/25A) | >10000 | Datasheet |
Picosecond Diode Laser |
8 models| Model | Wavelength | Output / average power | Repetition rate | Power stability | M² | Single pulse energy (nJ) | Warm-up time (minutes) | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Pulse duration (ps) | Pulse width (ps) | Operating temperature (°C) | Operating voltage (VDC) | Single pulse energy (mJ) | pulse | Pulse duration | Cooling method | M2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-H-1064-PS | 1064 nm | 1-20 W | 20-120 MHz (Fixed) | <2%, <1% | <1.2 | 1-500 | <10 | TEM00 | <1 | >100:1 Vertical | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-H-532-PS | 532 nm | 1-5000 mW | 20-120 MHz (Fixed) | <2%, <1% | <1.2 | – | <10 | TEM00 | – | >100:1 Horizontal | Air cooled | 15-35 | 12V/6.67A | >10000 | <8ps; or one fixed value between 10 ps-150 ps | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-660 | 660 nm | 1~50 mW | 0.1~20 MHz | <3%, <2%, <1% | – | – | <5 | Near TEM00 | ~1.0 | – | Air cooled | – | – | >10000 | – | 100-1000 | 10-35 | 12V/3.34A | – | – | – | – | – | Datasheet |
| MIL-PS-2910-4235 | 2910 nm | 1-2000 mW | 15 MHz | <3%, <2%, <1% | – | – | <10 | – | – | – | Waterr cooled | 15-30 | RAD1PS | >10000 | – | – | – | – | – | – | – | – | – | Datasheet |
| PS-A-1064 | 1064 nm | 1 W/ 2.5 W | 1 kHz | <5%, <3% | <1.2 | – | – | – | <1.5 | – | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | 0.1-1 / 1-2.5 | duration, / high | – | – | – | Datasheet |
| PS-A-532 | 532 nm | 1 W | 1 kHz | <5%, <3% | <1.2 | – | – | – | <1.5 | – | Water cooled | 15-35 | RAD1PS | >10000 | – | – | – | – | 0.1-1 | duration, / high | – | – | – | Datasheet |
| PS-D-1064 | 1064 nm | 1-100 W | 400 kHz~120 MHz | <2%, <1% | <1.2 | – | ≥30 | TEM00 | <3 | >100:1 Horizontal (Vertical optional) | – | 20-30 | – | >10000 | – | – | – | 36V/40A | – | – | ~10 | Water cooled | – | Datasheet |
| PS-D-532-Water | 532 nm | 1-2000 mW | 80 MHz±1 | <3%, <2%, <1% | – | – | ≥30 | TEM00 | <2 | >100:1 Horizontal (Vertical optional) | – | 20-30 | – | – | ~10 | – | – | 36V/40A | – | – | – | Water cooled | <1.2 | Datasheet |
4.3 ΜM MID Infrared Laser， Solid State Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| HPL-MIR-4300 | 4300 nm | 1~2 W |
High Power Laser Diode Module |
27 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature（10 s max） | Fiber Cladding Diameter | Fiber Buffer Diameter | Lead Soldering Temperature (10 s max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-1064-100-2 | 1064 nm | 100 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-10-2 | 1064 nm | 10 W | - / 1.7 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
| LDM-1064-30-2 | 1064 nm | 30 W | - / 5 / - / V | 200 / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
| LDM-1064-976-808-2 | 1064 nm | 10/ 10 W/ 10 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1064-980-915-808-640-450-4 | 1064 nm | 15/ 15 W/ 15/ 15/ 0. 5/ 6 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-10-2 | 1470 nm | 10 W | 5.3 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | 220 | - / 500 / - / μm | – | Datasheet |
| LDM-1470-15-2 | 1470 nm | 15 W | 9.5 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | 220 | - / 500 / - / μm | – | Datasheet |
| LDM-1470-30-2 | 1470 nm | 30 W | - / 21.0 / 22.0 / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 10 / 40 | - / 75 / % | – | -20 / 80 | - / 90 / % | - / 250 / ℃ | 220 | 500 | – | Datasheet |
| LDM-1470-50-2 | 1470 nm | 50 W | - / 20.2 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | – | -20 / 80 / ℃ | - / 90 / % | - / 250 | 220 | – | – | Datasheet |
| LDM-1470-5-2 | 1470 nm | 5 W | - / 3.26 / - / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | - / 220 / - / μm | - / 500 / - / μm | – | Datasheet |
| LDM-1470-980-2 | 1470 nm | 30/ 30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-635-2 | 1470 nm | 15/ 15 W/ 0.2 | – | m | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1470-980-640-2 | 1470 nm | 15/ 18 W/ 0.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-1550-10-2 | 1550 nm | 10 W | - / 8.6 / - / V | - / 200 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
| LDM-1550-15-2 | 1550 nm | 15 W | 12 / V | 200 / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
| LDM-1940-15-2 | 1940 nm | 15 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-10-2 | 660 nm | 10 W | - / 16.5 / - / V | - / 200 / - / μm | 1-5 / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | - / 500 / - / μm | – | Datasheet |
| LDM-660-15-2 | 660 nm | 15 W | - / 18.6 / - / V | - / 200 / - / μm | 1-5 / m | – | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 220 / - / μm | - / 500 / - / μm | – | Datasheet |
| LDM-660-3-2 | 660 nm | 3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-6-2 | 660 nm | 6 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-8-2 | 660 nm | 8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-100-2 | 915 nm | 100 W | 12.25 / V | – | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
| LDM-915-150-4 | 915 nm | 150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-200-4 | 915 nm | 200 W | - / 22.4 / 25.0 / V | - / 400 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | – | - / 440 / - / μm | - / 700 / - / μm | - / 250 / ℃ | Datasheet |
| LDM-915-300-2 | 915 nm | 300 W | - / 29.7 / - / V | - / 200 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 220 / - / μm | 500 | – | Datasheet |
| LDM-915-30-2 | 915 nm | 30 W | 3.4 / V | - / 200 / - / μm | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
| LDM-915-50-2 | 915 nm | 50 W | - / 8.7 / - / V | - / 200 / - / μm | - / 1-5 / - / m | – | 15 / 35 | - / 75 / % | - / Water cooling（25℃） / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | Datasheet |
Long Coherence Length MDL C Series Diode Lasers |
2 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-C-514.5 | 514.5 nm | 1~20 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
| MDL-C-660 | 660 nm | 1~80 mW | <3%, <2%, <1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
Ultra Narrow Linewidth MDL E Series Diode Lasers |
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-E-514.5 | 514.5 nm | 1~20 mW | <0.06 nm, <0.03 | <3%, <2%, <1% | ~1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
| MDL-E-660 | 660 nm | 1~80 mW | <0.06 nm, <0.03 | <3%, <2%, <1% | ~1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
660 NM RED Diode Laser.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-HD-660 | 660 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660D | 660 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660L | 660 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660R | 660 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660-SM | 660 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, SMA905 optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-MD-660 | 660 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-660 | 660 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660D | 660 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660L | 660 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660-SM | 660 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | 1m | Datasheet |
| PGL-F-660 | 660 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-660 | 660 nm | 1~130 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
SM Fiber Coupled Laser |
6 models| Model | Wavelength | Output / average power | Power stability | M² | Spectral line width (nm) | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | machine vision, metrology, fiber optic | Noise of amplitude (rms, 20Hz-20MHz) | Fiber | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III-1550-SLD | 1550 nm | 1~8 mW | <2%, <1%, <0.5% | <1.5 | ~60 | Near TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | Datasheet |
| MDL-III-1550-SLD-SM | 1550 nm | 1~8 mW | <2%, <1%, <0.5% | 1.1 | ~60 | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | M2 after fiber / ~1.1 | – | – | Datasheet |
| MDL-III-514.5-SM | 514.5 nm | 1~10 mW | <2%, <1%, <0.5% | 1.1 | – | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, SMA905 optional | Metal, PVC optional | – | – | – | Datasheet |
| MDL-III-915-SM | 915 nm | 1~400 mW | <2%, <1%, <0.5% | 1.1 | – | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | – | – | – | Datasheet |
| MLL-III-514.5-SM | 514.5 nm | 1~10 mW | <2%, <1%, <0.5% | 1.1 | – | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | <1%, <0.5% | 1m | Datasheet |
| MLL-III-915-SM | 915 nm | 1~400 mW | <2%, <1%, <0.5% | 1.1 | – | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | – | <1%, <0.5% | – | Datasheet |
Nanosecond Pulse Diode Laser |
3 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Modulation Depth (extinction ratio) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Pulse width (FWHM) | Rep. | medical equipment manufacturing, etc. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III-P-1550 | 1550 nm | ~15.3 ( @6 kHz) | 1~6 kHz | ~150 ns ( @6 kHz) | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-1550 | 1550 nm | 1-10 mW | – | – | <2%, <1%, <0.5% | <1.5 | Near TEM00 | <3.0 | >1000000:1 | <5 | Conduction | 10-35 | 12V/3.34A | >10000 | – | – | – | Datasheet |
| MDL-NS-660 | 660 nm | 1~180 mW | – | – | <2%, <1%, <0.5% | <1.2 | – | <1.0 | – | <5 | Conduction | 10-35 | 12V/3.34A | >10000 | 10ns-10ms / 15ns-10ms | DC-30MHz / DC-30MHz | Modulation Depth (extinction ratio) / >1000000:1 | Datasheet |
Diode MDL XS Series Lasers |
1 model| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | monitoring, | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XS-660 | 660 nm | 1~80 mW | <2%, <1%, <0.5% | <1.2 | Near TEM00 | <1%, <0.5% | <1.0 | <5 | inspection | 10-35 | 12V/4A | AMOD (Analog) DC-100kHz | >10000 | Datasheet |
High Stability 532nm Laser |
18 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | Power supply | Expected lifetime (hours) | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Spectral linewidth (nm) | M2 | Polarization ratio | Power supply (100-240VAC) | Polarization (optional) | Fiber connector | Fiber length | Fiber Jacket | Modulation optional | Power supply (12VDC) | Warm-up Time (minutes) | Operating temperature(℃) | Power supply (90-264VAC) | Beam divergence (mrad) | Shock tolerance (6ms) | Fiber numerical aperture | Fiber type | Fiber jacket | Power supply (5VDC) | Pointing stability over temperature (μrad/°C) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-D-532 | 532 nm | 20~35 W | <1% | 10 | Near TEM00 | <1.5 | ~4.0 | Air Cooled | <20 | 10-35 | PSU-DEP-W | ＞10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-D-532-C | 532 nm | 45~75 W | <1% | <1.2 | TEM00 | <1.5 | – | Water cooled | – | – | – | >10000 | <10 | 10-35 | 36V/13.9A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-532 | 532 nm | 1.5~2.5 W | <1% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | <0.1 / <0.003 | <1.2,(<1.1 optional) | >100:1, Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-532-SM | 532 nm | 400~700 mW | <1% | <1.1 | TEM00 (single mode fiber output) | – | – | Air Cooled (Water Cooled optional) | – | 10-30 | – | ＞10000 | <10 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED | >50:1 after PM fiber | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532 | 532 nm | 1500~4000 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532-AOM | 532 nm | 150~2000 mW | <1% | – | – | – | <1.5 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA-AOM/PSU-H-LED-AOM | – | – | – | – | DC-1MHz;TTL or Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-III-532-AOM | 532 nm | 1~150 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | – | – | ＞10000 | – | – | – | – | – | >100:1, Vertical (Horizontal Optional) | – | – | – | – | – | DC-1MHz；TT or Analog optional | – | <5 | 10-35 | PSU-H-FDA-AOM/PSU-H-LED-AOM | – | – | – | – | – | – | – | – | Datasheet |
| MGL-K-532 | 532 nm | 1~30 W | <0.3% | <1 | TEM00 | ~1.0 | – | Air Cooled / Water Cooled / Conduction | <20 | 10-35 / 25 | – | >10000 | – | – | – | <0. 1 | <1. 1 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532 | 532 nm | 2.5~5 W | <1% | 3 | Near TEM00 | <1.5 | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | 3-5 | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532-AOM | 532 nm | 1~4 W | <1% | – | Near TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-W -LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-532 | 532 nm | 1~300 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | – | – | >10000 | <5 | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | <1.5 | 7g laterally, 15g vertically | – | – | – | – | – | – | Datasheet |
| MGL-S-532-SM | 532 nm | 1~150 mW | <0.5% | <1.1 | TEM00 (single mode fiber output) | – | – | – | – | 10-35 | – | >10000 | <10 | – | – | – | – | – | PSU-III-FDA/PSU-III-LED | >50:1 after PM fiber | FC/APC | 1m | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | 0.10-0.12 | SM fiber (PM fiber optional) | PVC (black) | PSU-A-F-OEM (5V/5A) | – | – | Datasheet |
| MGL-U-532 | 532 nm | 300~1500 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | <1.5 | – | – | – | – | – | <8 | – | Datasheet |
| MGL-U-532-SM | 532 nm | 1-400 mW | <1% | – | TEM00 (single mode fiber output) | – | – | – | – | 20-35 | – | >10000 | <10 | – | – | – | <1.1 | No / Polarization (>50:1 after PM fiber) | PSU-H-LED/PSU-H-FDA/PSU-SR | – | FC/APC | 1m (Other lengths can be customized) | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | – | 0.10-0.15 | SM fiber (PM fiber optional) | PVC (black) | – | – | – | Datasheet |
| MGL-V-532 | 532 nm | 1~10 W | <0.5% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MGL-V-532-SM | 532 nm | 700~5000 mW | <1% | – | TEM00 (single mode fiber output) | – | – | Air Cooled (Water Cooled optional) | – | 10-30 | – | ＞10000 | <10 | – | – | – | <1.1 | – | PSU-W-LED | >50:1 after PM fiber | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | SM fiber (PM fiber optional) | – | – | – | – | Datasheet |
| MGL-W-532A | 532 nm | 10~20 W | <1% | – | Near TEM00 | <2.0 | – | – | – | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-FDA/PSU-W-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-Z-532 | 532 nm | 30~60 W | <1% | – | Near TEM00 | <2.0 | ~5 | Air Cooled | – | 10-35 | – | >10000 | <10 | – | – | – | – | >1:1, Horizontal(Vertical optional) | PSU-SEP-W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
505 NM Green Laser, Diode Laser |
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MGL-U-505-SF | 505 nm | 1~200 mW |
THE Manufacturer High Stability 1064nm Laser
9 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Modulation optional | Beam divergence, full angle (mrad) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (℃) | Power supply (VDC) | (including polarization-maintaining, | M2 | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | Polarization (optional) | Power supply (36VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MIL-D-1064 | 1064 nm | 10~30 W | <1% | <1.3 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-H-1064 | 1064 nm | 1.5~3 W | <1% | <1.5 | TEM00 | <5 | – | >100:1, Horizontal (Vertical optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | ~1.2 | <2.0 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-N-1064 | 1064 nm | 4~5 W | <1% | <3.0 | Near TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-S-1064 | 1064 nm | 1~1500 mW | <0.5% | <1.2 | TEM00 | – | – | >100:1, Horizontal (Vertical optional) | – | – | PSU-A-D/PSU-A-F | >10000 | – | <1.7 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | <8 | 7g laterally,15g vertically | 10-35 | PSU-A-F-OEM (5V/5A) | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-S-1064-SM | 1064 nm | 1~1500 mW | <1% | – | TEM00 (single mode fiber output) | <10 | – | – | – | 10-35 | PSU-III-FDA/PSU-III-LED / PSU-SR | >10000 | – | – | – | – | – | – | – | PSU-A-F-OEM (5V/5A) / PSU-SR-OEM (12V/25A) | or PM, fiber) coupling, delivering high power | <1.2 | 0.10~0.12 | SM fiber (PM fiber optional) | FC/APC | PVC (black) | 1m | >50:1 after PM fiber | – | Datasheet |
| MIL-T-1064 | 1064 nm | 1~10 W | <1% | <1.2 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Air cooled | 10-35 | PSU-W-FDA/PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-T-1064-SM | 1064 nm | 1~5 W | <1% | – | TEM00 (single mode fiber output) | <10 | – | (optional) / >50:1 after PM fiber | Air Cooled | – | PSU-W-LED/ PSU-W-FDA | ＞10000 | – | – | – | – | – | – | 10-30 | – | – | <1.1 | 0.10-0.12 | SM fiber (PM fiber optional) | FCAPC | PVC | 1m (Other lengths can be customized) | – | – | Datasheet |
| MIL-U-1064-SU | 1064 nm | 3~4 W | <1% | <1.5 | TEM00 | <5 | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-SR | >10000 | ~1.0 | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MIL-Z-1064 | 1064 nm | 30~60 W | <1% | <1.3 | TEM00 | <10 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | Water cooled | 10-35 | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DRIVER (36V/13.8A) | Datasheet |
THE Manufacturer Miniature OEM Laser Module AT 1064nm
8 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MIL-S-1064-OEM | 1064 nm | 1~1500 mW | |
| PGL-FP-1064 | 1064 nm | 1~10 mW | |
| PGL-FS-1064 | 1064 nm | 1~500 mW | |
| PGL-H1-1064 | 1064 nm | 1~800 mW | |
| PGL-LF-1064 | 1064 nm | 1~10 mW | |
| PGL-V-H-1064 | 1064 nm | 1~800 mW | |
| PGL-V-H-FC-1064 | 1064 nm | 1~1000 mW | |
| S-1064-OEM | 1064 nm | 1~1500 mW |
355nm UV Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| Mini-E-PA-355/40uJ | 355 nm | 1000 mW |
THE Manufacturer LOW Noise 532nm Laser
9 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | printing, | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization (optional) | Fiber type | Fiber core diameter | Fiber connector | Fiber length | Fiber Jacket | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | M2 | Cooled method | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance(6ms) | Operating voltage (VAC) | Fiber numerical aperture | Fiber jacket | Power supply (12VDC) | Polarization ratio (optional) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1% | <1% | <1.1 | TEM00 | <1.2 | <10 | <20 | >100:1, Horizontal(Vertical optional) | chip | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-532-SM | 532 nm | 200~1000 mW | <0.1 nm | <3%, <2%, <1% | <1% | <1.2 | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-30 | PSU-H-FDA/ PSU-H-LED | ＞10000 | >50:1 after PM fiber | SM fiber (PM fiber optional) | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1%, <0.5% | <0.5% | – | TEM00 | <1.5 | <5 | – | – | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-532 | 532 nm | 1~30 W | <0.1 nm | <1%, <0.5%, <0.3%, <2% | <0.1%, <0.3% | <1 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 / 25 | – | >10000 | – | – | – | – | – | – | – | – | <1. 1 | Water Cooled / Conduction | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-532-SM | 532 nm | 1000~8000 mW | <0.1 nm | <2%, <1%, <0.5% | <0.2% | – | TEM00 (single mode fiber output) | – | <10 | – | (optional) / >50:1 after PM fiber | – | 10-30 | PSU-W-LED | ＞10000 | – | SM fiber (PM fiber optional) | 10um,0.10NA | FC/APC | 1m | Metal | – | – | <1.1 | Water Cooled | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-S-532 | 532 nm | 1~300 mW | <0.1 nm ( <0.003 @100 mW ) | <3%, <2%, <1%, <0.5% | <0.5% | <1.2 | TEM00 | <1.5 | <5 | – | >100:1, Horizontal (Vertical optional) | – | 10-35 | PSU-A-F | >10000 | – | – | – | – | – | – | – | – | <1.2, <1.1 | – | <1.0 | <8 | 7g laterally, 15g vertically | PSU-A-F (5V/5A) | – | – | – | – | – | Datasheet |
| MLL-U-532-SM | 532 nm | 1~200 mW | <0.003 nm | <3%, <2%, <1%, <5% | <1% | <1.1 | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-35 | PSU-H-FDA | >10000 | >50:1 after PM fiber | SM fiber (PM fiber optional) | – | FC/APC | 1m | – | – | – | – | – | – | – | – | – | 0.10-0.15 | PVC (black) | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MLL-V-532 | 532 nm | 1~15 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | <1.3 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | Water Cooled | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-532-SM | 532 nm | 1000~5000 mW | <0.1 nm | <3%, <2%, <1% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-30 | PSU-W-LED | ＞10000 | – | SM fiber (PM fiber optional) | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | <1.1 | Air Cooled (Water Cooled optional) | – | – | – | – | – | – | – | >50:1 after PM fiber | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
THE Manufacturer LOW Noise 1064nm Laser
5 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Cooled method | M2 | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance (6ms) | Operating temperature (℃) | Fiber numerical aperture | Fiber type | Fiber connector | Fiber jacket | Fiber length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-H-1064 | 1064 nm | 1500~3000 mW | <0.1 nm | <3%, <2%, <1% | <1% | <1.5 | TEM00 | <2.0 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-1064-OEM | 1064 nm | 20~40 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | – | TEM00 | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | <10 | 25 | – | – | >10000 | ~1 | <20 | Conduction | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-S-1064 | 1064 nm | 1~1500 mW | <0.1 nm | <2%, <1%, <0.5%, <3% | <1% | – | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | – | – | – | >10000 | – | – | – | <1.2 | <1.0 | <8 | 7g laterally, 15g vertically | 10-35 | – | – | – | – | – | Datasheet |
| MLL-T-1064 | 1064 nm | 1~10 W | <0.02 nm | <2%, <1%, <0.5% | <1% | <1.2 | TEM00 | – | >50:1(100:1 optional), Horizontal(Vertical optional) | <10 | 10-35 | PSU-W-FDA/PSU-W-LED | – | >10000 | – | <20 | Air cooled | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-T-1064-SM | 1064 nm | 1~7000 mW | <0.02 nm | <2%, <1% | <1% | <1.1 | TEM00 (single mode fiber output) | – | (optional) / >50:1 after PM fiber | <10 | – | PSU-W-LED/ PSU-W-FDA | – | ＞10000 | – | – | Air Cooled | – | – | – | – | 10-30 | 0.10-0.12 | SM fiber (PM fiber optional) | FCAPC | PVC | 1m (Other lengths can be customized) | Datasheet |
Ultra Compact, Narrow Linewidth U Serirs DPSS Lasers |
3 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Transverse mode | M2 | Polarization ratio | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Pointing stability over temperature (μrad/°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-1064-SU | 1064 nm | 1~3000 mW | <0.1 nm | – | <1% | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | – | – | – | Datasheet |
| MLL-U-457 | 457 nm | 1~350 mW | <0.003 nm (<0.1) | <3%, <2%, <1%, <0.5% | <1% | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <1.0 | <1.5 | <8 | Datasheet |
| MLL-U-532 | 532 nm | 1~1500 mW | <0.003 nm (<0.1) | – | <1%, (<0.5% @300-500 mW, optional) | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | <1.0 | <1.5 | <8 | Datasheet |
266nm UV CW Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MPL-Q1-266/10uJ | 266 nm | 10 mW |
607 NM Orange Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MRL-U-607-SF | 607 nm | 800~1800 mW |
MSL FN 720/1~100mW UP to 100 MW, 720 NM RED Single Longitudinal Mode Laser
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| MSL-FN-720 | 720 nm | 1~100 mW |
Compact Laser Module, Small Size Laser Modules |
1 model266nm UV Ultraviolet Laser.
1 model| Model | Wavelength | Output / average power | |
|---|---|---|---|
| PS-R-266 | 266 nm | 1~50 mW |
Fiber Coupling Multi Wavelength Laser |
21 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Polarization ratio | Fiber type | Fiber Core Diameter(μm) | Fiber NA | Fiber Connector | Fiber Length (m) | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | Noise of amplitude (rms, 20Hz~20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RGB-1053/1064 | 1053 nm | 200/200 mW | <1% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| RGB-1064/1310 | 1064 nm | 200/20 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC-PC/ FC-APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-1310/1550 | 1310 nm | 20/100 mW | <1% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| RGB-532/1064 | 532 nm | 100/200 mW | <1% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| RGB-532/640 | 532 nm | 50/50 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-532/640/1064 | 532 nm | 50/50/100 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-532/640/690 | 532 nm | 40/40/40 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-532/640/785/852 | 532 nm | 80/50/30/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-41 | 10000 | 1 year | – | Datasheet |
| RGB-532/785 | 532 nm | 50/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-561/640 | 561 nm | 20/50 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-561/785 | 561 nm | 20/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-577/633 | 577 nm | 20/20 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-577/640 | 577 nm | 20/50 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-577/785 | 577 nm | 20/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-589/633 | 589 nm | 20/20 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-589/634/1030 | 589 nm | 40/30/100 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-589/640 | 589 nm | 20/50 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-589/640/1030/1064 | 589 nm | 40/50/100/100 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-41 | 10000 | 1 year | – | Datasheet |
| RGB-589/785 | 589 nm | 20/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-633/785 | 633 nm | 20/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC-PC/ FC-APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-671/785 | 671 nm | 30/30 mW | <2% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | <1% | Datasheet |
Free Space Multi Wavelength Laser |
3 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Beam diameter at the aperture (mm) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | M2 factor | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RGB-473/589/685 | 473 nm | 20 mW | <1% | 1.1 | TEM00 | ~1.0 | <1.5 | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-532/633 | 532 nm | 20 mW | <1% | 1.1 | TEM00 | <2.0 | <1.0 | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-532/640/730 | 532 nm | 20 mW | <1% | – | TEM00 | ~1.0 | <1.5 | <5 | 10~35 | RGB-31 | 10000 | 1 year | ~1.1 | Datasheet |
DFB Laser |
6 models| Model | Wavelength | Output / average power | Power stability | M² | Spectral line width (MHz) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Spectral linewidth (MHz) | Operating temperature (℃) | Power supply (85-264VAC) | TTL / Analog modulation | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-F-1278DFB | 1278 nm | 1-10 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
| TEM-F-1368DFB | 1368 nm | 1-10 mW | <3%, <2%, <1%, <0.5% | <1.1 | – | – | <1.5 | <5 | – | – | 10000 | ~3 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| TEM-F-1512DFB | 1512 nm | 1-10 mW | <3%, <2%, <1%, <0.5% | <1.1 | – | – | <1.5 | <5 | – | – | 10000 | ~3 | 25+/-3 | PSU-III-LED / PSU-III-FDA | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | Datasheet |
| TEM-F-1567DFB | 1567 nm | 1-20 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
| TEM-F-1578DFB | 1578 nm | 1~20 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
| TEM-F-1579DFB | 1579 nm | 1~5 mW | <2%, <1%, <0.5% | <1.1 | ~3 | TEM00 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | – | – | – | – | Datasheet |
TEMoo Mode Diode Laser |
6 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-F-1550 | 1550 nm | 1~180 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-514.5 | 514 nm | 1~10 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-F-660 | 660 nm | 1~50 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-LN-1550 | 1550 nm | 1~180 mW | <2%, <1%, <0.5% | <1.1 | TEM00 | – | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-514.5 | 514 nm | 1~10 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
| TEM-LN-660 | 660 nm | 1~50 mW | <2%, <1%, <0.5% | – | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
Tunable Laser |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Beam divergence, full angle (mrad) | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| TUN-W-1480~1660 | 1480 nm | 1~2000 mW | <2 nm | <5%, <3% | <10 | Air Cooled | 15-35 | RAD1PS | >10000 | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.