Back to Home

Pulse energy, repetition rate, pulse width

EO-S-532-RS 532 nm green Q-switched pulsed laser

532 nm
  • EO-S-532-RS is a 532 nm actively electro-optic Q-switched DPSS laser for synchronized measurements.
  • Pulse energy: Up to 1 kHz: 1–150 μJ; 150 μJ at 1 kHz | Up to 20 kHz: 1–50 μJ; 50 μJ at 1 kHz, 12 μJ at 20 kHz
  • Output / average power: Up to 1 kHz: 1–150 mW | Up to 20 kHz: 1–450 mW
  • Pulse width: Up to 1 kHz: ~1.5 ns | Up to 20 kHz: ~1.3 ns at 1 kHz; ~1.9 ns at 20 kHz
  • Repetition rate: 1 Hz–20 kHz, depending on configuration
  • Operating mode: Actively electro-optic Q-switched
  • Timing jitter (external trigger, standard deviation): <2 ns standard; <0.2 ns optional

Specifications

EO-S-532-RS

21 specification rows

Wavelength (nm)532 ±1
Operating modeActively electro-optic Q-switched
Output / average powerUp to 1 kHz: 1–150 mW | Up to 20 kHz: 1–450 mW
Pulse energyUp to 1 kHz: 1–150 μJ; 150 μJ at 1 kHz | Up to 20 kHz: 1–50 μJ; 50 μJ at 1 kHz, 12 μJ at 20 kHz
Repetition rate1 Hz–20 kHz, depending on configuration
Pulse widthUp to 1 kHz: ~1.5 ns | Up to 20 kHz: ~1.3 ns at 1 kHz; ~1.9 ns at 20 kHz
Peak powerUp to 1 kHz: 0.6–100 kW | Up to 20 kHz: 0.7–38 kW
Timing jitter (external trigger, standard deviation)<2 ns standard; <0.2 ns optional
Power stability (rms, 4 h, ±3 °C)<5% / <3% / <2% / <1% options
Transverse modeTEM00
M²<1.5
Beam diameter at the aperture (1/e²)~1.0 mm
Beam divergence, full angle<1.5 mrad
Warm-up time<10 minutes
Beam height from base plate73 mm
Operating temperature10–35 °C
Power supplyPSU-EOM-DL; PSU-EOM-L optional for low-jitter operation.
AC input (configuration-dependent)90–264 VAC in the 532/1064 nm range specification; 100–240 VAC in the series datasheet. Confirm the input rating of the supplied power supply.
Expected lifetime>10000 hours
ApplicationsLaser ranging; lidar; Raman spectroscopy; ICP-MS; LIBS; scientific research.
Configuration notesPulse duration is not tunable; it varies with energy and repetition rate. Maximum power, pulse energy and frequency are not simultaneous guarantees.
EO-S-532-RS configurations · choose energy and repetition rate together
Model / wavelengthRepetition rateAverage powerPulse energyPulse durationPeak power
EO-S-532-RS532 nm1 Hz–1 kHz1–150 mW1–150 μJ; 150 μJ at 1 kHz~1.5 ns0.6–100 kW
EO-S-532-RS532 nm1–20 kHz1–450 mW1–50 μJ; 50 μJ at 1 kHz, 12 μJ at 20 kHz~1.3 ns at 1 kHz; ~1.9 ns at 20 kHz0.7–38 kW

Illustrative measurement

532 nm measurement example

These measured results illustrate a 532 nm example. They are not guaranteed specifications and do not describe every configuration or wavelength.

Beam profile
TEM00
M², X / Y
1.04 / 1.05
Pulse duration
1.121 ns
Timing jitter, standard deviation
101.4 ps in the example caption; 104.4 ps in the displayed trace

The jitter caption and trace readout differ; both are around 0.10 ns. Confirm the configuration, measurement conditions and acceptance limits for your system. The specified low-jitter option remains <0.2 ns with an external trigger, stated as a standard deviation.

What do you need?

  • Wavelength
  • Pulse energy at required repetition rate
  • Pulse duration
  • External-trigger jitter and fixed delay
  • Detector/camera timing
  • Beam delivery and power supply

Model selection

Nearby series comparison

Compare EO-S-532-RS with the closest available models in the Pulsed Lasers family.

Selection parameterEO-S-532-RS (current)FS-H-532AFS-H-532B
Wavelength532 nm532 nm532 nm
Optical power / pulse energyUp to 1 kHz: 1–150 mW | Up to 20 kHz: 1–450 mW1-100 mW100-2000 mW
Operating mode / pulse widthActively electro-optic Q-switchedPulsedPulsed
Beam quality<1.5<1.2<1.2