149 models · 21 series
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
13 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Free space output power (W) | Power stability (rms, 4 hours , ±3℃) | Transverse mode | Longitudinal mode | Current adjustment range | M2 | Beam diameter (mm) | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Fundamental Frequency | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time of warm boot(minutes) | Warm-up time of cold boot(hours) | Frequency shift (MHz) (over ±2°C and 8 hours) | Beam diameter at the aperture (1/e2 ,mm) | Pointing stability over temperature (µrad/°C) | Operating voltage (VDC) | Operating temperature (°C) | Storage temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-S-532-Brillouin | 532 nm | 1~150 mW | <1 MHz | – | <0.1% RIN(DC-20 MHz) | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-S-532 | 532 nm | 1~150 mW | <1 MHz | – | <0.2% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-S-532-D | 532 nm | 1~150 mW | <1 MHz | – | <0.2% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U- 532 | 532 nm | 1~1000 mW | <1 MHz | – | <0.25% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-R-532 | 532 nm | 1~15 W | <5 MHz | – | <0.1% optional | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FL-532-SLM | 532 nm | 1~3000 mW | <20 kHz | – | <0.05% RIN(DC-3 MHz) | <1.1 | 3-10 / 10-15 | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <1.1 / <1.2 | ~0.8 | <15 / <50 | >20 Horizontal (Vertical optional) | <30 | Water cooled | 15-30 | 110/220V | >10000 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-532-SLM-H | 532 nm | 3-15 W | <50 kHz | – | <0.1% RIN(DC-3 MHz) | <1.1 | 3-10 / 10-15 | <2%, <1%, <0.5% | TEM00 | SLM | 1-100% | <1.1 / <1.2 | ~0.8 | <15 / <50 | >20 Horizontal (Vertical optional) | <30 | Water cooled | 15-30 | 110/220V | >10000 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-532-SLM-E | 532 nm | 20-40 W | <50 kHz | – | <0.1% RIN(DC-3 MHz) | <1.2 | – | <2%, <1%, <0.5% | TEM00 | SLM | – | – | ~1.6 | <15 / <50 | – | – | Water cooled | 15-30 | 110/220VAC | >10000 | – | <1 | Vertical, >100:1 | <30 | <2 | – | – | – | – | – | – | Datasheet |
| MSL-AO-532 | 532 nm | – | – | – | Q-switched | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-U-532-Raman | 532 nm | 1~500 mW | <1 MHz | – | <0.2% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-III-532-AOM | 532 nm | 1~30 mW | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-FN-532-AOM | 532 nm | 30~800 mW | <1 MHz | <3%, <2%, <1% | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MSL-S-532-Raman | 532 nm | 1~150 mW | <1 MHz | <0.5% | <0.2% | <1.1 | – | – | TEM00 | Single | – | – | – | – | – | <5 | – | – | – | >10000 | – | <1.2 | >100:1, Horizontal (Vertical optional) | – | – | <±200 (<0.07cm-1) | <1.0 | <8 | 12V/3A | 15-35 | -10-50 | Datasheet |
Femtosecond Laser |
2 models| Model | Wavelength | Output / average power | Repetition rate | Single pulse energy (nJ) | Fiber | pulse | Warm-up time (minutes) | Transverse mode | M2 | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Pulse duration (fs) | Ave power stability (rms, 4 hours±3℃) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FS-H- 5 32A | 532 nm | 1-100 mW | 80±1 MHz | 1-1.25 | Femtosecond / pulsed / laser / at | Ave power stability (rms, 4 hours±3℃) / <2%, <1% | <10 | TEM00 | <1.2 | >100:1 Horizontal | Air cooled | 10-35 | 12V/6.67A | >10000 | – | – | Datasheet |
| FS-H- 5 32B | 532 nm | 100-2000 mW | 80±1 MHz | – | – | – | <10 | TEM00 | <1.2 | >100:1 Horizontal | Air cooled | 10-35 | RAD1PS | >10000 | <150 | <2%, <1% | Datasheet |
High Energy Laser |
25 models| Model | Wavelength | Pulse energy | Repetition rate | Pulse width | Power stability (rms, 4 hours , ±3℃) | M2 | Pointing stability over temperature (urad/℃) | Polarization | Beam diameter (mm) | Beam divergence, full angle (mrad) | Cooled method | Warm-up time (minutes) | Operating temperature (℃) | Relative humidity | Power supply (110/220VAC) | Expected lifetime (hours) | Power supply (24VDC) | pulse | Power supply | Expected lifetime(hours) | features of high single pulse energy, short | Average power (W) | energy | Operating voltage (VDC) | Fiber core diameter | Fiber connector | Fiber length(m) | Fiber Jacket | Jitter (ns, sdev) | Energy stability (std dev/mean) | Power supply (VDC) | Expected lifetime (pulses) | Pulse duration (ns) | high single pulse energy, high repetition rate, | Power stability (rms, 4 hours±3℃) | Power supply (220VAC) | of high single pulse energy, short pulse | Expected lifetime of lamp (pulses) | Pulse duration (ms) | Average power | Ave power stability (rms, 4 hours±3℃) | Transverse mode | Polarization ratio | Power supply (100-240VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EO-532-PS | 532 nm | 1-60 uJ | 1-1000 kHz | <15 ps | <5%, <3% | ≤1.4 | <50 | 100:1 | 1.5±0.5 | ≤2 | Water cooled | <15 | 15-30 | <60% | PSU-EO-PS | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-H M²<1.5 | 532 nm | 400-800 uJ | 1-10 kHz | <6 ns @5 kHz | <2%, <1% | <1.5 / <2 | <20 | – | ~1 | <3 | Conduction (EO-532-H-I) / Air cooled (EO-532-H-II) | <15 | -20-55 | – | – | >10000 | PSU-EO-H (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532- N | 532 nm | 100-800 uJ | 1 Hz-25 kHz | <6 ns @<5 kHz | <2%, <1% | <1.5 / <2 | <20 | – | ~1 | <3 | Air cooled or water cooled | <15 | 15-30 | – | – | >10000 | PSU-EO-N (24V/13A) | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532- G M²<1.2 | 532 nm | 10-1500 uJ | 1-100 kHz | <8 ns @5 kHz | <2%, <1% / <2%, <1% | – | <20 / <20 | – | ~1 / ~1 | <3 / <3 | Air cooled (EO-532-G-I)or Water cooled (EO-532-G-III)5 / Air cooled (EO-532-G-II) | <15 / <15 | 15-30 / 15-30 | – | – | >10000 | PSU-EO-G (24V/13A) / PSU-EO-G (24V/13A) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-P-Subnano | 532 nm | 1-500 uJ | 0.5-2 kHz | <1 ns | – | – | – | – | – | <3 | Air cooled / Water cooled | <15 | 15-30 | – | – | – | – | – | PSU-EO-P-Subnano (110/220VAC) / 24V/21A | 10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-Subnano | 532 nm | 1-500 uJ | 1-10 kHz | <1.5 ns @1 kHz | – | – | – | – | – | <3mrad | Air cooled | <15 | 15-30 | – | PSU-EO-Subnano | >10000h | – | – | – | – | Rep. rate / 1-10kHz (adjustable) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-Subnano-Hi | 532 nm | 1-2 mJ | 100 Hz-10 kHz | <1.5 ns @< 5 kHz | – | – | – | – | ~1.2mm / ~1.5mm | <3mrad | Air cooled or water cooled | <15 | 15-30 | – | – | >10000 | – | – | – | – | – | 50mW-5W / 5-10W | diode / pumped / all / solid | 24V/21A | 1mm, 0.22NA | SMA905 | 1 | Metal | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-D | 532 nm | 1-2 mJ | 1-5 kHz | <10 ns @5 kHz | – | <1.5 | – | – | ~1 | <3 | Water cooled | – | 15-30 | – | PSU-EO-D | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-E Narrow pulse width | 532 nm | 1-50 mJ | <4 Hz | – | – | – | – | – | ~1 | <3 | Conduction (DPS-532-E-I) / Air cooled (DPS-532-E-II) | <15 | 15-30 | – | – | – | – | energy, / short / pulse | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | <5%, <3% | PSU-DPS-E (24V/18.8 A) | 109 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-A | 532 nm | 1-10 mJ | <10 Hz | – | – | – | – | – | ~2.5 | – | Conduction cooled | <15 | 15-30 | – | PSU-DPS-A-I/PSU-DPS-A-II/PSU-DPS-A-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | <5%, <3% | – | 10 9 | <10 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-H M²<1.5 | 532 nm | 1-1000 mJ | <4 Hz | – | – | <1.5 | – | – | ~2.5 | <2 | Water cooled | – | 15-35 | – | PSU-DPS-H | – | – | – | – | – | – | – | diode / pumped / all / solid / state | – | – | – | – | – | <1ns (Int.) | – | – | 109 | <4 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-B | 532 nm | 1-10 mJ | <10 Hz | – | – | – | – | – | ~3 | ~1 | Air cooled | <15 | 15-30 | – | PSU-DPS-B | – | – | – | – | – | – | – | diode pumped / all / solid / state | – | – | – | – | – | <1ns (Int.) | – | – | 109 | <10 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-P-Subnano | 532 nm | 1-15 mJ | 1-100 Hz | <500 ps | – | – | – | – | – | <3 | Water cooled | <15 | 15-30 | – | PSU-DPS-Subnano | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <5%, <3% | – | 109 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-Q High rep.rate | 532 nm | 1-1000 mJ | ~10 Hz | – | – | – | – | – | ~2 / ~2.5 / ~3 / ~4 / ~2 | <2 | Water cooled | <15 | 15-35 | – | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | <5%, <3% | – | 109 | <12 / <12 / <12 / <10 / <10 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532- Neoma | 532 nm | 1-100 mJ | <12 Hz | – | – | – | – | – | ~3.5×3.5 | ≤8 | Air cooled | <15 | 15-35 | – | – | – | – | – | – | – | – | – | diode / pumped / all / solid / state | 48V/7.3A | – | – | – | – | <1ns (Int.) | – | – | 10 9 | <12 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-BS-D | 532 nm | 1-20 mJ | <10 Hz | – | – | – | – | – | ~5 | ≤3 | Air cooled | <15 | 15-30 | – | – | – | – | – | PSU-DPS-BS-D | – | – | – | diode / pumped / all / solid / state | – | – | – | – | – | <1ns (Int.) | – | – | 10 9 | <10 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532- G | 532 nm | 100 mJ | <10 Hz | – | – | – | – | – | ~7.5 | – | Water cooled | <15 | 15-35 | – | PSU-DPS-G | – | – | – | – | – | – | – | diode / pumped / all / solid / state | – | – | – | – | – | <1ns (Int.) | – | – | 109 | <10 | Beam divergence, full angle (mrad) / <3 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-PA | 532 nm | 200 mJ | ~10 @200 Hz | – | – | – | – | – | – | – | Water cooled | – | 15-35 | – | – | >10000 | – | – | – | – | – | 1-10 | – | – | – | – | – | – | – | – | – | – | ~10 | – | <5%, <3% | PSU-HPL-PA*3 | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-PB | 532 nm | 500 mJ | ~10 @500 Hz | – | – | – | – | – | – | – | Water cooled | – | 15-35 | – | – | >10000 | – | – | – | – | – | 1-25 | – | – | – | – | – | – | – | – | – | – | ~10 | – | <5%, <3% | PSU-HPL-PB*3 | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Subnano | 532 nm | 15-100 mJ | 1-10 Hz | <500 ps | – | – | – | – | ~7 | <3 | Water cooled | <15 | 15-30 | – | PSU-LPS-Subnano | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 107-108 | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-A | 532 nm | 1-10 mJ | ~10 Hz | – | – | – | – | – | <6 | – | Closed-loop liquid cooling | <15 | 20-25 | – | PSU-LPS-A(3U) | – | – | – | – | – | – | – | lamp / pumped / solid / state | – | – | – | – | – | <1ns (Int.) | – | – | – | <12 / <10 | – | – | – | Beam divergence, full angle (mrad) / ~1.5 / ~1.0 | 107-108 | – | – | – | – | – | – | Datasheet |
| LPS-532-S | 532 nm | 1-20 mJ | ~10 Hz | – | – | – | – | – | 5 | – | Water cooled | <15 | 15-35 | – | PSU-LPS-S | – | – | – | – | – | – | – | lamp / pumped / pulsed / laser / at | – | – | – | – | – | – | – | – | 107 | – | – | – | – | – | – | 0.9 | – | – | – | – | – | Datasheet |
| LPS-532-L | 532 nm | 1-10 mJ | ~10 Hz | – | – | – | – | – | 7 / 8 / 9 | – | Water cooled | <15 | 15-35 | – | PSU-LPS-L(3U) | – | – | – | – | – | – | – | lamp / pumped / solid / state | – | – | – | – | – | <1ns (Int.) | – | – | 107-108 | <10 / <10 / <8 | – | – | – | Beam divergence, full angle (mrad) / ~1 / ~1 / ~3 | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Q Small size | 532 nm | 1-10 mJ | <10 Hz | – | – | – | – | – | ~7 / ~9 | <3 | Water cooled | <15 | 15-35 | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | <1ns (Int.) | <3%, <2%, (<1% optional) | – | 107-108 | <10 | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| NS-FH-532 | 532 nm | 100 uJ | 0.2-10 MHz | 2-10 ns @1.5 MHz | – | <1.3 | – | – | – | <1 | Water cooled | <10 | 10-35 | – | – | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 1-30 | <2%, <1% | TEM00 | >100:1 Horizontal | RAD1PS | Datasheet |
High Power Laser |
3 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | Ave power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (220-240AC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HPL-532-Q | 532 nm | 20-30 W | 10-20 kHz | ~100 ns | – | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | Datasheet |
| HPL-532-QM | 532 nm | 30-100 W | 10-20 kHz | ~100 ns | – | – | – | – | – | – | – | – | Datasheet |
| HPL-532-QL | 532 nm | 100-200 W | 15 kHz | ~100 ns | <5%, <3% | – | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | Datasheet |
THE Manufacturer High Energy Q Switched Laser
46 models| Model | Wavelength | Output / average power | Pulse energy | Repetition rate | Pulse width | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Polarization ratio | Warm-up time (minutes) | Cooling method | Expected lifetime (hours) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Operating temperature | Operating voltage (VDC) | Operating temperature (℃) | Power supply (100-240VAC) | Beam diameter at the aperture 1/e2 (mm) | M2 | Jitter (ns, sdev) | Energy stability (std dev/mean) | pulse | Beam diameter (mm) | Power supply (VDC) | Expected lifetime (pulses) | energy | Power supply (110/220VAC) | of short pulse duration, high repetition rate | Pointing stability over temperature (urad/℃) | Power supply (24VDC) | Power supply | Jitter (ns, sdev) (optional) | Cooled | Beam diameter at the aperture (mm) | (Fan cooled) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-532 | 532 nm | 8-100 W | 600 uJ | 20-400 kHz | ~13 ns @60 kHz | <2%, <1% | <1.2 | TEM00 | <3.5 | >100:1 Vertical | <10 | Water cooled | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532A | 532 nm | 8/ 10 W | 260 uJ | 20-200 kHz | ~12 ns @30 kHz | <2%, <1% | <1.2 | TEM00 | ~3.5 | >100:1 Vertical | <10 | – | >10000 | ~0.8 | Air cooled | 10-35 | 12V/25A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532W-HE | 532 nm | 20 W | 2 mJ | 7-20 kHz | ~18 ns @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | – | >10000 | – | Water cooled | – | 24V/20.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-532W-LP | 532 nm | 20-30 W | 2-3 mJ | 6-20 kHz | ~100 ns @10 kHz~30 @10 kHz | <2%, <1% | <1.2 | TEM00 | <3 | >100:1 Vertical | <10 | – | >10000 | – | Water cooled | – | 24V/20.9A / 36V/13.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-L-532 | 532 nm | 1-3 W | 500-600 uJ | 1 Hz-10 kHz | 5-7 ns @5 kHz | <3%, <2%, <1% | – | – | ~4.5 | >100:1 Vertical | <10 | – | >10000 | – | Air Cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-Mini-E-532 | 532 nm | 1-5000 mW | 1-400 uJ | 1 Hz-100 kHz | ~7 ns @1 Hz-1 kHz | <2%, <1% | <1.2 | TEM00 | < 3 | >100:1 Horizontal | <10 | – | >10000 | – | Air cooled | – | 24V/14.5A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-532 | 532 nm | 1-250 mW | 1-100 uJ | 1 Hz-50 kHz | 5-10 ns @<10 kHz | <5%, <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-AOM-DL | ~1.2 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-S-532-H | 532 nm | 1-1000 mW | 1-250 uJ | 1 Hz-100 kHz | ~4.8 ns @10 kHz | <3%, <2%, <1% | – | TEM00 | – | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-AOM-DL | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-532 | 532 nm | 1-6 W | 1-600 uJ | 1-100 kHz | 30~100 ns can be customized @10 kHz | <2%, <1% | <1.1 | TEM00 | <3.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-T-532A | 532 nm | 2 W | 1 mJ | 2-8 kHz | ~23 ns @2 kHz | <2%, <1% | <1.2 | TEM00 | <3.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532 | 532 nm | 3000 mW & 400 | 500-1000 uJ & 60-80 uJ | 1-10 kHz | ~12 ns | <3%, <2%, <1% | <1.2 | – | <4.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | 10-35 | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-U-532-HE | 532 nm | 2/ 4 W | 2 mJ | 1 Hz-10 kHz | <10 ns @1 kHz | <2%, <1% | <1.2 | – | <4 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | – | 24V/20.9A | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-UA-532 | 532 nm | 300/ 2.5-3.5 W | 300~800 uJ | 1 Hz-10 kHz | ~10 ns @1 kHz~15 @5 kHz | <2%, <1% | <1.2 | – | ~3.5 | >100:1 Vertical | <10 | – | >10000 | – | Air cooled | 10-35 | – | – | PSU-AOM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| AO-X-532 | 532 nm | 1-20 W | 1-670 uJ | 30-100 kHz | ~15 ns @30 kHz | <5%, <3% | <2 | – | – | – | <10 | – | >10000 | – | Water cooled | – | – | 10-35 | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-E | 532 nm | 50-200 mW @50 Hz | 1-4 mJ | 1-50 Hz | <4 ns | – | – | – | <3 | – | <15 | – | – | – | Conduction (DPS-532-E-I) / Air cooled (DPS-532-E-II) | – | – | 15-30 | – | – | – | <1ns (Int.) | <5%, <3% | energy, / short / pulse | ~1 | PSU-DPS-E (24V/18.8 A) | 109 | – | – | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-H | 532 nm | 5-10 W @1000 Hz | 5-10 mJ | 1-1000 Hz | <4 ns | – | <1.5 | – | <2 | – | – | – | – | – | Water cooled | – | – | 15-35 | – | – | – | <1ns (Int.) | – | – | ~2.5 | – | 109 | diode / pumped / all / solid / state | PSU-DPS-H | – | – | – | – | – | – | – | – | Datasheet |
| DPS-532-Pico | 532 nm | 2-10 W @10 MHz | 0.2-1 uJ @10 MHz | 0.1-10 MHz | <50 ps | <3%, <2%, <1% | <1.5 | – | – | – | – | – | >10000 | – | Air cooled (DPS-532-Pico-I); Water cooled (DPS-532-Pico-II) | – | – | 15-30 | – | – | – | – | – | – | – | – | – | – | PSU-DPS-Pico | Beam diameter (mm) / ~2 | – | – | – | – | – | – | – | Datasheet |
| DPS-532-Q | 532 nm | 0.1-2 W @100 Hz | 1-20 mJ | 1-1000 Hz | ~10 ns | – | – | – | <2 | – | <15 | – | – | – | Water cooled | – | – | 15-35 | – | – | – | <1ns (Int.) | <5%, <3% | – | ~2 / ~2.5 / ~3 / ~4 / ~2 | – | 109 | – | PSU-DPS-Q-I/PSU-DPS-Q-II/PSU-DPS-Q-III | – | – | – | – | – | – | – | – | Datasheet |
| EO-532-G | 532 nm | 250-3750 mW @25 kHz | 10-1500 uJ @2 kHz | 1-100 kHz | <8 ns @5 kHz | <2%, <1% | <1 | – | <3 / <3 | – | <15 / <15 | – | >10000 | – | Air cooled (EO-532-G-I)or Water cooled (EO-532-G-III)5 / Air cooled (EO-532-G-II) | – | – | 15-30 / 15-30 | – | – | – | – | – | – | ~1 / ~1 | – | – | – | – | – | <20 / <20 | PSU-EO-G (24V/13A) / PSU-EO-G (24V/13A) | – | – | – | – | – | Datasheet |
| EO-532-H | 532 nm | 1.2-2.4 W @3 kHz | 0.4-0.8 mJ @3 kHz | 1-10 kHz (fixed) | <6 ns @5 kHz | <2%, <1% | <1.5 | – | <3 | – | – | – | >10000 | – | Conduction (EO-532-H-I) / Air cooled (EO-532-H-II) | – | – | -20-55 | – | – | <1.5 / <2 | – | – | – | ~1 | – | – | – | – | – | <20 | PSU-EO-H (24V/13A) | – | – | – | – | – | Datasheet |
| EO-HS-532 | 532 nm | 1-12 W | 1-200 uJ | 15-100 kHz | ~4 ns @50 kHz | <5%, <3% | 2 | – | <3 | – | <10 | – | >10000 | – | Water cooled | – | – | 10-35 | PSU-AOM (3U) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-LS-532 | 532 nm | 0.6-15 W | 0.3-2 mJ | 1-10 kHz | < 6 ns @10 kHz | <5%, <3% | 1.3 | – | <1.5 | – | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | 100-240VAC | – | – | – | – | Datasheet |
| EO-RS-532 | 532 nm | 1-35 W | 1-1.5 mJ | 20-100 kHz | 4 ns @50 kHz | <5%, <3% | – | – | <2 | – | – | – | >10000 | – | – | – | – | 10-35 | 24V/42A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-532 | 532 nm | 1-70 mW | 1-70 uJ | 1-1000 Hz | ~6 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | >10000 | – | – | – | – | 10-35 | PSU-EOM-DL | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-532-L | 532 nm | 1-50 mW | 1-50 uJ | 10 Hz-1 kHz | ~5 ns | <5%, <3%, <2%, <1% | <2 | TEM00 | – | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-EOM-L | ~1.5 | – | <0.2 (Ext) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| EO-S-532-RS | 532 nm | 1-150 mW @1 Hz-1 kHz 1-450 @1-20 kHz | 1-150 uJ @1 Hz-1 kHz 1-50 @1-20 kHz | 1 Hz-20 kHz | ~1.3 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | – | – | – | >10000 | – | – | – | – | 10-35 | PSU-EOM-DL/PSU-EOM-L (optional)5 | ~1.0 | – | – | – | – | – | – | – | – | – | – | – | – | – | <0.2 (Ext) | – | – | – | Datasheet |
| EO-XS-532 | 532 nm | 1-5 W | 1-125 uJ | 1-100 kHz | ~4 ns @40 kHz | <5%, <3% | – | – | <3 | – | <10 | – | >10000 | – | Air cooled | – | – | 10-35 | PSU-AOM (3U) | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LPS-532-Q | 532 nm | 1.5-5 W @10 Hz | 150-500 mJ | 1-10 Hz | <10 ns | – | – | – | <3 | – | <15 | – | – | – | Water cooled | – | – | 15-35 | – | – | – | <1ns (Int.) | <3%, <2%, (<1% optional) | – | ~7 / ~9 | – | 107-108 | – | PSU-LPS-Q(3U) | – | – | – | – | – | – | – | – | Datasheet |
| Mini-E-PC-532 | 532 nm | 150 mW | 50 uJ | 1-5 kHz | 6-10 ns | <3%, <2%, <1% | <1.2 | TEM00 | <3 | – | <15 | – | >10000 | – | – | – | 24V/ 8.4A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Conduction | – | – | Datasheet |
| MPL-H-532 | 532 nm | 100-150 mW | 10-30 uJ | 1 Hz-15 kHz | 3-5 ns | <5%, <3%, <2%, <1% | – | TEM00 | – | – | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~0.8 | – | Datasheet |
| MPL-H-532A | 532 nm | 30-150 mW | 5-30 uJ | 1 Hz-15 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | <1.5 | >100:1, Horizontal (Vertical optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-III-532 | 532 nm | 1-100 mW | 1-10 uJ | 1 Hz-15 kHz | 3-5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-III-532A | 532 nm | 1-30 mW | 1-5 uJ | 1 Hz-15 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-N-532 | 532 nm | 150-1500 mW | 60-125 uJ | 1-15 kHz | < 2/~5 ns | <5%, <3%, <2% | <1.5 | TEM00 | <2 | – | <10 | – | >10000 | – | – | – | – | 10-35 | PSU-N-FDA/PSU-N-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532A-HP | 532 nm | 100-1500 mW | 1-15 uJ | ~100 kHz | ~0.5 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled | – | – | 10-35 | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532B-HP | 532 nm | 60-900 mW | 1-20 uJ | ~40 kHz | ~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled | – | – | 10-35 | PSU-S-HP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532-HF | 532 nm | ~100 mW | ~1 uJ | ~100 kHz | ~0.5 ns | <3%, <2%, <1% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-S-532-HP | 532 nm | 80-400 mW/ 120-700 | 80-400 uJ/ 30-175 uJ | 1 Hz-1 kHz/ 1 kHz-4 kHz | 0.5/~0.7 ns | <5%, <3% | – | TEM00 | <1.5 | – | <5 | – | >10000 | – | Fan cooled / Water cooled | – | – | 10-35 | PSU-S-HP | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | (Water cooled) | Datasheet |
| MPL-S-532-LP | 532 nm | 40-80 mW | 40-80 uJ | 1 Hz-1 kHz | ~0.5 ns | <5%, <3%, <2% | <1.5 | TEM00 | – | – | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-S-LP | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-532 | 532 nm | 1-100 mW | 1-10 uJ | 1 Hz-15 kHz | 3-5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | – | – | – | – | – | PSU-III-OEM-97 (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-532A | 532 nm | 1-30 mW | 1-5 uJ | 1 Hz-15 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-III-FDA | – | <1.5 | – | – | – | – | PSU-III-OEM-97 (5V/5A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-T-532B | 532 nm | 1-3 mW | 1-5 uJ | 1 Hz-1 kHz | ~0.5 ns | <3%, <2%, <1% | <1.5 | TEM00 | – | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-532 | 532 nm | 150-500 mW | 30-60 uJ | 4 kHz-12 kHz | 3-5 ns | <3%, <2%, <1%, <5% | <1.3 | TEM00 | <1.5 | – | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | ~1.0 | – | Datasheet |
| MPL-U-532A | 532 nm | 150-500 mW | 30-60 uJ | 4 kHz-12 kHz | ~1.3 ns | <3%, <2%, <1% | – | TEM00 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-H-FDA/PSU-H-LED | – | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-532B | 532 nm | 3-40 mW/ 3-120 | 5-40 uJ/ 5-30 uJ | 1 Hz-1 kHz/ 1 kHz-4 kHz | ~0.5/~0.7 ns | <3%, <2%, <1% | <1.3 | TEM00 | <1.5 | >100:1, 45 degrees polarization | <5 | – | >10000 | – | – | – | – | 10-35 | PSU-SR | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MPL-U-532C | 532 nm | ~60 mW | ~1 uJ | ~40 kHz | ~0.5 ns | <3%, <2%, <1% | <1.3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
RGB Laser |
1 model| Model | Wavelength | Output / average power | Power stability | Fiber type | Fiber Core Diameter(μm) | Fiber Connector | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-532/640/808/1064-CH | 532 nm | 1/0.2/0.2/1 W | <1% | SM fiber | 4~9 | FC/APC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
Nanosecond Fiber Laser |
2 models| Model | Wavelength | Output / average power | Pulse width | Power stability | M² | Single pulse energy(nJ) | Energy stability (rms) | Pulsed width (ns) | lifetime, | Transverse mode | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | M2 | Rep. rate | Delivery fiber length (m) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-532-AO | 532 nm | 10-100 nJ | 0.5-50 ns | – | <1.2 | 10-100 | <3%, <2% | 0.5-5 / 5-50 | Rep. rate / 1-1000Hz (adjustable) | TEM00 | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | – | – | – | Datasheet |
| FL-532-Nano | 532 nm | 1 mW-20 W | 0.5-50 ns | <3%, <2% | <1.3 | – | – | – | – | – | >15 Horizontal (Vertical optional) | <15 | Air cooled | 15-35 | 12V/11.5A / 24V/21A | >10000 | <1.8 / <1.3 | 100kHz-1MHz / 20kHz-1MHz | 0.6 / 4 | Second harmonic | Datasheet |
LOW Noise Fiber Laser |
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Free space output power (W) | Transverse mode | Longitudinal mode | Current adjustment range | M2 | Beam diameter (mm) | Pointing stability (urad) | Polarization ratio (dB) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VAC) | Expected lifetime (hours) | Fundamental Frequency | Free space output power (mW) | Fiber coupled output power (mW) | Frequency shift (MHz) (over ±2℃and 8hours ) | Fiber connector | Fiber length(m) | Fiber jacket | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-532-LN-H | 532 nm | 3-10 W | <0.002 nm | <2%, <1% | <0.1% | 3-10 | TEM00 | SLM | 1-100% | <1.1 | ~1 | <15 / <50 | >20 Horizontal (Vertical optional) | <30 | Water cooled | 15-30 | 110/220V | >10000 | Second harmonic / WATER CHILLER (WCH-580) | – | – | – | – | – | – | Datasheet |
| FL-532-LN-L | 532 nm | 1-3000 mW | <0.002 nm | <2%, <1% | <0.05% | – | TEM00 | SLM | 1-100% | <1.1 | – | – | >15 Horizontal (Vertical optional) | <30 | Air cooled or Water cooled | 15-30 | 110/220V | >10000 | – | 1-3000 | 1-500 | <±200 | FC/APC | 1 | PVC, Metal optional | Datasheet |
Picosecond Fiber Laser |
2 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | M² | M2 | Polarization ratio (dB) | Delivery fiber length (cm) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | Fundamental Frequency | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-532-Pico | 532 nm | 1-1000 mW | 0.1-20 MHz | 100-900 ps | <5%, <3%, <2% | <1.5 | <1.5 / <2 | >15 Horizontal (Vertical optional) | 60 | Air cooled | 15-35 | 12V/11.5A | >10000 | Second harmonic | Datasheet |
| FL-532-PS | 532 nm | 1-150 mW | 20-60 MHz | <10 ps | <3%, <2% | <1.5 | – | >15 Horizontal (Vertical optional) | 60 | Air cooled | 15-35 | 12V/11.5A | >10000 | – | Datasheet |
Picosecond Diode Laser |
3 models| Model | Wavelength | Output / average power | Repetition rate | Power stability | M² | Pulse duration (ps) | Warm-up time (minutes) | Transverse mode | Polarization ratio | Cooled method | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Single pulse energy (mJ) | pulse | Beam divergence, full angle (mrad) | M2 | Cooling method | Operating voltage (VDC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FL-H-532-PS | 532 nm | 1-5000 mW | 20-120 MHz (Fixed) | <2%, <1% | <1.2 | <8ps; or one fixed value between 10 ps-150 ps | <10 | TEM00 | >100:1 Horizontal | Air cooled | 15-35 | 12V/6.67A | >10000 | – | – | – | – | – | – | Datasheet |
| PS-A-532 | 532 nm | 1 W | 1 kHz | <5%, <3% | <1.2 | – | – | – | – | Water cooled | 15-35 | RAD1PS | >10000 | 0.1-1 | duration, / high | <1.5 | – | – | – | Datasheet |
| PS-D-532-Water | 532 nm | 1-2000 mW | 80 MHz±1 | <3%, <2%, <1% | – | ~10 | ≥30 | TEM00 | >100:1 Horizontal (Vertical optional) | – | 20-30 | – | – | – | – | <2 | <1.2 | Water cooled | 36V/40A | Datasheet |
High Stability 532nm Laser |
18 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Beam divergence, full angle (mrad) | Beam diameter at the aperture (1/e2, mm) | Cooled method | Pointing Stability Over Temperature (urad/°C) | Operating temperature (°C) | Power supply | Expected lifetime (hours) | Warm-up time (minutes) | Operating temperature (℃) | Operating voltage (VDC) | Spectral linewidth (nm) | M2 | Polarization ratio | Power supply (100-240VAC) | Polarization (optional) | Fiber connector | Fiber length | Fiber Jacket | Modulation optional | Power supply (12VDC) | Warm-up Time (minutes) | Operating temperature(℃) | Power supply (90-264VAC) | Beam divergence (mrad) | Shock tolerance (6ms) | Fiber numerical aperture | Fiber type | Fiber jacket | Power supply (5VDC) | Pointing stability over temperature (μrad/°C) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-D-532 | 532 nm | 20~35 W | <1% | 10 | Near TEM00 | <1.5 | ~4.0 | Air Cooled | <20 | 10-35 | PSU-DEP-W | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-D-532-C | 532 nm | 45~75 W | <1% | <1.2 | TEM00 | <1.5 | – | Water cooled | – | – | – | >10000 | <10 | 10-35 | 36V/13.9A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-532 | 532 nm | 1.5~2.5 W | <1% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | <0.1 / <0.003 | <1.2,(<1.1 optional) | >100:1, Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-F-532-SM | 532 nm | 400~700 mW | <1% | <1.1 | TEM00 (single mode fiber output) | – | – | Air Cooled (Water Cooled optional) | – | 10-30 | – | >10000 | <10 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED | >50:1 after PM fiber | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532 | 532 nm | 1500~4000 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-FN-532-AOM | 532 nm | 150~2000 mW | <1% | – | – | – | <1.5 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA-AOM/PSU-H-LED-AOM | – | – | – | – | DC-1MHz;TTL or Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-III-532-AOM | 532 nm | 1~150 mW | <1% | <1.2 | TEM00 | <1.5 | – | – | – | – | – | >10000 | – | – | – | – | – | >100:1, Vertical (Horizontal Optional) | – | – | – | – | – | DC-1MHz; TT or Analog optional | – | <5 | 10-35 | PSU-H-FDA-AOM/PSU-H-LED-AOM | – | – | – | – | – | – | – | – | Datasheet |
| MGL-K-532 | 532 nm | 1~30 W | <0.3% | <1 | TEM00 | ~1.0 | – | Air Cooled / Water Cooled / Conduction | <20 | 10-35 / 25 | – | >10000 | – | – | – | <0. 1 | <1. 1 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532 | 532 nm | 2.5~5 W | <1% | 3 | Near TEM00 | <1.5 | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | 3-5 | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-N-532-AOM | 532 nm | 1~4 W | <1% | – | Near TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-W -LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-S-532 | 532 nm | 1~300 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | – | – | >10000 | <5 | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | <1.5 | 7g laterally, 15g vertically | – | – | – | – | – | – | Datasheet |
| MGL-S-532-SM | 532 nm | 1~150 mW | <0.5% | <1.1 | TEM00 (single mode fiber output) | – | – | – | – | 10-35 | – | >10000 | <10 | – | – | – | – | – | PSU-III-FDA/PSU-III-LED | >50:1 after PM fiber | FC/APC | 1m | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | – | – | – | – | – | – | 0.10-0.12 | SM fiber (PM fiber optional) | PVC (black) | PSU-A-F-OEM (5V/5A) | – | – | Datasheet |
| MGL-U-532 | 532 nm | 300~1500 mW | <0.5% | <1.2 | TEM00 | – | <1.0 | – | – | 10-35 | – | >10000 | <5 | – | – | – | – | – | PSU-H-FDA/PSU-H-LED/PSU-SR | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | PSU-SR-OEM (12V/25A) | – | – | – | <1.5 | – | – | – | – | – | <8 | – | Datasheet |
| MGL-U-532-SM | 532 nm | 1-400 mW | <1% | – | TEM00 (single mode fiber output) | – | – | – | – | 20-35 | – | >10000 | <10 | – | – | – | <1.1 | No / Polarization (>50:1 after PM fiber) | PSU-H-LED/PSU-H-FDA/PSU-SR | – | FC/APC | 1m (Other lengths can be customized) | – | – | PSU-SR-OEM (12V/25A) | – | – | – | – | – | 0.10-0.15 | SM fiber (PM fiber optional) | PVC (black) | – | – | – | Datasheet |
| MGL-V-532 | 532 nm | 1~10 W | <0.5% | <1.2 | TEM00 | – | – | – | <20 | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
| MGL-V-532-SM | 532 nm | 700~5000 mW | <1% | – | TEM00 (single mode fiber output) | – | – | Air Cooled (Water Cooled optional) | – | 10-30 | – | >10000 | <10 | – | – | – | <1.1 | – | PSU-W-LED | >50:1 after PM fiber | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | SM fiber (PM fiber optional) | – | – | – | – | Datasheet |
| MGL-W-532A | 532 nm | 10~20 W | <1% | – | Near TEM00 | <2.0 | – | – | – | 10-35 | – | >10000 | <10 | – | – | – | – | >50:1(>100:1 optional), Horizontal(Vertical optional) | PSU-W-FDA/PSU-W-LED | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MGL-Z-532 | 532 nm | 30~60 W | <1% | – | Near TEM00 | <2.0 | ~5 | Air Cooled | – | 10-35 | – | >10000 | <10 | – | – | – | – | >1:1, Horizontal(Vertical optional) | PSU-SEP-W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
THE Manufacturer LOW Noise 532nm Laser
9 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | printing, | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization (optional) | Fiber type | Fiber core diameter | Fiber connector | Fiber length | Fiber Jacket | Pointing stability over temperature (urad/°C) | Operating voltage (VDC) | M2 | Cooled method | Beam diameter at the aperture (1/e2, mm) | Pointing stability over temperature (μrad/°C) | Shock tolerance(6ms) | Operating voltage (VAC) | Fiber numerical aperture | Fiber jacket | Power supply (12VDC) | Polarization ratio (optional) | Modulation option | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-F-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1% | <1% | <1.1 | TEM00 | <1.2 | <10 | <20 | >100:1, Horizontal(Vertical optional) | chip | 10-35 | PSU-H-FDA/PSU-H-LED/PSU-H-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-532-SM | 532 nm | 200~1000 mW | <0.1 nm | <3%, <2%, <1% | <1% | <1.2 | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-30 | PSU-H-FDA/ PSU-H-LED | >10000 | >50:1 after PM fiber | SM fiber (PM fiber optional) | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-FN-532 | 532 nm | 1.5~2.5 W | <0.1 nm (<0.003 @1.5 W) | <3%, <2%, <1%, <0.5% | <0.5% | – | TEM00 | <1.5 | <5 | – | – | – | 10-35 | PSU-H-FDA | >10000 | – | – | – | – | – | – | <8 | PSU-SR-OEM (12V/25A) | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-532 | 532 nm | 1~30 W | <0.1 nm | <1%, <0.5%, <0.3%, <2% | <0.1%, <0.3% | <1 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 / 25 | – | >10000 | – | – | – | – | – | – | – | – | <1. 1 | Water Cooled / Conduction | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-K-532-SM | 532 nm | 1000~8000 mW | <0.1 nm | <2%, <1%, <0.5% | <0.2% | – | TEM00 (single mode fiber output) | – | <10 | – | (optional) / >50:1 after PM fiber | – | 10-30 | PSU-W-LED | >10000 | – | SM fiber (PM fiber optional) | 10um,0.10NA | FC/APC | 1m | Metal | – | – | <1.1 | Water Cooled | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-S-532 | 532 nm | 1~300 mW | <0.1 nm ( <0.003 @100 mW ) | <3%, <2%, <1%, <0.5% | <0.5% | <1.2 | TEM00 | <1.5 | <5 | – | >100:1, Horizontal (Vertical optional) | – | 10-35 | PSU-A-F | >10000 | – | – | – | – | – | – | – | – | <1.2, <1.1 | – | <1.0 | <8 | 7g laterally, 15g vertically | PSU-A-F (5V/5A) | – | – | – | – | – | Datasheet |
| MLL-U-532-SM | 532 nm | 1~200 mW | <0.003 nm | <3%, <2%, <1%, <5% | <1% | <1.1 | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-35 | PSU-H-FDA | >10000 | >50:1 after PM fiber | SM fiber (PM fiber optional) | – | FC/APC | 1m | – | – | – | – | – | – | – | – | – | 0.10-0.15 | PVC (black) | PSU-SR-OEM (12V/25A) | – | – | Datasheet |
| MLL-V-532 | 532 nm | 1~15 W | <0.1 nm | <2%, <1%, <0.5% | <0.5% | <1.3 | TEM00 | ~1.0 | – | <20 | >50:1(>100:1 optional), Horizontal(Vertical optional) | – | 10-35 | PSU-W-LED | >10000 | – | – | – | – | – | – | – | – | – | Water Cooled | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-V-532-SM | 532 nm | 1000~5000 mW | <0.1 nm | <3%, <2%, <1% | <1% | – | TEM00 (single mode fiber output) | – | <10 | – | – | – | 10-30 | PSU-W-LED | >10000 | – | SM fiber (PM fiber optional) | 3.5um,0.10NA | FC/APC | 1m | PVC, Metal optional | – | – | <1.1 | Air Cooled (Water Cooled optional) | – | – | – | – | – | – | – | >50:1 after PM fiber | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
Ultra Compact, Narrow Linewidth U Serirs DPSS Lasers |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Optical noise | Transverse mode | Beam diameter at the aperture (1/e2, mm) | Beam divergence (mrad) | Polarization ratio | Warm-up time (minutes) | Pointing stability over temperature (μrad/°C) | Operating temperature (°C) | Power supply (100-240VAC) | Power supply (12VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-U-532 | 532 nm | 1~1500 mW | <0.003 nm (<0.1) | <1%, (<0.5% @300-500 mW, optional) | TEM00 | <1.0 | <1.5 | >100:1, Vertical (Horizontal optional) | <5 | <8 | 10-35 | PSU-H-FDA | PSU-SR-OEM (12V/25A) | >10000 | Datasheet |
Ultra Compact OEM Laser,405 NM 1319 NM OEM Laser |
1 model| Model | Wavelength | Output / average power | Power stability | Transverse mode | Beam divergence, full angle (mrad) | Pointing Stability Over Temperature (urad/°C) | Polarization ratio | Power supply (12VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|
| OEM-I-532 | 532 nm | 1-5000 mW | <3%, <2%, (<1% optional) | Near TEM00 | ~1.0 | <20 | >50:1(100:1 optional), Horizontal(Vertical optional) | PSU-OEM-I / PSU-I-HS | >10000 | Datasheet |
Fiber Coupling Multi Wavelength Laser |
6 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Polarization ratio | Fiber type | Fiber Core Diameter(μm) | Fiber NA | Fiber Connector | Fiber Length (m) | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RGB-532/1064 | 532 nm | 100/200 mW | <1% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| RGB-532/640 | 532 nm | 50/50 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | Datasheet |
| RGB-532/640/1064 | 532 nm | 50/50/100 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | Datasheet |
| RGB-532/640/690 | 532 nm | 40/40/40 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | Datasheet |
| RGB-532/640/785/852 | 532 nm | 80/50/30/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-41 | 10000 | 1 year | Datasheet |
| RGB-532/785 | 532 nm | 50/30 mW | <1% | <1.1 | TEM00 (single mode fiber output) | Random (>30:1 after PM fiber optional) | SM fiber (PM fiber optional) | 4~9 | 0.10-0.15 | FC/APC | 1 (Other lengths are available on request) | PVC or metal jacket | <5 | 10~35 | RGB-31 | 10000 | 1 year | Datasheet |
Free Space Multi Wavelength Laser |
2 models| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Beam diameter at the aperture (mm) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Warranty | M2 factor | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RGB-532/633 | 532 nm | 20 mW | <1% | 1.1 | TEM00 | <2.0 | <1.0 | <5 | 10~35 | RGB-31 | 10000 | 1 year | – | Datasheet |
| RGB-532/640/730 | 532 nm | 20 mW | <1% | – | TEM00 | ~1.0 | <1.5 | <5 | 10~35 | RGB-31 | 10000 | 1 year | ~1.1 | Datasheet |
Lasers for Marking
3 models| Model | Wavelength | Output / average power | Transverse mode | Warm-up time (minutes) | Cooling method | Operating voltage (VDC) | Expected lifetime (hours) | Power stability (rms, 4 hours ± 3°C) | Polarization ratio | Rep. rate (kHz) | Cooled method | Operating temperature (℃) | Power supply (220/110VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AO-532B | 532 nm | 1~3 W | TEM00 | <10 | Air cooled | 12V/25A | >10000 | – | – | – | – | – | – | Datasheet |
| AO-532W | 532 nm | 8 W/ 10 W/ 20 W/ 40 W | TEM00 | – | Water cooled | – | >10000 | <2%, <1% | >100:1 Vertical | – | – | – | – | Datasheet |
| AO-V-532 | 532 nm | 5~8 W | TEM00 | <10 | – | – | – | – | – | 20~200 | Air cooled | 10~35 | PSU-AOM(3U) | Datasheet |
Fiber Coupling for Green/blue/red Laser to Make the Beam Even Distribution.
2 modelsLasers for Medical Treatment |
1 modelRGB Laser for Show,blue Laser,green Laser, RED Laser and Beam Combiner.
5 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Operating temperature (℃) | Expected lifetime (hours) | Warranty period | Transverse mode | TTL / Analog modulation | Warranty time | Warm-up time (minutes) | TTL modulation/ Analog modulation | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MGL-H-532 | 532 nm | 0.5~1.5 W | <5%, <10% | 10~35 | 10000 | 1 year | – | – | – | – | – | Datasheet |
| OEM-D-532 | 532 nm | 20~30 W | <3%, <5% | 22.5+/-2.5 | 10000 | – | Near TEM00 | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | 1 year | – | – | Datasheet |
| OEM-F-532 | 532 nm | 0.5~3 W | – | – | 5000 | – | Near TEM00 | – | 1 Year | <5 | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option | Datasheet |
| OEM-N-532 | 532 nm | 3~5 W | – | 22.5+/-2.5 | 10000 | 1 year | Near TEM00 | TTL or Analog with 1Hz-1kHz 1kHz-10kHz, 10kHz-30kHz optional | – | <10 | – | Datasheet |
| OEM-W-532 | 532 nm | 6~18 W | <3%, <5% | 22.5+/-2.5 | 10000 | – | – | – | 1 year | <10 | – | Datasheet |
Laser Sources for Raman, Fluorescence, LIBS Applicaion |
2 models| Model | Wavelength | Output / average power | Transverse mode | Longitudinal mode | Spectral line width (nm) | Noise of amplitude (rms, 1Hz~20MHz) | M2 factor | Polarization ratio | Warm-up time (minutes) | Pointing stability after warm-up (mrad) | Operating temperature (℃) | Power supply (90-264VAC) | Expected lifetime (hours) | Warranty | Spectral linewidth (nm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL-F-532 | 532 nm | 500~1000 mW | TEM00 | Single | <0.00001 | <1%, typical<0.5% | <1.5 | >100:1, Vertical±5 degree (Horizontal Optional) | <10 | <0.05 | 15~35 | PSU-H-FDA | 10000 | 1 year | – | Datasheet |
| MSL-FN-532 | 532 nm | 100~400 mW | TEM00 | Single | – | <0.5% | <1.2(<1.1 optional) | >100:1, Vertical±5 degree (Horizontal Optional) | <10 | <0.05 | 15~35 | PSU-H-FDA | 10000 | 1 year | <0.00001 | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.