Power stability, linewidth, beam quality
OEM-F-532 is a 532 nm CW laser. Key specifications: output / average power 0.5~3 W, transverse mode Near TEM00, operating mode CW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
11 specification rows
| Output / average power | 0.5~3 W |
|---|---|
| Transverse mode | Near TEM00 |
| Operating mode | CW |
| Warm-up time (minutes) | <5 |
| TTL modulation/ Analog modulation | TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz; and Analog modulation option |
| Expected lifetime (hours) | 5000 |
| Warranty time | 1 Year |
| Wavelength (nm) | 532±1 |
| Power stability (rms, over 4 hours) at 25℃ | <5%, 10% |
| Beam divergence, full angle (mrad) | <1.2 |
| Beam diameter at the aperture (mm) | 3-4 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
OEM-F-532: 532 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (Near TEM00) helps predict how the source will focus and propagate through the instrument.
OEM-F-532: Laboratory measurement benefits from a stable, focusable source. 532 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (Near TEM00) informs waist size and propagation.
System integration
Use these checks to connect OEM-F-532 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Transverse mode: Near TEM00 · Beam divergence, full angle (mrad): <1.2. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare OEM-F-532 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | OEM-F-532 (current) | HPL-532-PA | HPL-532-PB |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 0.5~3 W | 1~10 W | 1~25 W |
| Operating mode / pulse width | CW | Q-switched | Q-switched |
| Beam quality | Near TEM00 | <1 | <1 |
Compare the OEM-F-532 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide