Power stability, linewidth, beam quality
MLL-F-532532 nm green CW laser
532 nmMLL-F-532 is a 532 nm CW laser. Used for dna sequencing, flow cytometry, cell sorting, spectrum analysis. Fan cooling and heat sink; M² factor: <1.1; Spectral line width (nm ): <0.1 (<0.003 @1.5 W); M²: <1.1. Key specifications: output / average power 1.5~2.5 W, spectral linewidth <0.1 nm (<0.003 @1.5 W), power stability <3%, <2%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MLL-F-532
22 specification rows
| Output / average power | 1.5~2.5 W |
|---|---|
| Spectral linewidth | <0.1 nm (<0.003 @1.5 W) |
| Power stability | <3%, <2%, <1% |
| Optical noise | <1% |
| M² | <1.1 |
| Beam / notes | Fan cooling and heat sink; M² factor: <1.1; Spectral line width (nm ): <0.1 (<0.003 @1.5 W) |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.2 |
| Warm-up time (minutes) | <10 |
| Pointing Stability Over Temperature (urad/°C) | <20 |
| Polarization ratio | >100:1, Horizontal(Vertical optional) |
| printing, | chip |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED/PSU-H-OEM |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| Beam diameter at the aperture (1/e2, mm) | ~1.2 |
| Pointing Stability(urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 45 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Applications
Uses named on this model’s datasheet.
- DNA sequencing
- Flow cytometry
- Cell sorting
- Spectrum analysis
- Interference
- Measurement
- Holography
- Laser printing
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related cw lasers
Compare the MLL-F-532 with nearby cw lasers across the wavelength range.
