Technology guide
DPSS lasers: diode pumping and solid-state gain
Separate the pump diode, solid gain medium and any wavelength-conversion stage when specifying a DPSS source.
- 01Pump diode
- 02Solid gain medium
- 03Resonator
- 04Laser output
How it works
- A diode-pumped solid-state laser uses semiconductor pump light to excite a separate solid gain medium. The pump wavelength and output wavelength are therefore different roles.
- The resonator sustains laser oscillation in the solid medium. Its configuration controls mode behaviour together with the gain and optical alignment.
- Some output wavelengths use nonlinear frequency conversion after or inside the laser resonator. The output wavelength alone does not establish the crystal or conversion layout.
- Pump absorption and optical conversion generate heat. Cooling and warm-up requirements belong to the complete selected head and supply.
What to compare
| Parameter | Check in the specification |
|---|---|
| Operating mode | Distinguish CW output, modulation of CW light and an explicitly Q-switched or mode-locked source. |
| Beam quality | Compare transverse mode and M² under the specified power conditions. |
| Stability | Keep warm-up, averaging duration and temperature conditions with a power-stability figure. |
| Optical delivery | Confirm free-space versus fiber delivery and the compatible connector or collimator. |
Integration
- Ask for explicit gain-medium and frequency-conversion details only when they are documented for the exact model.
- Check head and power-supply drawings as separate assemblies.
- For a time-resolved experiment, specify pulse energy, duration and repetition rate together.
Related products
- UV-C-355
Head cooling: Water cooled.
- OEM-IR-2130
Head cooling: Water cooled.
- MIL-W-1105
Separate power supply: Power supply (90-264VAC): PSU-W-FDA.
References
Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.