Technology guide
Solid-state lasers: gain media and resonators
Recognise the gain, pump and feedback functions without inferring an undisclosed crystal or pump method.
- 01Pump energy
- 02Solid gain
- 03Resonator
- 04Output coupling
How it works
- A solid-state laser amplifies light in an active solid medium. The host, active species and optical transitions determine the available gain bands.
- A pump transfers energy into that medium. Diode pumping and lamp pumping are different implementations; a generic solid-state label does not select one.
- A resonator supplies feedback, while an output coupler lets part of the light leave for use in the experiment.
- CW operation, Q-switching and mode locking organise energy in time differently. They must be explicitly documented rather than inferred from output power or pulse duration.
What to compare
| Parameter | Check in the specification |
|---|---|
| Gain architecture | Look for an identified medium and pump method in the exact product documentation. |
| Spectral properties | Separate central wavelength, linewidth, tuning span and long-term drift. |
| Temporal properties | Compare output mode and pulse parameters under the stated operating conditions. |
| Thermal design | Check the head, supply and heat-removal interfaces as a complete system. |
Integration
- Start with wavelength, timing and beam-quality requirements before choosing a pumping architecture.
- Read internal wavelength-conversion claims separately from the gain-medium description.
- Compare the documented pumping and gain arrangements when narrowing the source choice.
Related products
- FC-515
Fiber interface: SMA905.
- MSL-Ti-CW-729
Head cooling: Water Cooled.
- MLL-K-1064-OEM
Separate power supply: Power supply (100-240VAC): PSU-AOM.
References
Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.