Back to Home

Technology guide

Lamp-pumped lasers: pumping, pulse energy and cooling

Match the lamp-pumped source to the required pulse sequence and heat-removal system.

  1. 01Lamp discharge
  2. 02Pump absorption
  3. 03Stored gain
  4. 04Laser pulse
Conceptual operating path.

How it works

  • A pump lamp illuminates a solid gain medium. The absorbed pump energy excites the medium before laser emission extracts part of that energy.
  • Lamp timing and resonator control are separate functions. A pulsed pump does not, by itself, identify Q-switching or a particular pulse duration.
  • The electrical lamp supply, laser head and cooling loop form an integrated system. Their limits must be considered together.
  • Heat loading, repetition rate and optical extraction influence steady operation. A single-pulse energy rating cannot be applied to an arbitrary pulse sequence.

What to compare

ParameterCheck in the specification
Pulse conditionsKeep energy, pulse width and repetition rate in the same operating specification.
Pump supplyConfirm trigger timing, electrical interfaces and supported repetition patterns.
CoolingCheck coolant requirements, flow monitoring and permitted warm-up conditions.
MaintenanceUse the manufacturer's lamp and optical-service procedures for the selected system.

Integration

  • Define burst structure and average duty as well as the largest pulse.
  • Confirm which chiller, lamp supply and interlocks are included.
  • Use an explicitly documented Q-switch description when linking a pulsed model to Q-switch timing requirements.

Related products

References

Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.