Fiber output, PM options, seed formats
MLL-V-532-SM532 nm green fiber laser
532 nmMLL-V-532-SM is a 532 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. SM Fiber; M² factor: <1.1; Spectral line width (nm ): <0.1. Key specifications: output / average power 1000~5000 mW, spectral linewidth <0.1 nm, power stability <3%, <2%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MLL-V-532-SM
24 specification rows
| Output / average power | 1000~5000 mW |
|---|---|
| Spectral linewidth | <0.1 nm |
| Power stability | <3%, <2%, <1% |
| Optical noise | <1% |
| Beam / notes | SM Fiber; M² factor: <1.1; Spectral line width (nm ): <0.1 |
| Operating mode | CW |
| Transverse mode | TEM00 (single mode fiber output) |
| M2 | <1.1 |
| Polarization ratio (optional) | >50:1 after PM fiber |
| Fiber type | SM fiber (PM fiber optional) |
| Fiber core diameter | 3.5um,0.10NA |
| Fiber connector | FC/APC |
| Fiber length | 1m |
| Fiber Jacket | PVC, Metal optional |
| Warm-up time (minutes) | <10 |
| Cooled method | Air Cooled (Water Cooled optional) |
| Operating temperature (°C) | 10-30 |
| Power supply (100-240VAC) | PSU-W-LED |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Expected lifetime (hours) | ＞10000 |
| Wavelength (nm) | 532±1 |
| Output power (mW) | 1000-5000 |
| M² | <1.1 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Optical lattices
- Atomic cooling
- Laser drilling
- Glass engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the MLL-V-532-SM with nearby fiber lasers across the wavelength range.
