Scientific research
FL-532-SLM: 532 nm emission determines compatible optics, coatings and detectors for Scientific research. The catalogued beam parameter (<1.1) helps predict how the source will focus and propagate through the instrument.
Fiber output, PM options, seed formats
FL-532-SLM532 nm green narrow-linewidth single-frequency fiber laser
532 nmFL-532-SLM is a 532 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. M²: <1.1. Key specifications: output / average power 1~3000 mW, spectral linewidth <20 kHz, optical noise <0.05% RIN(DC-3 MHz). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-532-SLM
22 specification rows
| Output / average power | 1~3000 mW |
|---|---|
| Spectral linewidth | <20 kHz |
| Optical noise | <0.05% RIN(DC-3 MHz) |
| M² | <1.1 |
| Operating mode | CW |
| Free space output power (W) | 3-10 / 10-15 |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| M2 | <1.1 / <1.2 |
| Beam diameter (mm) | ~0.8 |
| Pointing stability (urad) | <15 / <50 |
| Polarization ratio (dB) | >20 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Fundamental Frequency | Second harmonic / WATER CHILLER (WCH-580) |
| Wavelength (nm) | 532±1 |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Optical lattices
FL-532-SLM: 532 nm emission determines compatible optics, coatings and detectors for Optical lattices. The catalogued beam parameter (<1.1) helps predict how the source will focus and propagate through the instrument.
Atomic cooling
FL-532-SLM: 532 nm emission determines compatible optics, coatings and detectors for Atomic cooling. The catalogued beam parameter (<1.1) helps predict how the source will focus and propagate through the instrument.
Laser drilling
FL-532-SLM: 532 nm emission determines compatible optics, coatings and detectors for Laser drilling. The catalogued beam parameter (<1.1) helps predict how the source will focus and propagate through the instrument.
System integration
Integration and compatibility
Use these checks to connect FL-532-SLM to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Water cooled · Operating temperature (℃): 15-30
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- M²: <1.1 · Transverse mode: TEM00
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for FL-532-SLM
What cooling does the FL-532-SLM require?
Cooled method: Water cooled · Operating temperature (℃): 15-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the FL-532-SLM deliver?
M²: <1.1 · Transverse mode: TEM00. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-532-SLM with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FL-532-SLM (current) | FL-532-SLM-H | FL-532-SLM-E |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~3000 mW | 3-15 W | 20-40 W |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.1 | <1.1 | <1.2 |
Related fiber lasers
Compare the FL-532-SLM with nearby fiber lasers across the wavelength range.
