Technology guide
Laser specifications: architecture, beam and timing
Read a laser specification as one operating configuration, with architecture, output definitions and control conditions kept together.
- 01Laser architecture
- 02Output conditions
- 03Delivery optics
- 04Measurement
How it works
- Wavelength does not establish the gain medium, pump method or feedback arrangement. Look for an explicit architecture statement for the exact model.
- CW, pulsed output and externally modulated CW are different operating descriptions. A fast control input does not establish an ultrashort-pulse mechanism.
- Beam diameter depends on the stated intensity definition and measurement plane. Divergence can be full-angle or half-angle and can differ between axes.
- Spectral linewidth, transverse mode and single-frequency operation answer different questions and should be compared separately.
What to compare
| Parameter | Check in the specification |
|---|---|
| Power and energy | Keep average power, pulse energy, repetition rate and duration consistent. |
| Stability | Include warm-up, observation interval, ambient conditions and the statistic used. |
| Beam delivery | Account for polarization, coupling efficiency and losses between the head and experiment. |
| Control | Check separate fixed-output, adjustable and modulation-capable driver options. |
Integration
- Write down the output needed at the sample rather than only at the laser aperture.
- Read head and supply drawings together to plan mounting, cooling and cabling.
- Identify the gain architecture, cooling, delivery and driver configuration for the exact model.
Related products
- MDL-III-405
Laser head: Conduction-cooled head, 143.5 × 73 × 46.2 mm and 0.7 kg; specified operating range 10–35 °C.
- MLL-W-473-SM
Fiber interface: 3.5um,0.10NA.
- FC-780
Head cooling: Air cooled.
References
Discuss the configuration. Send the wavelength, output, pulse or CW mode and control requirements.