SLM, narrow linewidth, coherence
MSL-S-532-Raman 532 nm green narrow-linewidth single-frequency laser
532 nm- The MSL-S-532-Raman is a 532 nm continuous-wave solid-state laser.
- Output / average power: 1~150 mW
- Spectral linewidth: <1 MHz
- Operating mode: CW
Specifications
MSL-S-532-Raman
23 specification rows
| Output / average power | 1~150 mW |
|---|---|
| Spectral linewidth | <1 MHz |
| Power stability | <0.5% |
| M² | <1.1 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Frequency shift (MHz) (over ±2°C and 8 hours) | <±200 (<0.07cm-1) |
| Beam diameter at the aperture (1/e2,mm) | <1.0 |
| Beam divergence, full angle (mrad) | <1.2 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Pointing stability over temperature (µrad/°C) | <8 |
| Warm-up time (minutes) | <5 |
| Operating voltage (VDC) | 12V/3A |
| Operating temperature (°C) | 15-35 |
| Storage temperature (°C) | -10-50 |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±0.05 (air condition) |
| Wave number cut-off for raman spectrum (cm-1) | <5 |
| Spectral purity @±0.14nm (5cm-1) from the main peak | >60dB |
| Spectral purity @±1.4nm (50cm-1) from the main peak | >80dB |
| Noise of amplitude (rms, 20Hz-20MHz) | <0.2% |
| Pointing stability (µrad) (over 2 hours after warm-up and ±3°C) | <50 |
What do you need?
- Output power
- Linewidth
- Beam delivery (free-space or fibre)
Model selection
Nearby series comparison
Compare MSL-S-532-Raman with the closest available models in the Single-Frequency Lasers family.
| Selection parameter | MSL-S-532-Raman (current) | MSL-S-532-Brillouin | MSL-S-532 |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~150 mW | 1~150 mW | 1~150 mW |
| Operating mode / pulse width | CW | — | — |
| Beam quality | <1.1 | <1.1 | <1.2 |
Related single-frequency lasers
Compare the MSL-S-532-Raman with nearby single-frequency lasers across the wavelength range.

