Power stability, linewidth, beam quality
MGL-S-532 532 nm green CW laser
532 nm- The MGL-S-532 is a 532 nm continuous-wave diode-pumped solid-state laser.
- Output / average power: 1~300 mW
- Operating mode: CW
- Modulation optional: DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional
Specifications
MGL-S-532
23 specification rows
| Operating mode | CW |
|---|---|
| Output / average power | 1~300 mW |
| Power stability | <0.5% |
| M² | <1.2 |
| Beam / notes | Good seal IP67! Fan cooling and heat sink; M² factor: <1.1 |
| Transverse mode | TEM00 |
| Beam diameter at the aperture (1/e2, mm) | <1.0 |
| Beam divergence (mrad) | <1.5 |
| Warm-up time (minutes) | <5 |
| Shock tolerance (6ms) | 7g laterally, 15g vertically |
| Modulation optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Beam height from base plate (mm) | 19 |
| Power consumption (W) | <30 |
| Fiber (optional) | Multi mode/Single moode |
| Max. heat dissipation of head (W) | 4W@25°C |
| IP rating | IP65 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-A-F/ PSU-A-D |
What do you need?
- Output power
- Beam quality (M²)
- Beam delivery (free-space or fibre)
Model selection
Nearby series comparison
Compare MGL-S-532 with the closest available models in the CW Lasers family.
| Selection parameter | MGL-S-532 (current) | HPL-532-PA | HPL-532-PB |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~300 mW | 1–10 W at 200 Hz | 1–25 W at 500 Hz |
| Operating mode / pulse width | CW | Actively Q-switched | Actively Q-switched |
| Beam quality | <1.2 | <1 | <1 |
Related cw lasers
Compare the MGL-S-532 with nearby cw lasers across the wavelength range.


