Power stability, linewidth, beam quality
MGL-FN-532 532 nm green CW laser
532 nm- The MGL-FN-532 is a 532 nm continuous-wave diode-pumped solid-state laser.
- Output / average power: 1500~4000 mW
- Operating mode: CW
- Modulation optional: DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional
Specifications
MGL-FN-532
18 specification rows
| Operating mode | CW |
|---|---|
| Output / average power | 1500~4000 mW |
| Power stability | <1% |
| M² | <1.2 |
| Beam / notes | OEM, Fan cooling and heat sink; M² factor: <1.1 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 10-35 |
| Modulation optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED/PSU-SR |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Beam diameter at the aperture (1/e2, mm) | ~2.0 |
| Polarization Ratio | >100:1, Horizontal (Vertical optional) |
| Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Pointing Stability Over Temperature (μrad/°C) | <8 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
- Output power
- Beam quality (M²)
- Beam delivery (free-space or fibre)
Model selection
Nearby series comparison
Compare MGL-FN-532 with the closest available models in the CW Lasers family.
| Selection parameter | MGL-FN-532 (current) | HPL-532-PA | HPL-532-PB |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1500~4000 mW | 1–10 W at 200 Hz | 1–25 W at 500 Hz |
| Operating mode / pulse width | CW | Actively Q-switched | Actively Q-switched |
| Beam quality | <1.2 | <1 | <1 |
Related cw lasers
Compare the MGL-FN-532 with nearby cw lasers across the wavelength range.


