Power stability, linewidth, beam quality
MLL-S-532 532 nm green CW laser
532 nm- The MLL-S-532 is a 532 nm continuous-wave diode-pumped solid-state laser.
- Output / average power: 1~300 mW
- Spectral linewidth: <0.1 nm ( <0.003 @100 mW )
- Operating mode: CW
Specifications
MLL-S-532
23 specification rows
| Output / average power | 1~300 mW |
|---|---|
| Spectral linewidth | <0.1 nm ( <0.003 @100 mW ) |
| Power stability | <3%, <2%, <1%, <0.5% |
| M² | <1.2 |
| Beam / notes | Good seal IP67!; M² factor: <1.1; Spectral line width (nm ): <0.1 ( <0.003 @100 mW ) |
| Operating mode | CW |
| Transverse mode | TEM00 |
| M2 | <1.2, <1.1 |
| Beam diameter at the aperture (1/e2, mm) | <1.0 |
| Beam divergence, full angle (mrad) | <1.5 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Shock tolerance(6ms) | 7g laterally, 15g vertically |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-A-F |
| Operating voltage (VAC) | PSU-A-F (5V/5A) |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 532±1 |
| Noise of amplitude (rms, 20-20MHz) | <1%, <0.5% |
| Pointing Stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 19 |
| Laser head consumption (W) | <40 |
What do you need?
- Output power
- Beam quality (M²)
- Beam delivery (free-space or fibre)
Model selection
Nearby series comparison
Compare MLL-S-532 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-S-532 (current) | HPL-532-PA | HPL-532-PB |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~300 mW | 1–10 W at 200 Hz | 1–25 W at 500 Hz |
| Operating mode / pulse width | CW | Actively Q-switched | Actively Q-switched |
| Beam quality | <1.2 | <1 | <1 |
Related cw lasers
Compare the MLL-S-532 with nearby cw lasers across the wavelength range.


