41 models · 14 series
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
3 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Power stability (rms, 4 hours ± 3°C) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Expected lifetime (hours) | Transverse mode | Longitudinal mode | Pointing stability over temperature (urad/°C) | Frequency shift (MHz) (over ±2°C and 8hrs) (optional) | Operating temperature (°C) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 660 | 660 nm | 1~100 mW | <1 MHz | – | <0.5% | <1.2 | – | – | – | – | – | – | – | – | – | – | – | |
| MSL-III-660L | 660 nm | 1~40 mW | <50 MHz optional | – | <0.5% | <1.5 | <2%, <1%, <0.5% | <1.2 | <5 | 10-35 | PSU-III-FDA | >10000 | – | – | – | – | – | Datasheet |
| MSL-FN-660 | 660 nm | 1~100 mW | <1 MHz | <3%, <2%, <1%, <0.5% | <0.5% | <1.2 | – | – | <10 | – | PSU-H-FDA | >10000 | TEM00 | Single | <8 | <±200 | 10-35 | Datasheet |
High Power Laser |
3 models| Model | Wavelength | Output / average power | Repetition rate | Pulse width | Power stability | Single pulse energy (mJ) | Power stability (rms, 4 hours±3℃) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Power supply (220-240AC) | Expected lifetime (hours) | Pulse duration (ns) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 660 | 660 nm | 1-50 W | 5 kHz | – | – | – | – | – | – | – | – | – | – | – | |
| HPL-660-QM | 660 nm | 50-100 W | 10-20 kHz | ~150 ns | – | 10-20 | <5%, <3% | <3.5 | <10 | Water Cooled | 15-35 | PSU-HPL-Q*2 & PSU-HPL-CW*2 | >10000 | – | Datasheet |
| HPL-660-Q | 660 nm | 1-50 W | 5 kHz | – | <5%, <3% | 1-10 | – | <3.5 | <10 | Water Cooled | 15~35 | PSU-HPL-Q & PSU-HPL-CW | >10000 | ~150 | Datasheet |
660 NM RED Laser.
7 models| Model | Wavelength | Output / average power | |
|---|---|---|---|
| FC-660 | 660 nm | 1~360 mW | |
| MLL-FN-660 | 660 nm | 1~200 mW | |
| MRL-660(FC) | 660 nm | 1~1800 mW | |
| MRL-FN-660 | 660 nm | 1~500 mW | |
| MRL-W-660A | 660 nm | 500~2000 mW | |
| PS-L-660 | 660 nm | 1~100 mW | |
| PS-M-660 | 660 nm | 1~300 mW |
RGB Laser |
1 model| Model | Wavelength | Output / average power | Power stability | Fiber type | Fiber Core Diameter(μm) | Fiber Connector | Fiber jacket | Warm-up time (minutes) | Operating temperature (℃) | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-660/808-CH | 660 nm | 2/2 W | <1% | MM fiber | 400/ 200 | SMA905/ FC | PVC or metal jacket | <5 | 10~35 | 10000 | 1 year | Datasheet |
FC D Series Laser for Raman Spectroscopy |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | Fiber core diameter | Fiber connector | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-D-660 | 660 nm | 1~200 mW | 0.1 nm, (0.06 optional) | <3%, <2%, <1% | <1% | 100µm, 0.22 NA | SMA905, FC/PC optional | Metal, PVC optional | <5 | Air cooled | 20-30 | 5V/6A | >10000 | Datasheet |
Ultra Compact OEM Laser,405 NM 1319 NM OEM Laser |
2 models| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Fiber type | Fiber Core diameter | Fiber connector | Fiber length | Fiber jacket | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | Fiber Core Diameter (um) | Fiber Connector | Fiber lengths | Fiber Jacket | Operating temperature (℃) | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-OEM-660 | 660 nm | 80 mW | – | <2%, <1%, <0.5% | – | 1.1 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | 0.8m | 0.9mm PVC | <5 | Conduction | 10-35 | 5V | >10000 | – | – | – | – | – | – | Datasheet |
| YL-I-660 | 660 nm | 8 W | 2 nm | <2%, <1% | 0.5% | – | – | – | – | – | – | <5 | Air cooled | – | – | >10000 | 200, 400, 600, 0.22NA | SMA905, FC/PC optional | 1m | PVC, Metal optional | 0-30 | 100-240 | Datasheet |
High Power Laser Diode Module |
5 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Cladding Diameter | Fiber Buffer Diameter | Fiber Length | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-660-10-2 | 660 nm | 10 W | - / 16.5 / - / V | - / 200 / - / μm | - / 220 / - / μm | - / 500 / - / μm | 1-5 / m | 15 / 35 / ℃ | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | Datasheet |
| LDM-660-15-2 | 660 nm | 15 W | - / 18.6 / - / V | - / 200 / - / μm | - / 220 / - / μm | - / 500 / - / μm | 1-5 / m | 15 / 35 / ℃ | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | Datasheet |
| LDM-660-3-2 | 660 nm | 3 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-6-2 | 660 nm | 6 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-660-8-2 | 660 nm | 8 W | – | – | – | – | – | – | – | – | – | – | Datasheet |
Long Coherence Length MDL C Series Diode Lasers |
1 modelUltra Narrow Linewidth MDL E Series Diode Lasers |
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Power stability | Optical noise | M² | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-E-660 | 660 nm | 1~80 mW | <0.06 nm, <0.03 | <3%, <2%, <1% | ~1% | <1.5 | Near TEM00 | <5 | Conduction | 20-30 | PSU-A-D | >10000 | Datasheet |
660 NM RED Diode Laser.
12 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | M2 after fiber | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | Fiber length | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-HD-660 | 660 nm | 1.5~3 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660D | 660 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660L | 660 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660R | 660 nm | 1~200 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-III-660-SM | 660 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, SMA905 optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | Datasheet |
| MDL-MD-660 | 660 nm | 1~1500 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MDL-XD-660 | 660 nm | 3~4.5 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660D | 660 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660L | 660 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| MLL-III-660-SM | 660 nm | 1~80 mW | <2%, <1%, <0.5% | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | ~1.1 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | 1m | Datasheet |
| PGL-F-660 | 660 nm | 1~50 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-660 | 660 nm | 1~130 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – |
Nanosecond Pulse Diode Laser |
1 model| Model | Wavelength | Output / average power | Power stability | M² | Pulse width (FWHM) | Beam divergence, full angle (mrad) | Rep. | medical equipment manufacturing, etc. | Warm-up time (minutes) | Cooled method | Operating temperature (℃) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-NS-660 | 660 nm | 1~180 mW | <2%, <1%, <0.5% | <1.2 | 10ns-10ms / 15ns-10ms | <1.0 | DC-30MHz / DC-30MHz | Modulation Depth (extinction ratio) / >1000000:1 | <5 | Conduction | 10-35 | 12V/3.34A | >10000 | Datasheet |
Picosecond Diode Laser |
1 model| Model | Wavelength | Output / average power | Repetition rate | Power stability | Pulse width (ps) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Operating voltage (VDC) | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-PS-660 | 660 nm | 1~50 mW | 0.1~20 MHz | <3%, <2%, <1% | 100-1000 | Near TEM00 | ~1.0 | <5 | Air cooled | 10-35 | 12V/3.34A | >10000 | Datasheet |
Diode MDL XS Series Lasers |
1 model| Model | Wavelength | Output / average power | Power stability | M² | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | Beam divergence, full angle (mrad) | Warm-up time (minutes) | monitoring, | Operating temperature (℃) | Operating voltage (VDC) | Modulation option | Expected lifetime (hours) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-XS-660 | 660 nm | 1~80 mW | <2%, <1%, <0.5% | <1.2 | Near TEM00 | <1%, <0.5% | <1.0 | <5 | inspection | 10-35 | 12V/4A | AMOD (Analog) DC-100kHz | >10000 | Datasheet |
TEMoo Mode Diode Laser |
2 models| Model | Wavelength | Output / average power | Power stability | Transverse mode | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TEM-F-660 | 660 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | Datasheet |
| TEM-LN-660 | 660 nm | 1~50 mW | <2%, <1%, <0.5% | TEM00 | <1.1 | <1.5 | <5 | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.