6 models · 2 series
669nm RED Laser, Solid State Laser, DPSS RED Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Polarization Ratio | Operating Temperature (°C) | Modulation optional | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MLL-III-669 | 669 nm | 1~150 mW | <2%, <1%, <0.5% | Near TEM00 | <1%, <0.5% | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MDL-III-669 | 669 nm | 1~150 mW | <2%, <1%, <0.5% | – | – | <1.5 / <1.2 | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | Datasheet |
| MRL-FN-669 | 669 nm | 1~200 mW | – | TEM00 | – | – | – | <5 | – | – | PSU-H-FDA/ PSU-H-LED/ PSU-SR | >10000 | >100:1, Vertical (Horizontal Optional) | 10-35 | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional | Datasheet |
669nm RED Laser, Solid State Laser, DPSS RED Laser |
3 models| Model | Wavelength | Output / average power | Power stability (rms, over 4 hours) | Fiber NA | Fiber Connector | Fiber Length (m) | Warm-up time (minutes) | Operating temperature (℃) | Cooling way | Expected lifetime (hours) | Warranty | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FC-669 | 669 nm | 1~180 mW | <1%, <2%, <3%, <5% | 0.22 | SMA905 | 1 (Other lengths are available on request) | <5 | 10~35 | By air | 10000 | 1 year | Datasheet |
| MRL-669(FC) | 669 nm | 1~180 mW | – | – | – | – | – | – | – | – | – | |
| MRL-669(Line) | 669 nm | 1~200 mW | – | – | – | – | – | – | – | – | – |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.