Fiber output, PM options, seed formats
MGL-S-532-SM532 nm green fiber laser
532 nmMGL-S-532-SM is a 532 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. SM Fiber; M² factor: <1.1; M²: <1.1. Key specifications: operating mode CW, output / average power 1~150 mW, power stability <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MGL-S-532-SM
18 specification rows
| Operating mode | CW |
|---|---|
| Output / average power | 1~150 mW |
| Power stability | <0.5% |
| M² | <1.1 |
| Beam / notes | SM Fiber; M² factor: <1.1 |
| Transverse mode | TEM00 (single mode fiber output) |
| Fiber numerical aperture | 0.10-0.12 |
| Fiber type | SM fiber (PM fiber optional) |
| Fiber connector | FC/APC |
| Fiber jacket | PVC (black) |
| Fiber length | 1m |
| Polarization (optional) | >50:1 after PM fiber |
| Warm-up time (minutes) | <10 |
| Operating temperature (°C) | 10-35 |
| Modulation optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Power supply (100-240VAC) | PSU-III-FDA/PSU-III-LED |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Optical lattices
- Atomic cooling
- Laser drilling
- Glass engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the MGL-S-532-SM with nearby fiber lasers across the wavelength range.
