Pulse energy, repetition rate, pulse width
MPL-N-532532 nm green Q-switched pulsed laser
532 nmMPL-N-532 is a 532 nm Pulsed laser. Used for marking on highly reflective metals, semiconductors, carbide, rubbers. M²: <1.5. Key specifications: operating mode Passively Q-switched, output / average power 150-1500 mW, pulse energy 60-125 uJ. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MPL-N-532
18 specification rows
| Wavelength | 532 nm |
|---|---|
| Operating mode | Passively Q-switched |
| Output / average power | 150-1500 mW |
| Pulse energy | 60-125 uJ |
| Repetition rate | 1-15 kHz |
| Pulse width | < 2/~5 ns |
| Power stability | <5%, <3%, <2% |
| M² | <1.5 |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <2 |
| Warm-up time (minutes) | <10 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-N-FDA/PSU-N-LED |
| Expected lifetime (hours) | >10000 |
| Average power (mW) | 150-1500 |
| Single pulse energy (µJ) | 60-125 |
| QCW | QCW state with one rep. rate between 1-15kHz |
| Beam diameter at the aperture (1/e2, mm) | ~1.5 |
| Beam height from base plate (mm) | 68.4 |
Applications
Uses named on this model’s datasheet.
- Marking on highly reflective metals
- Semiconductors
- Carbide
- Rubbers
- Ceramics
- Composites
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the MPL-N-532 with nearby pulsed lasers across the wavelength range.
