Fiber output, PM options, seed formats
FL-H-532-PS532 nm green mode-locked fiber laser
532 nmFL-H-532-PS is a 532 nm Fiber laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. Rep. Rate (MHz): 20-120 (Fixed); M²: <1.2. Key specifications: operating mode Mode-locked, output / average power 1-5000 mW, repetition rate 20-120 MHz (Fixed). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-H-532-PS
23 specification rows
| Operating mode | Mode-locked |
|---|---|
| Output / average power | 1-5000 mW |
| Repetition rate | 20-120 MHz (Fixed) |
| Power stability | <2%, <1% |
| M² | <1.2 |
| Beam / notes | Rep. Rate (MHz): 20-120 (Fixed) |
| Pulse duration (ps) | <8ps; or one fixed value between 10 ps-150 ps |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| Polarization ratio | >100:1 Horizontal |
| Cooled method | Air cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | 12V/6.67A |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Average power (W) | 1-5 |
| Single pulse energy (nJ) | 62.5 (62.5nJ @80MHz)；125 (125nJ @40MHz) |
| Rep. rate (MHz) | 20-120 |
| Peak power (kW) | 6.25kW @80MHz/10ps; 12.5kW@40MHz/10ps |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | ~2 |
| Beam height from base plate (mm) | 118 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-H-532-PS with nearby fiber lasers across the wavelength range.
