Power stability, linewidth, beam quality
MLL-FN-532532 nm green CW laser
532 nmThe MLL-FN-532 is a precision 532 nm CW laser delivering 1.5~2.5 W output power, with <3%, <2%, <1%, <0.5% power stability, TEM00 beam quality. View technical specifications, download the datasheet, and request configuration options from Precisometer.
Specifications
MLL-FN-532
20 specification rows
| Output / average power | 1.5~2.5 W |
|---|---|
| Spectral linewidth | <0.1 nm (<0.003 @1.5 W) |
| Power stability | <3%, <2%, <1%, <0.5% |
| Beam / notes | M² factor: <1.2, <1.1; Spectral line width (nm ): <0.1 (<0.003 @1.5 W) |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.5 |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (urad/°C) | <8 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Operating voltage (VDC) | PSU-SR-OEM (12V/25A) |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| M² | <1.2, <1.1 |
| Beam diameter at the aperture (1/e2, mm) | <2.0 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Pointing stability (urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-FN-532 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-FN-532 (current) | HPL-532-PA | HPL-532-PB |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1.5~2.5 W | 1~10 W | 1~25 W |
| Operating mode / pulse width | CW | Q-switched | Q-switched |
| Beam quality | <1.2, <1.1 | <1 | <1 |
Related cw lasers
Compare the MLL-FN-532 with nearby cw lasers across the wavelength range.
