Power stability, linewidth, beam quality
MLL-K-532 532 nm green high-power CW laser
532 nm- The MLL-K-532 is a 532 nm continuous-wave diode-pumped solid-state laser.
- Output / average power: 1~30 W
- Spectral linewidth: <0.1 nm
- Operating mode: CW
- Modulation option: DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional
Specifications
MLL-K-532
19 specification rows
| Output / average power | 1~30 W |
|---|---|
| Spectral linewidth | <0.1 nm |
| Power stability | <1%, <0.5%, <0.3%, <2% |
| M² | <1 |
| Beam / notes | M² factor: <1.1; Spectral line width (nm ): <0.1 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| M2 | <1. 1 |
| Beam divergence, full angle (mrad) | ~1.0 |
| Pointing Stability Over Temperature (urad/°C) | <20 |
| Polarization ratio | >50:1(>100:1 optional), Horizontal(Vertical optional) |
| Cooled method | Water Cooled / Conduction |
| Operating temperature (°C) | 10-35 / 25 |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Beam diameter at the aperture (1/e2, mm) | ~2.0 |
| Warm-up time (minutes) | <10 |
| Pointing Stability(urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
What do you need?
- Output power
- Beam quality (M²)
- Beam delivery (free-space or fibre)
Model selection
Nearby series comparison
Compare MLL-K-532 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-K-532 (current) | HPL-532-PA | HPL-532-PB |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~30 W | 1–10 W at 200 Hz | 1–25 W at 500 Hz |
| Operating mode / pulse width | CW | Actively Q-switched | Actively Q-switched |
| Beam quality | <1 | <1 | <1 |
Related cw lasers
Compare the MLL-K-532 with nearby cw lasers across the wavelength range.


