Optical instrumentation
LPS-L-532: 532 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Pulse energy, repetition rate, pulse width
LPS-L-532532 nm green Q-switched pulsed laser
532 nmLPS-L-532 is a 532 nm Pulsed laser. Key specifications: pulse energy 1~450 mJ, repetition rate 1~10 Hz, operating mode Q-switched: EOM (Electro-optic modulation). View specifications, datasheet and enquiry options from Precisometer.
Specifications
LPS-L-532
14 specification rows
| Pulse energy | 1~450 mJ |
|---|---|
| Repetition rate | 1~10 Hz |
| Operating mode | Q-switched: EOM (Electro-optic modulation) |
| Energy stability | <4% |
| Cooled method | Water Cooled |
| Operating temperature (℃) | 15~35 |
| Power supply (220/110VAC) | PSU-LPS-L(3U) |
| Expected lifetime (pulses) | 107~108 |
| Warranty period | 1 year |
| Wavelength (nm) | 532±1 |
| Rep. rate (Hz) | 1~10 (adjustable) |
| Warm-up time (minutes) | <15 |
| Beam height from base plate (mm) | 80 |
| Available Options | Higher repetition rates:≤20Hz; Jitter :~1ns（Sdev）; Accessories |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
LPS-L-532: Laboratory measurement benefits from a stable, focusable source. 532 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
System integration
Integration and compatibility
Use these checks to connect LPS-L-532 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Cooled method: Water Cooled · Operating temperature (℃): 15~35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Technical FAQ
Integration questions for LPS-L-532
What cooling does the LPS-L-532 require?
Cooled method: Water Cooled · Operating temperature (℃): 15~35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare LPS-L-532 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | LPS-L-532 (current) | FS-H- 5 32A | FS-H- 5 32B |
|---|---|---|---|
| Wavelength | 532 nm | 532 nm | 532 nm |
| Optical power / pulse energy | 1~450 mJ | 1-100 mW | 100-2000 mW |
| Operating mode / pulse width | 1~10 Hz | Pulsed | Pulsed |
| Beam quality | Confirm for this model | TEM00 | TEM00 |
Related pulsed lasers
Compare the LPS-L-532 with nearby pulsed lasers across the wavelength range.
