Pulse energy, repetition rate, pulse width
AO-T-532A532 nm green Q-switched pulsed laser
532 nmAO-T-532A is a 532 nm Pulsed laser. Used for acrylic engraving applications. M²: <1.2. Key specifications: operating mode Actively Q-switched, output / average power 2 W, pulse energy 1 mJ. View specifications, datasheet and enquiry options from Precisometer.
Specifications
AO-T-532A
23 specification rows
| Operating mode | Actively Q-switched |
|---|---|
| Output / average power | 2 W |
| Pulse energy | 1 mJ |
| Repetition rate | 2-8 kHz |
| Pulse width | ~23 ns @2 kHz |
| Power stability | <2%, <1% |
| M² | <1.2 |
| Beam divergence, full angle (mrad) | <3.5 |
| Transverse mode | TEM00 |
| Polarization ratio | >100:1 Vertical |
| Warm-up time (minutes) | <10 |
| Cooled method | Air cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-AOM |
| Expected lifetime (hours) | ＞10000 |
| Wavelength (nm) | 532±1 |
| Average power (W) | 2@2kHz |
| Single pulse energy (mJ) | >1@2kHz |
| Rep. rate | 2~8kHz |
| Pulse duration (ns) | ~23@2kHz |
| Peak power (kW) | 43@2kHz |
| Beam diameter at the aperture (1/e2, mm) | ~0.8 |
| Beam height from base plate (mm) | 109.75 |
Applications
Uses named on this model’s datasheet.
- Acrylic engraving applications
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the AO-T-532A with nearby pulsed lasers across the wavelength range.
