Back to Home

Power stability, linewidth, beam quality

TEM-F-1579DFB1579 nm infrared CW laser

1579 nm

TEM-F-1579DFB is a 1579 nm CW laser. Used for measurement, communication, spectrum analysis. M²: <1.1. Key specifications: output / average power 1~5 mW, power stability <2%, <1%, <0.5%, m² <1.1. View specifications, datasheet and enquiry options from Precisometer.

Specifications

TEM-F-1579DFB

18 specification rows

Output / average power1~5 mW
Power stability<2%, <1%, <0.5%
<1.1
Operating modeCW
Spectral line width (MHz)~3
Transverse modeTEM00
Beam divergence, full angle (mrad)<1.5
Warm-up time (minutes)<5
Operating temperature (°C)25±3
Power supply (100-240VAC)PSU-III-FDA/PSU-III-LED/PSU-A-D
Expected lifetime (hours)>10000
Central wavelength (nm)1579±2
SMSR (dB)35
Output power (mW)1-5
Ellipticity>0.95
Beam diameter at the aperture (1/e2, mm)~1.0
Beam height from base plate (mm)25
Modulation optionDC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional

Application context

Why this design is used

Applications named on this model’s datasheet, expanded with the model’s optical specifications.

Measurement

TEM-F-1579DFB: Measurement benefits from a stable, focusable source. 1579 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<1.1) informs waist size and propagation.

Communication

TEM-F-1579DFB: 1579 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.

Spectrum analysis

TEM-F-1579DFB: 1579 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line. The listed beam characteristic (<1.1) also controls focusing and collection geometry.

System integration

Integration and compatibility

Use these checks to connect TEM-F-1579DFB to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Thermal management
Operating temperature (°C): 25±3
Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Beam parameters at the output
M²: <1.1 · Transverse mode: TEM00
Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.

Technical FAQ

Integration questions for TEM-F-1579DFB

What cooling does the TEM-F-1579DFB require?

Operating temperature (°C): 25±3. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.

What beam does the TEM-F-1579DFB deliver?

M²: <1.1 · Transverse mode: TEM00. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.

Need this configured?

Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.

Open laser selector

Model selection

Nearby series comparison

Compare TEM-F-1579DFB with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.

Selection parameterTEM-F-1579DFB (current)MLL-III-1580-SMMIL-1580(FC)
Wavelength1579 nm1580 nm1580 nm
Optical power / pulse energy1~5 mW1~15 mW1~20 mW
Operating mode / pulse widthCWConfirm for this modelConfirm for this model
Beam quality<1.1Confirm for this modelConfirm for this model