Fiber output, PM options, seed formats
MBL-W-473-SM is a 473 nm Fiber laser. Used for medical imaging, flow cytometry, dna sequencing, measurement. Features: SM Fiber. Key specifications: output / average power 50~1000 mW, spectral linewidth < 0.1 nm, power stability <2%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
23 specification rows
| Output / average power | 50~1000 mW |
|---|---|
| Spectral linewidth | < 0.1 nm |
| Power stability | <2% |
| Beam / notes | Features: SM Fiber |
| Operating mode | CW |
| Transverse mode | TEM00 (single mode fiber output) |
| M2 | <1.1 |
| Polarization (optional) | >50:1 after PM fiber |
| Fiber type | SM fiber (PM fiber optional) |
| Fiber connector | FC/APC |
| Fiber length | 1m |
| Fiber Jacket | PVC, Metal optional |
| Warm-up time (minutes) | <10 |
| Cooled method | Air cooled / Water cooled |
| Operating temperature (°C) | 10-30 |
| Power supply (100-240VAC) | PSU-W-LED |
| Expected lifetime (hours) | ＞10000 |
| Features | SM Fiber |
| Wavelength (nm) | 473±1 |
| Output power (mW) | 50-1000 |
| M² | <1.1 |
| Fiber core diameter | 3.5um,0.10NA |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MBL-W-473-SM: 473 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<2%) helps keep measured intensity changes attributable to the sample rather than source drift.
MBL-W-473-SM: 473 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<2%) helps keep measured intensity changes attributable to the sample rather than source drift.
MBL-W-473-SM: 473 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<2%) helps keep measured intensity changes attributable to the sample rather than source drift.
MBL-W-473-SM: Measurement benefits from a stable, focusable source. 473 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00 (single mode fiber output)) informs waist size and propagation.
System integration
Use these checks to connect MBL-W-473-SM to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber type: SM fiber (PM fiber optional) · Fiber connector: FC/APC. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
Cooled method: Air cooled / Water cooled · Operating temperature (°C): 10-30. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00 (single mode fiber output) · M2: <1.1. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MBL-W-473-SM with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MBL-W-473-SM (current) | MBL-S-473-SM | FC-W-462C |
|---|---|---|---|
| Wavelength | 473 nm | 473 nm | 462 nm |
| Optical power / pulse energy | 50~1000 mW | 1~50 mW | 30~40 W |
| Operating mode / pulse width | CW | CW | Confirm for this model |
| Beam quality | TEM00 (single mode fiber output) | TEM00 (single mode fiber output) | Confirm for this model |
Compare the MBL-W-473-SM with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide