Fiber output, PM options, seed formats
MGL-F-588 is a 588 nm Fiber laser. Used for applications such as fluorescence sensors, raman spectroscopy, laser printing, holography. Fiber output laser High Stability Yellow Laser. Key specifications: output / average power 200~300 mW, operating mode CW, polarization ratio >100:1, Horizontal (Vertical optional). View specifications, datasheet and enquiry options from Precisometer.
Specifications
12 specification rows
| Output / average power | 200~300 mW |
|---|---|
| Beam / notes | Fiber output laser High Stability Yellow Laser |
| Operating mode | CW |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Operating temperature (°C) | 10-35 |
| Modulation optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED/PSU-SR |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±2 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 45 |
Application context
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
MGL-F-588: 588 nm emission can be matched to the absorption or excitation band used in Applications such as fluorescence sensors. The stated stability or noise figure (<50) helps keep measured intensity changes attributable to the sample rather than source drift.
MGL-F-588: 588 nm emission sets the excitation and detector-band choice for Raman spectroscopy; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line.
MGL-F-588: 588 nm emission determines compatible optics, coatings and detectors for Laser printing. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
MGL-F-588: 588 nm emission determines compatible optics, coatings and detectors for Holography. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
System integration
Use these checks to connect MGL-F-588 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Operating temperature (°C): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Polarization ratio: >100:1, Horizontal (Vertical optional). Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MGL-F-588 with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
Compare the MGL-F-588 with nearby fiber lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
PhotonicsSingle-mode fiber does not preserve polarization. Pin the state, erase it with a scrambler, or maintain it in PM fiber — which one your measurement needs, and the response time and extinction ratio that decide it.
Open guide