Fiber output, PM options, seed formats
MGL-W-588A588 nm yellow fiber laser
588 nmThe MGL-W-588A is a 588 nm continuous-wave diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command.
Specifications
MGL-W-588A
17 specification rows
| Output / average power | 500~7000 mW |
|---|---|
| Beam / notes | Fiber output laser High Stability Yellow Laser |
| Operating mode | CW |
| Power Stability (rms, 4 hours ± 3°C) | <3%, <2%, (<1% optional) |
| Transverse mode | Near TEM00 |
| Beam divergence, full angle (mrad) | <2.0 |
| Beam diameter at the aperture (1/e2, mm) | ~4.0 |
| Polarization ratio | >50:1(100:1 optional), Horizontal(Vertical optional) |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-W-LED |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±2 |
| Warm-up time (minutes) | <10 |
| Pointing Stability(urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Pointing Stability Over Temperature (urad/°C) | <20 |
| Beam height from base plate (mm) | 80 |
What do you need?
Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MGL-W-588A with the closest available models in the Fiber Lasers family.
Related fiber lasers
Compare the MGL-W-588A with nearby fiber lasers across the wavelength range.
