Fiber output, PM options, seed formats
MGL-FN-588588 nm yellow fiber laser
588 nmThe MGL-FN-588 is a 588 nm continuous-wave diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. The TTL and analog modulation options control different things: TTL gates the beam on and off, while analog control varies its intensity. Modulation bandwidth sets how quickly the source can follow a changing command.
Specifications
MGL-FN-588
18 specification rows
| Output / average power | 300~800 mW |
|---|---|
| Beam / notes | Fiber output laser High Stability Yellow Laser |
| Operating mode | CW |
| Beam divergence (mrad) | <1.5 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Operating temperature (°C) | 10-35 |
| Modulation optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
| Power supply (100-240VAC) | PSU-H-FDA/PSU-H-LED/PSU-SR |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±1 |
| Power stability (rms, 4 hours ±3°C) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| M² | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | <1.5 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MGL-FN-588 with the closest available models in the Fiber Lasers family.
Related fiber lasers
Compare the MGL-FN-588 with nearby fiber lasers across the wavelength range.
