SLM, narrow linewidth, coherence
MSL-W-588588 nm yellow narrow-linewidth single-frequency laser
588 nmThe MSL-W-588 is a 588 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.
Specifications
MSL-W-588
21 specification rows
| Output / average power | 200~500 mW |
|---|---|
| Spectral linewidth | <0.00001 nm |
| M² | <1.5 |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3°C) | <3%, <2% |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Beam diameter at the aperture (1/e2, mm) | <3.0 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <20 |
| Pointing stability over temperature (urad/°C) | <8 |
| Cooled method (Water cooled) | WCH-580 |
| Operating temperature (°C) | 20-30 |
| Power supply (90-264VAC) | PSU-W-FDA |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±1 |
| Coherent length (m) | >50 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| Beam divergence, full angle (mrad) | <1.5 |
| Pointing stability (urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 58 |
What do you need?
Tell us the output power, linewidth and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MSL-W-588 with the closest available models in the Single-Frequency Lasers family.
Related single-frequency lasers
Compare the MSL-W-588 with nearby single-frequency lasers across the wavelength range.
