Power stability, linewidth, beam quality

MSL-FN-473473 nm blue narrow-linewidth CW laser

473 nm

The MSL-FN-473 is a 473 nm continuous-wave solid-state laser. Light is amplified in a solid gain medium inside an optical resonator. The resonator feeds light back through that medium to build the laser beam. The pump arrangement and cooling determine how energy is supplied and waste heat is removed. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.

Datasheet (PDF)View MSL-FN family Back to CW Lasers Browse all laser models

Specifications

MSL-FN-473

24 specification rows

Output / average power	100~300 mW
Spectral linewidth	<1 MHz
Power stability	<1%
Operating mode	CW
Transverse mode	TEM00
Longitudinal mode	Single
M2	<1.2
Beam diameter at the aperture (1/e2, mm)	<2.0
Polarization ratio	>100:1, Vertical (Horizontal optional)
Warm-up time (minutes)	<5
Pointing stability over temperature (urad /°C)	<8
Frequency shift (MHz) (over ±2°C and 8hrs) (optional)	<±200
Operating temperature (°C)	10-35
Power supply (100-240VAC)	PSU-H-FDA
Expected lifetime (hours)	>10000
Wavelength (nm)	473±1
Coherent length (m)	>50
Noise of amplitude (rms, 20Hz-20MHz)	<1%, <0.5%
M²	<1.2
Beam divergence, full angle (mrad)	<1.2
Pointing stability (urad) (over 2 hours after warm-up and ±3°C)	<50
Frequency shift with temp (MHz/°C) (optional)	<200
Beam height from base plate (mm)	27.4
Laser head consumption (W)	15 (typical), <25 (40°C)