Power stability, linewidth, beam quality
MLL-T-10641064 nm near-infrared CW laser
1064 nmMLL-T-1064 is a 1064 nm CW laser. Used for scientific experiment, optical instrument, optical sensor, measurement. M² factor: <1.2; Spectral line width (nm): <0.02; M²: <1.2. Key specifications: output / average power 1~10 W, spectral linewidth <0.02 nm, power stability <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MLL-T-1064
23 specification rows
| Output / average power | 1~10 W |
|---|---|
| Spectral linewidth | <0.02 nm |
| Power stability | <2%, <1%, <0.5% |
| Optical noise | <1% |
| M² | <1.2 |
| Beam / notes | M² factor: <1.2; Spectral line width (nm): <0.02 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Warm-up time (minutes) | <10 |
| Pointing Stability Over Temperature (urad/°C) | <20 |
| Polarization ratio | >50:1(100:1 optional), Horizontal(Vertical optional) |
| Cooled method | Air cooled |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-W-FDA/PSU-W-LED |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1064±1 |
| Output power (W) | 1- 10 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1% |
| Beam divergence, full angle (mrad) | <1.2 |
| Beam diameter at the aperture (1/e2, mm) | ~1.5 |
| Pointing Stability(urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 110 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz optional; TTL and Analog optional |
Applications
Uses named on this model’s datasheet.
- Scientific experiment
- Optical instrument
- Optical sensor
- Measurement
- Communication
- Spectrum analysis
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related cw lasers
Compare the MLL-T-1064 with nearby cw lasers across the wavelength range.
