Scientific research
MPL-S-266-HP: 266 nm emission determines compatible optics, coatings and detectors for Scientific research. The catalogued beam parameter (Near TEM00) helps predict how the source will focus and propagate through the instrument.
Pulse energy, repetition rate, pulse width
MPL-S-266-HP266 nm deep-UV Q-switched pulsed laser
266 nmMPL-S-266-HP is a 266 nm Pulsed laser. Used for scientific research, laser micromachining, lidar ranging, environmental monitoring. Key specifications: output / average power 6~100 mW, pulse energy 1~80 uJ, repetition rate 10 Hz-100 kHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MPL-S-266-HP
13 specification rows
| Wavelength | 266 nm |
|---|---|
| Output / average power | 6~100 mW |
| Pulse energy | 1~80 uJ |
| Repetition rate | 10 Hz-100 kHz |
| Pulse width | ~0.4 ns |
| Operating mode | Passively Q-switched |
| Power stability (rms, 4 hours, ±3°C) | <5%, <3% |
| Transverse mode | Near TEM00 |
| Beam diameter at the aperture (mm) | ~1.5 |
| Warm-up time (minutes) | <5 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-S-HP |
| Expected lifetime (hours) | >10000 |
| Beam divergence, full angle (mrad) | <1.5 |
Application context
Why this design is used
Applications named on this model’s datasheet, expanded with the model’s optical specifications.
Laser micromachining
MPL-S-266-HP: 266 nm emission determines compatible optics, coatings and detectors for Laser micromachining. The catalogued beam parameter (Near TEM00) helps predict how the source will focus and propagate through the instrument.
Lidar ranging
MPL-S-266-HP: Lidar ranging depends on how optical energy is delivered to the target; 266 nm emission governs absorption, while the listed temporal parameter (1~80 uJ) governs peak intensity and heat deposition.
Environmental monitoring
MPL-S-266-HP: 266 nm emission determines compatible optics, coatings and detectors for Environmental monitoring. The catalogued beam parameter (Near TEM00) helps predict how the source will focus and propagate through the instrument.
System integration
Integration and compatibility
Use these checks to connect MPL-S-266-HP to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature (℃): 10-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: Near TEM00 · Beam diameter at the aperture (mm): ~1.5
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for MPL-S-266-HP
What cooling does the MPL-S-266-HP require?
Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the MPL-S-266-HP deliver?
Transverse mode: Near TEM00 · Beam diameter at the aperture (mm): ~1.5. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MPL-S-266-HP with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MPL-S-266-HP (current) | MPL-Q-266 | MPL-Q1-266 |
|---|---|---|---|
| Wavelength | 266 nm | 266 nm | 266 nm |
| Optical power / pulse energy | 6~100 mW | 1~30 mW | 10 mW |
| Operating mode / pulse width | 10 Hz-100 kHz | 3-12 kHz | 1 kHz |
| Beam quality | Near TEM00 | Near TEM00 | Near TEM00 |
Related pulsed lasers
Compare the MPL-S-266-HP with nearby pulsed lasers across the wavelength range.
