PIV, confocal, wafer, marking systems
AO-V-355-Water is a 355 nm Application Systems. Key specifications: output / average power 1~5 W, operating mode Acousto-Optic Q-switched, transverse mode TEM00. View specifications, datasheet and enquiry options from Precisometer.
Specifications
14 specification rows
| Output / average power | 1~5 W |
|---|---|
| Operating mode | Acousto-Optic Q-switched |
| Transverse mode | TEM00 |
| Beam quality (M2) | <1.2 |
| Cooled method | Water Cooled |
| Operating temperature (℃) | 10~35 |
| Weight (Kg) | 3.0 |
| Wavelength (nm) | 355±1 |
| Warm-up time (minutes) | <10 |
| Beam Circularity (%) | >90 |
| Beam divergence, full angle (mrad) | <1.5（3×beam expansion） |
| Beam diameter at the aperture (1/e2, mm) | ~1.5（3×beam expansion） |
| Beam height from base plate (mm) | 40 |
| Power supply (220/110VAC) | PSU-AOM(3U) |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
AO-V-355-Water: 355 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
AO-V-355-Water: Laboratory measurement benefits from a stable, focusable source. 355 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
System integration
Use these checks to connect AO-V-355-Water to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Water Cooled · Operating temperature (℃): 10~35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00 · Beam quality (M2): <1.2. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Weight (Kg): 3.0. Verify the housing drawing and bolt length before designing a mount. A laser head rarely carries a table thread itself, so the adapter between it and an M6 or 1/4"-20 grid is part of the specification.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare AO-V-355-Water with the closest available models in the Application Systems family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | AO-V-355-Water (current) | FC-438 | MDL-438(FC) |
|---|---|---|---|
| Wavelength | 355 nm | 438 nm | 438 nm |
| Optical power / pulse energy | 1~5 W | 1~1250 mW | 1~450 mW |
| Operating mode / pulse width | Acousto-Optic Q-switched | Confirm for this model | Confirm for this model |
| Beam quality | TEM00 | Confirm for this model | Confirm for this model |
Compare the AO-V-355-Water with nearby application systems across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide