Back to Home
Precisometer

Power stability, linewidth, beam quality

CW-760~840786 nm near-infrared tunable CW laser

786 nm

The CW-760~840 is a 786 nm continuous-wave Ti:sapphire laser. An optical pump excites titanium ions in a sapphire crystal. Their broad gain spectrum allows the resonator to select and tune the output wavelength within the specified range. Tuning changes the selected output wavelength so spectral features can be scanned with the same source. The tuning band specifies which lines can be reached; linewidth describes the width of the selected line.

Datasheet (PDF)View CW familyBack to CW LasersBrowse all laser models

Specifications

CW-760~840

16 specification rows

Wavelength786 nm
Output / average power1~2000 mW
Beam / notesTunable Infrared Laser
Operating modePulsed
Single pulse energy (nJ)0.1-0.6
Rep. rate (MHz)80±2
Ave power stability (rms, 4 hours±3℃)<2%, <1%
pulseduration, / high
Warm-up time (minutes)<10
Transverse modeTEM00
M2 factor<1.2
Polarization ratio>100:1 Vertical
Cooled methodAir cooled
Operating temperature (℃)10-35
Power supply (100-240VAC)12V/6.67A
Expected lifetime (hours)>10000
Frequency doublerLASER HEAD (780) / POWER SUPPLY

What do you need?

Tell us the pulse energy, pulse width, repetition rate and beam delivery you need, and we'll reply with the matching configuration and lead time.

Send your requirementsOpen laser selector

Model selection

Nearby series comparison

Compare CW-760~840 with the closest available models in the CW Lasers family.

Selection parameterCW-760~840 (current)CW-760~840CW-760~840
Wavelength786 nm760 nm775 nm
Optical power / pulse energy1~2000 mW1~2000 mW1~2000 mW
Operating mode / pulse widthPulsedPulsedPulsed
Beam qualityTEM00TEM00TEM00

Related cw lasers

Compare the CW-760~840 with nearby cw lasers across the wavelength range.

Choosing a laser

Guides that put this laser in context

Which specifications decide the experiment, and which ones cost money without changing the result.

All guides
Laser emission spectrum, intensity noise traces, and beam quality profiles illustrating the main laser specifications
Photonics
13 min Spec lab

Laser specifications decoded

Linewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.

Open guide
Low-noise laser head and controller of the type specified for optical trapping
Optical trapping
16 min 2 simulations

Choosing a laser for optical tweezers

Why wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.

Open guide
Fluorescently labeled cells in a sharp confocal focal plane
Confocal microscopy
14 min Design lab

Designing a confocal fluorescence excitation system

Connect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.

Open guide