Power stability, linewidth, beam quality
MSL-R-3 60 is a 360 nm CW laser. Used for flow cytometry, dna sequencing, optical instrument, medical imaging. Key specifications: output / average power 80~300 mW, spectral linewidth < 5 MHz, power stability <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
4 specification rows
| Wavelength | 360 nm |
|---|---|
| Output / average power | 80~300 mW |
| Spectral linewidth | < 5 MHz |
| Power stability | <1% |
| Optical noise | <0.5% |
Series-level technical context
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 8 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Nearby series records state M²: <1.2, M²: <1.5, Beam divergence, full angle (mrad): <1.0, and Beam divergence, full angle (mrad): <1.2. These are series context, not guaranteed values for MSL-R-3 60; confirm them on the order-specific datasheet.
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MSL-R-3 60: 360 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-R-3 60: 360 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
MSL-R-3 60: 360 nm emission determines compatible optics, coatings and detectors for Optical instrument. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
MSL-R-3 60: 360 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MSL-R-3 60 with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MSL-R-3 60 (current) | UV-FN-360-X | MSL-FN-360 |
|---|---|---|---|
| Wavelength | 360 nm | 360 nm | 360 nm |
| Optical power / pulse energy | 80~300 mW | 1~50 mW | 1~80 mW |
| Operating mode / pulse width | Confirm for this model | CW | CW |
| Beam quality | Confirm for this model | TEM00 | TEM00 |
Compare the MSL-R-3 60 with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide