Power stability, linewidth, beam quality
UV-DP-360-A is a 360 nm CW laser. Used for flow cytometry, dna sequencing, optical instrument, medical imaging. Features: Air Cooled. Key specifications: output / average power 150~400 mW, spectral linewidth <0.2 nm, power stability <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
17 specification rows
| Output / average power | 150~400 mW |
|---|---|
| Spectral linewidth | <0.2 nm |
| Power stability | <1% |
| Beam / notes | Features: Air Cooled |
| Operating mode | CW |
| Transverse mode | Near TEM00 |
| Beam diameter at the aperture (1/e2, mm) | <3.0 |
| Warm-up time (minutes) | <10 |
| Polarization ratio | >100:1, Vertical (Horizontal optional) |
| Cooled method | Air Cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-DP-A |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 360±1 |
| Output power (mW) | 150-400 |
| Beam divergence, full angle (mrad) | <3.0 |
| Beam height from base plate (mm) | 50 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
UV-DP-360-A: 360 nm emission can be matched to the absorption or excitation band used in Flow cytometry. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
UV-DP-360-A: 360 nm emission can be matched to the absorption or excitation band used in DNA sequencing. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
UV-DP-360-A: 360 nm emission determines compatible optics, coatings and detectors for Optical instrument. The catalogued beam parameter (Near TEM00) helps predict how the source will focus and propagate through the instrument.
UV-DP-360-A: 360 nm emission can be matched to the absorption or excitation band used in Medical imaging. The stated stability or noise figure (<1%) helps keep measured intensity changes attributable to the sample rather than source drift.
System integration
Use these checks to connect UV-DP-360-A to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Cooled method: Air Cooled · Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: Near TEM00 · Beam diameter at the aperture (1/e2, mm): <3.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare UV-DP-360-A with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | UV-DP-360-A (current) | UV-FN-360-X | MSL-FN-360 |
|---|---|---|---|
| Wavelength | 360 nm | 360 nm | 360 nm |
| Optical power / pulse energy | 150~400 mW | 1~50 mW | 1~80 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | Near TEM00 | TEM00 | TEM00 |
Compare the UV-DP-360-A with nearby cw lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Optical trappingWhy wavelength is decided by photodamage, focal heating, and detector bandwidth rather than trapping force — and what laser noise costs you in piconewtons.
Open guide
Confocal microscopyConnect fluorophores, pinhole size, Airy units, spatial sampling, scan timing, modulation, and power after the fiber in one practical design workflow.
Open guide