Fiber output, PM options, seed formats
FL-1053-SLM1053 nm near-infrared narrow-linewidth single-frequency fiber laser
1053 nmThe FL-1053-SLM is a 1053 nm continuous-wave fiber laser. A seed laser establishes the optical signal, and a fiber amplifier increases its power while guiding the light in active fiber. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.
Specifications
FL-1053-SLM
25 specification rows
| Output / average power | 1~10 W |
|---|---|
| Spectral linewidth | <10 kHz |
| M² | <1.1 |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Frequency shift (MHz) (over ±2℃and 8 hours ) | <±200 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1053±1 |
| Temperature turning range (nm) | >0.4 |
| PZT Turning range (GHz) | >3 |
| PZT Turning bandwidth (kHz) | >5 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Pointing stability (urad) | <10 |
What do you need?
Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-1053-SLM with the closest available models in the Fiber Lasers family.
| Selection parameter | FL-1053-SLM (current) | FL-1053-LN-L | FL-1053-LN-H |
|---|---|---|---|
| Wavelength | 1053 nm | 1053 nm | 1053 nm |
| Optical power / pulse energy | 1~10 W | 1~10 W | 10~35 W |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.1 | <1.1 | TEM00, <1.1 |
Related fiber lasers
Compare the FL-1053-SLM with nearby fiber lasers across the wavelength range.
