Fiber output, PM options, seed formats
FL-1053-LN-H1053 nm near-infrared single-frequency low-noise fiber laser
1053 nmThe FL-1053-LN-H is a 1053 nm continuous-wave fiber laser. Pump energy is supplied to an active fiber, which guides the light and provides optical gain as it propagates. Output coupling then delivers the amplified beam to the experiment. Single-longitudinal-mode operation selects one resonator frequency. Linewidth describes the spread around that frequency, while frequency drift describes how its center moves over time. This distinction matters when matching the source to a narrow resonance or an interferometer.
Specifications
FL-1053-LN-H
25 specification rows
| Output / average power | 10~35 W |
|---|---|
| Beam / notes | Fiber Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Spectral linewidth (nm) | <0.004 |
| Relative intensity noise (rms,10Hz-3MHz) | <0.1%, <0.05% |
| M2 | TEM00, <1.1 |
| Fiber connector | Collimator |
| Fiber length(m) | <3 |
| Fiber jacket | Metal |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Pointing stability (urad) | <5 / <10 |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled (≤20W) / Water cooled (≤35W) |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Selectable wavelength range(nm) | 1014-1060 |
| Typical wavelength (nm) | 1053 |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| M² | TEM00, <1.1 |
What do you need?
Tell us the output power, linewidth and fibre output you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FL-1053-LN-H with the closest available models in the Fiber Lasers family.
| Selection parameter | FL-1053-LN-H (current) | FL-1053-LN-L | FL-1053-SLM |
|---|---|---|---|
| Wavelength | 1053 nm | 1053 nm | 1053 nm |
| Optical power / pulse energy | 10~35 W | 1~10 W | 1~10 W |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | TEM00, <1.1 | <1.1 | <1.1 |
Related fiber lasers
Compare the FL-1053-LN-H with nearby fiber lasers across the wavelength range.
