Communication
MXL-1930(FC): 1930 nm emission must sit inside the fiber-component passband used for Communication; connector polish, fiber mode, linewidth and back-reflection tolerance should be specified as one optical interface.
Power stability, linewidth, beam quality
MXL-1930(FC)1930 nm infrared CW laser
1930 nmMXL-1930(FC) is a 1930 nm CW laser. Used for communication, spectrum analysis, measurement, flow cytometry. 1930 nm Infrared Laser. Key specifications: output / average power 1~510 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MXL-1930(FC)
2 specification rows
| Wavelength | 1930 nm |
|---|---|
| Output / average power | 1~510 mW |
| Beam / notes | 1930 nm Infrared Laser |
Series-level technical context
Engineering context for a thin CW Lasers record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 5 nearby configurations on the same source-product record; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 1~15 W
- • Output / average power: 1~600 mW
- • Output / average power: 1~2000 mW
- • Operating mode: CW
- • Power stability (rms, over 4 hours): <3%, <2%, <1%
Beam-quality tolerance context
Nearby series records state Beam divergence, full angle (mrad): <3. 0, Beam divergence, full angle (mrad): <2, and Beam divergence, full angle (mrad): <8. These are series context, not guaranteed values for MXL-1930(FC); confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser head and temperature-stabilized base
- Step 2Safety shutter and optional optical isolator
- Step 3Beam steering, expansion or fiber-launch optics
- Step 4Experiment input with wavelength-matched coatings
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Spectrum analysis
MXL-1930(FC): 1930 nm emission sets the excitation and detector-band choice for Spectrum analysis; linewidth and wavelength stability determine how cleanly weak spectral features can be separated from the laser line.
Measurement
MXL-1930(FC): Measurement benefits from a stable, focusable source. 1930 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Flow cytometry
MXL-1930(FC): 1930 nm emission can be matched to the absorption or excitation band used in Flow cytometry. Power stability and beam pointing should be confirmed because both affect quantitative image or fluorescence intensity.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MXL-1930(FC) with the closest available models in the CW Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MXL-1930(FC) (current) | FC-1930 | MDL-H-1930 |
|---|---|---|---|
| Wavelength | 1930 nm | 1930 nm | 1930 nm |
| Optical power / pulse energy | 1~510 mW | 1~15 W | 1~600 mW |
| Operating mode / pulse width | Confirm for this model | Confirm for this model | CW |
| Beam quality | Confirm for this model | Confirm for this model | Multimode |
Related cw lasers
Compare the MXL-1930(FC) with nearby cw lasers across the wavelength range.
