Fiber output, PM options, seed formats
MLL-III-915-SM 915 nm near-infrared fiber laser
915 nm- The MLL-III-915-SM is a 915 nm continuous-wave direct diode laser.
- Output / average power: 1~400 mW
- Operating mode: CW
- Modulation option: DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional
Specifications
MLL-III-915-SM
21 specification rows
| Output / average power | 1~400 mW |
|---|---|
| Power stability | <2%, <1%, <0.5% |
| M² | 1.1 |
| Operating mode | CW |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| Fiber Core diameter | 4-9μm, 0.12NA |
| Fiber connector | FC/PC, FC/APC optional |
| Transverse mode | TEM00 |
| Warm-up time (minutes) | <5 |
| Cooled method | Conduction |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM |
| Expected lifetime (hours) | >10000 |
| Central wavelength (nm) | 915±10 |
| Output power after fiber (mW) | 1-400 |
| Fiber type | SM fiber, PM fiber optional |
| Fiber length | 1m |
| Fiber jacket | Metal, PVC optional |
| Ellipticity | >0.95 |
| M2 after fiber | ~1.1 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional |
Construction details
- Fiber interface: SM fiber, PM fiber optional.
What do you need?
- Output power
- Linewidth
- Fibre output (fibre type, connector)
Model selection
Nearby series comparison
Compare MLL-III-915-SM with the closest available models in the Fiber Lasers family.
| Selection parameter | MLL-III-915-SM (current) | MDL-III-915-SM | FC-W-915 |
|---|---|---|---|
| Wavelength | 915 nm | 915 nm | 915 nm |
| Optical power / pulse energy | 1~400 mW | 1~400 mW | 20~50 W |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | 1.1 | 1.1 | — |
Related fiber lasers
Compare the MLL-III-915-SM with nearby fiber lasers across the wavelength range.

