29 models · 3 series
Infrared Laser, 915 NM Infrared Diode Lasers, High Power Diode Laser System.
21 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Operating temperature (℃) | Power supply (100-240VAC) | Parameters of customed power supply | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (°C) | Cooled method | Power Stability (rms, 4 hours ± 3°C) | Fiber core diameter | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Power stability(rms, over 4 hours) | Warm-up time minutes | Warranty (years) | Operating voltage(PSU-V-OEM) | Operating voltage(PSU-I-OEM) | Operating temperature | Storage temperature | Humidity | Operating voltage(internal PCB) | Operating voltage(internal PCB1) | Operating voltage(external PCB2) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUN-902~923 | 915 nm | 1~40 mW | <3%, <2%, <1% | Near TEM00 | <1.0 | <5 | 20-30 | PSU-TUN | TEC: 7-12kΩ | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-915 | 915 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | >10000 | <1%, <0.5% | <1.1 | 25±3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-915 | 915 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | <1%, <0.5% | – | 10-35 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-915 | 915 nm | 1.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | <1%, <0.5% | – | 10-35 | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-915 | 915 nm | 5~8 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | 10-35 | PSU-H-FDA/PSU-H-LED | – | >10000 | <1%, <0.5% | – | – | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-915 | 915 nm | 1~400 mW | <2%, <1%, <0.5% | TEM00 | <1.5 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D | – | >10000 | – | <1.1 | 25±3 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-915 | 915 nm | 1~100 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-915L | 915 nm | 1~270 mW | <2%, <1%, <0.5% | – | <1.0 | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | <1.5 | 10-35 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-915R | 915 nm | 1~350 mW | <3%, <2%, <1% | Round | ~10 / ~20 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | – | 10-35 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-915 | 915 nm | 1~1500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | >10000 | – | – | 10-35 | Conduction | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-915 | 915 nm | 1.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-915 | 915 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-NS-915 | 915 nm | 1~200 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-915 | 915 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | – | PSU-H-FDA/PSU-H-LED | – | >10000 | – | – | 10-35 | Air cooled | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-915 | 915 nm | 1~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-915 | 915 nm | 20~50 W | – | – | – | – | – | – | – | – | – | – | – | Air cooled | <2%, <1%, (<0.5% optional) | 400um, 0.22 NA | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-915(FC) | 915 nm | 1 mW~7 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-915 | 915 nm | 1~10 mW | – | – | – | – | – | – | – | – | – | – | -10°C to +45°C | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| PGL-V-H-915 | 915 nm | 1~1500 mW | – | Multimode | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | TTL30kHz and Analog 0-5V | 9 pin connector | – | – | – | <5%, <3%, <1% | <10 | 1 | 100-240VAC | 12VDC | -10°C to 50°C | -20°C to 80°C | < 90%, non-condensing | – | – | – | Datasheet |
| PGL-V-H-FC-915 | 915 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-VI-915 | 915 nm | 1~100 mW | – | Near TEM00 | – | – | – | – | – | 10000 | – | – | – | – | – | – | – | – | – | Cable with flying leads | – | – | – | – | – | 1 | – | – | 0°C to 40°C | -20°C to 80°C | < 90 %, non-condensing | 3VDC | 5VDC(TTL30kHz and Analog0-3V,0-5V, optional) | 5-12VDC(TTL30kHz and Analog 0-3V,0-5V, optional) | Datasheet |
High Power Laser Diode Module |
6 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature(10 s max) | Fiber Core Diameter | Fiber Cladding Diameter | Fiber Buffer Diameter | Lead Soldering Temperature (10 s max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-915-100-2 | 915 nm | 100 W | 12.25 / V | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | – | – | – | – | Datasheet |
| LDM-915-150-4 | 915 nm | 150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| LDM-915-200-4 | 915 nm | 200 W | - / 22.4 / 25.0 / V | 1-5 / m | - / SMA905 / - / - | 15 / 35 / ℃ | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | – | - / 400 / - / μm | - / 440 / - / μm | - / 700 / - / μm | - / 250 / ℃ | Datasheet |
| LDM-915-300-2 | 915 nm | 300 W | - / 29.7 / - / V | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 / ℃ | - / 200 / - / μm | - / 220 / - / μm | 500 | – | Datasheet |
| LDM-915-30-2 | 915 nm | 30 W | 3.4 / V | 1-5 / m | SMA905 / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | - / 200 / - / μm | – | – | – | Datasheet |
| LDM-915-50-2 | 915 nm | 50 W | - / 8.7 / - / V | - / 1-5 / - / m | – | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | - / 200 / - / μm | – | – | – | Datasheet |
SM Fiber Coupled Laser |
2 models| Model | Wavelength | Output / average power | Power stability | M² | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Transverse mode | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-III-915-SM | 915 nm | 1~400 mW | <2%, <1%, <0.5% | 1.1 | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | Datasheet |
| MLL-III-915-SM | 915 nm | 1~400 mW | <2%, <1%, <0.5% | 1.1 | – | 4-9μm, 0.12NA | FC/PC, FC/APC optional | – | TEM00 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.