Optical instrumentation
FC-W-915: 915 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
Fiber output, PM options, seed formats
FC-W-915915 nm near-infrared high-power fiber laser
915 nmFC-W-915 is a 915 nm Fiber laser. Key specifications: output / average power 20~50 W, operating mode CW, power stability (rms, 4 hours ± 3°c) <2%, <1%, (<0.5% optional). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FC-W-915
16 specification rows
| Output / average power | 20~50 W |
|---|---|
| Operating mode | CW |
| Power Stability (rms, 4 hours ± 3°C) | <2%, <1%, (<0.5% optional) |
| Fiber core diameter | 400um, 0.22 NA |
| Cooled method | Air cooled |
| Wavelength (nm) | 915±5 |
| After fiber output power (W) | 20-50 |
| Red pilot light | Available on request |
| Fiber connector | SMA905, FC/PC optional |
| Fiber length | 2m |
| Fiber Jacket | Metal, PVC optional |
| LED display | Diode current |
| Operating temperature(°C) | 10-40 |
| Modulation option | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional |
| Operating voltage (VAC) | 100-240 |
| Expected lifetime (hours) | >10000 |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
FC-W-915: Laboratory measurement benefits from a stable, focusable source. 915 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
System integration
Integration and compatibility
Use these checks to connect FC-W-915 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Fiber delivery interface
- Fiber core diameter: 400um, 0.22 NA · Fiber connector: SMA905, FC/PC optional
- Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
- Thermal management
- Cooled method: Air cooled · Operating temperature(°C): 10-40
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Technical FAQ
Integration questions for FC-W-915
How is the FC-W-915 output delivered?
Fiber core diameter: 400um, 0.22 NA · Fiber connector: SMA905, FC/PC optional. Match the listed connector and fiber mode exactly; SMA905, FC/PC and FC/APC are not interchangeable, and a single-mode launch requires mode-field as well as numerical-aperture matching.
What cooling does the FC-W-915 require?
Cooled method: Air cooled · Operating temperature(°C): 10-40. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare FC-W-915 with the closest available models in the Fiber Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | FC-W-915 (current) | MDL-III-915-SM | MLL-III-915-SM |
|---|---|---|---|
| Wavelength | 915 nm | 915 nm | 915 nm |
| Optical power / pulse energy | 20~50 W | 1~400 mW | 1~400 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | Confirm for this model | 1.1 | 1.1 |
Related fiber lasers
Compare the FC-W-915 with nearby fiber lasers across the wavelength range.
