Power stability, linewidth, beam quality
MLL-FN-588588 nm yellow CW laser
588 nmThe MLL-FN-588 is a 588 nm continuous-wave diode-pumped solid-state laser. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Continuous-wave operation provides a sustained beam for experiments that need steady illumination.
Specifications
MLL-FN-588
19 specification rows
| Output / average power | 200-300 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3°C) | <3%, <2%, <1% |
| Transverse mode | TEM00 |
| Beam diameter at the aperture (1/e2, mm) | <1.5 |
| Warm-up time (minutes) | <5 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Operating temperature (°C) | 10-35 |
| Power supply (100-240VAC) | PSU-H-FDA |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±2 |
| Spectral line width (nm) | <0.1, (<0.003optional@1-200mW) |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| M² | <1.2 |
| Beam divergence (mrad) | <1.5 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 27.4 |
What do you need?
Tell us the output power, beam quality and beam delivery you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MLL-FN-588 with the closest available models in the CW Lasers family.
| Selection parameter | MLL-FN-588 (current) | MSL-FN-588 | MSL-W-588 |
|---|---|---|---|
| Wavelength | 588 nm | 588 nm | 588 nm |
| Optical power / pulse energy | 200-300 mW | 1~200 mW | 200-500 mW |
| Operating mode / pulse width | CW | CW | CW |
| Beam quality | <1.2 | <1.2 | <1.5 |
Related cw lasers
Compare the MLL-FN-588 with nearby cw lasers across the wavelength range.
