Fiber output, PM options, seed formats
MLL-T-1064-SM1064 nm near-infrared fiber laser
1064 nmMLL-T-1064-SM is a 1064 nm Fiber laser. Used for scientific research, laser radar, life science, microelectronics. SM Fiber; M² factor: <1.1; Spectral line width (nm): <0.02; M²: <1.1. Key specifications: output / average power 1~7000 mW, spectral linewidth <0.02 nm, power stability <2%, <1%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MLL-T-1064-SM
23 specification rows
| Output / average power | 1~7000 mW |
|---|---|
| Spectral linewidth | <0.02 nm |
| Power stability | <2%, <1% |
| Optical noise | <1% |
| M² | <1.1 |
| Beam / notes | SM Fiber; M² factor: <1.1; Spectral line width (nm): <0.02 |
| Operating mode | CW |
| Transverse mode | TEM00 (single mode fiber output) |
| Fiber numerical aperture | 0.10-0.12 |
| Polarization ratio | (optional) / >50:1 after PM fiber |
| Fiber type | SM fiber (PM fiber optional) |
| Fiber connector | FCAPC |
| Fiber jacket | PVC |
| Fiber length | 1m (Other lengths can be customized) |
| Warm-up time (minutes) | <10 |
| Cooled method | Air Cooled |
| Operating temperature (℃) | 10-30 |
| Power supply (100-240VAC) | PSU-W-LED/ PSU-W-FDA |
| Expected lifetime (hours) | ＞10000 |
| Wavelength (nm) | 1064±1 |
| Output power (mW) | 1-7000 |
| Noise of amplitude (rms, 20Hz~20MHz) | <1% |
| Modulation optional | DC-1kHz,1kHz-10kHz,10kHz-30kHz;TTL and Analog optional |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Laser radar
- Life science
- Microelectronics
- Wafer inspection
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the MLL-T-1064-SM with nearby fiber lasers across the wavelength range.
