Pulse energy, repetition rate, pulse width
EO-266-Subnano-Hi266 nm deep-UV Q-switched pulsed laser
266 nmThe EO-266-Subnano-Hi is a 266 nm nanosecond diode-pumped solid-state laser. The specified pulse energy is 1–500 μJ at 5 kHz. Select energy, timing and cooling for the same configuration. Laser diodes optically pump a solid gain medium inside a resonator. The pump supplies the energy; repeated passes through the gain medium amplify the laser light. Q-switching stores energy in the gain medium while resonator losses are high, then lowers those losses to release a pulse. Pulse energy and repetition rate must be considered together, because changing the pulse spacing changes the average power for a fixed pulse energy.
Specifications
EO-266-Subnano-Hi
14 specification rows
| Wavelength (nm) | 266 |
|---|---|
| Operating mode | Actively Q-switched |
| Pulse energy | 1–500 μJ at 5 kHz |
| Repetition rate | 100 Hz-10 kHz |
| Pulse width | <1.5 ns / ~2 ns at 5 kHz, depending on variant |
| Cooling | Air or Water cooled |
| High energy diode pumped all solid state | Power stability (rms, 4 hours ±3℃) / <5% |
| Beam diameter (mm) | ~1.5mm |
| Beam divergence, full angle (mrad) | ≤3mrad |
| Warm-up time (minutes) | <15 |
| Operating voltage (VDC) | 24V/21A |
| Operating temperature (℃) | 15-30 |
| Expected lifetime (hours) | >10000 |
| Power stability (rms, 4 hours ±3℃) | <5% |
Select energy and timing together
Specify pulse energy, repetition rate, pulse duration, trigger requirements and cooling for the same configuration. The maximum energy and maximum repetition rate can describe different variants. Energy per pulse is quoted in μJ, mJ or J; pulse duration is quoted in ps, ns or ms.
Compare high-energy laser models →What do you need?
Tell us the pulse energy, pulse width, repetition rate, trigger and cooling requirements you need, and we'll reply with the matching configuration and lead time.
Model selection
Nearby series comparison
Compare EO-266-Subnano-Hi with the closest available models in the Pulsed Lasers family.
| Selection parameter | EO-266-Subnano-Hi (current) | MPL-Q-266 | MPL-Q1-266 |
|---|---|---|---|
| Wavelength | 266 nm | 266 nm | 266 nm |
| Optical power / pulse energy | 1–500 μJ at 5 kHz | 1~30 mW | 10 mW |
| Operating mode / pulse width | Actively Q-switched | Passively Q-switched | Passively Q-switched |
| Beam quality | ≤3mrad | <2 | <2 |
Related pulsed lasers
Compare the EO-266-Subnano-Hi with nearby pulsed lasers across the wavelength range.
