Back to Home

Pulse energy, repetition rate, pulse width

AO-V-473473 nm blue Q-switched pulsed laser

473 nm

AO-V-473 is a 473 nm Pulsed laser. Used for marking, carving, measure, research. Key specifications: output / average power 500 mW, pulse energy 50 uJ, repetition rate 1-10 kHz. View specifications, datasheet and enquiry options from Precisometer.

Specifications

AO-V-473

16 specification rows

Output / average power500 mW
Pulse energy50 uJ
Repetition rate1-10 kHz
Pulse width~80 ns @<1 kHz
Operating modeActively Q-switched
Power stability (rms, 4 hours ± 3°C)<5%, <3%,<2%
Beam divergence, full angle (mrad)<2.5
Cooled methodAir cooled
Operating temperature (℃)10-35
Power supply (100-240VAC)PSU-AOM
Expected lifetime (hours)>10000
Wavelength (nm)473±1
Rep. rate1-10kHz
Beam diameter at the aperture (1/e2, mm)~2.0
Beam height from base plate (mm)62.1
Warm-up time (minutes)<10

Application context

Why this design is used

Applications named on this model’s datasheet, expanded with the model’s optical specifications.

Marking

AO-V-473: Marking depends on how optical energy is delivered to the target; 473 nm emission governs absorption, while the listed temporal parameter (50 uJ) governs peak intensity and heat deposition.

Carving

AO-V-473: 473 nm emission determines compatible optics, coatings and detectors for Carving. The catalogued beam parameter (<2.5) helps predict how the source will focus and propagate through the instrument.

Measure

AO-V-473: Measure benefits from a stable, focusable source. 473 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (<2.5) informs waist size and propagation.

Research

AO-V-473: 473 nm emission determines compatible optics, coatings and detectors for Research. The catalogued beam parameter (<2.5) helps predict how the source will focus and propagate through the instrument.

System integration

Integration and compatibility

Use these checks to connect AO-V-473 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Thermal management
Cooled method: Air cooled · Operating temperature (℃): 10-35
Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Beam parameters at the output
Beam divergence, full angle (mrad): <2.5 · Beam diameter at the aperture (1/e2, mm): ~2.0
Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.

Technical FAQ

Integration questions for AO-V-473

What cooling does the AO-V-473 require?

Cooled method: Air cooled · Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.

What beam does the AO-V-473 deliver?

Beam divergence, full angle (mrad): <2.5 · Beam diameter at the aperture (1/e2, mm): ~2.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.

Need this configured?

Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.

Open laser selector

Model selection

Nearby series comparison

Compare AO-V-473 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.

Selection parameterAO-V-473 (current)MPL-U-473AO-V-473/50uJ
Wavelength473 nm473 nm473 nm
Optical power / pulse energy500 mW1~10 mW500 mW
Operating mode / pulse width1-10 kHz1 Hz-4 kHzQ-switched
Beam quality<2.5TEM00<2.5