Optical instrumentation
MPL-FN-556: 556 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
Pulse energy, repetition rate, pulse width
MPL-FN-556556 nm green Q-switched pulsed laser
556 nmMPL-FN-556 is a 556 nm Pulsed laser. Q-switched Yellow Green Laser. Key specifications: operating mode Q-switched, output / average power 1~300 mW, pulse energy 1~60 uJ. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MPL-FN-556
18 specification rows
| Operating mode | Q-switched |
|---|---|
| Output / average power | 1~300 mW |
| Pulse energy | 1~60 uJ |
| Beam / notes | Q-switched Yellow Green Laser |
| Wavelength (nm) | 556±1 |
| Single pulse energy (µJ) | 1-60 |
| Pulse duration (ns) | ~35 |
| Peak power (kW) | 0.1-1.7 |
| Power stability (rms, 4 hours ±3°C) | <5%, <3%, <2% |
| Transverse mode | TEM00 |
| M² | <2.0 |
| Beam diameter at the aperture (mm) | ~1.5 |
| Beam divergence, full angle (mrad) | <1.5 |
| Warm-up time (minutes) | <5 |
| Beam height from base plate (mm) | 27.4 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-SR |
| Expected lifetime (hours) | >10000 |
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
MPL-FN-556: Laboratory measurement benefits from a stable, focusable source. 556 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
System integration
Integration and compatibility
Use these checks to connect MPL-FN-556 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Thermal management
- Operating temperature (℃): 10-35
- Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
- Beam parameters at the output
- Transverse mode: TEM00 · M²: <2.0
- Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Technical FAQ
Integration questions for MPL-FN-556
What cooling does the MPL-FN-556 require?
Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
What beam does the MPL-FN-556 deliver?
Transverse mode: TEM00 · M²: <2.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MPL-FN-556 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
Related pulsed lasers
Compare the MPL-FN-556 with nearby pulsed lasers across the wavelength range.
