Optical instrumentation
MIL-1073(FC): 1073 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. Beam quality, divergence and pointing stability should be checked against the experiment geometry.
PIV, confocal, wafer, marking systems
MIL-1073(FC)1073 nm near-infrared laser system
1073 nmMIL-1073(FC) is a 1073 nm Application Systems. Key specifications: output / average power 1~1350 mW. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MIL-1073(FC)
1 specification rows
| Wavelength | 1073 nm |
|---|---|
| Output / average power | 1~1350 mW |
Series-level technical context
Engineering context for a thin Application Systems record
This model has no standalone PDF and only a small number of model-specific rows. The values below are traceable context from 12 wavelength-near application systems records; they define the parameters to qualify, but are not substituted for an order-specific datasheet.
Typical operating fields in the series
- • Output / average power: 20 W
- • Output / average power: 12 W/ 15 W
- • Output / average power: 3 W/ 4 W/ 6 W/ 8 W/ 10 W
- • Operating mode: Q-switched
- • Power stability (rms, 4 hours ± 3°C): <2%，<1%
Beam-quality tolerance context
Nearby series records state M²: <1.2 and Beam divergence, full angle (mrad): <1.5. These are series context, not guaranteed values for MIL-1073(FC); confirm them on the order-specific datasheet.
Optical integration schematic
- Step 1Laser head and temperature-stabilized base
- Step 2Safety shutter and optional optical isolator
- Step 3Beam steering, expansion or fiber-launch optics
- Step 4Experiment input with wavelength-matched coatings
Application context
Why this design is used
Typical uses for this laser type, with the selection logic tied to the model record.
Laboratory measurement
MIL-1073(FC): Laboratory measurement benefits from a stable, focusable source. 1073 nm emission fixes the compatible coatings and detector response, while M², divergence and pointing stability should be confirmed for the intended beam path.
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Nearby series comparison
Compare MIL-1073(FC) with the closest available models in the Application Systems family. Confirm option-dependent values on the final configuration before ordering.
Related application systems
Compare the MIL-1073(FC) with nearby application systems across the wavelength range.
