Pulse energy, repetition rate, pulse width
MPL-S-1030 is a 1030 nm Pulsed laser. Q-switched Infrared Laser. Key specifications: operating mode Q-switched, output / average power 1~450 mW, pulse energy 1~70 uJ. View specifications, datasheet and enquiry options from Precisometer.
Specifications
20 specification rows
| Operating mode | Q-switched |
|---|---|
| Output / average power | 1~450 mW |
| Pulse energy | 1~70 uJ |
| Beam / notes | Q-switched Infrared Laser |
| Power stability (rms, 4 hours, ±3°C) | <5%, <3%, <2% |
| Transverse mode | TEM00 |
| Beam diameter at the aperture (mm) | ~1.0 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-SR |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 1030±1 |
| Single pulse energy (µJ) | 1-703 |
| Pulse duration (ns) | ~0.6 |
| Peak power (kW) | 1.6-116.6 |
| M² | <1.5 |
| Beam divergence, full angle (mrad) | <1.5 |
| Pointing stability (μrad) (over 2 hours after warm-up and ±3°C) | <50 |
| Pointing stability over temperature (μrad/°C) | <8 |
| Warm-up time (minutes) | <10 |
| Beam height from base plate (mm) | 19 |
Application context
Typical uses for this laser type, with the selection logic tied to the model record.
MPL-S-1030: 1030 nm emission determines compatible optics, coatings and detectors for Optical instrumentation. The catalogued beam parameter (TEM00) helps predict how the source will focus and propagate through the instrument.
MPL-S-1030: Laboratory measurement benefits from a stable, focusable source. 1030 nm emission fixes the compatible coatings and detector response, while the listed beam characteristic (TEM00) informs waist size and propagation.
System integration
Use these checks to connect MPL-S-1030 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Operating temperature (℃): 10-35. Provide the stated cooling method and keep the laser-head base thermally coupled; temperature drift moves wavelength, output power and beam pointing.
Transverse mode: TEM00 · Beam diameter at the aperture (mm): ~1.0. Size the downstream optics from the stated beam diameter and divergence rather than from the aperture of the housing, and confirm the polarisation state before specifying isolators or polarising optics.
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Model selection
Compare MPL-S-1030 with the closest available models in the Pulsed Lasers family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MPL-S-1030 (current) | FS-H- 1030A | FS-H- 1030B |
|---|---|---|---|
| Wavelength | 1030 nm | 1030 nm | 1030 nm |
| Optical power / pulse energy | 1~450 mW | 1-500 mW | 500-3000 mW |
| Operating mode / pulse width | Q-switched | Pulsed | Pulsed |
| Beam quality | TEM00 | TEM00 | TEM00 |
Compare the MPL-S-1030 with nearby pulsed lasers across the wavelength range.
Choosing a laser
Which specifications decide the experiment, and which ones cost money without changing the result.
PhotonicsLinewidth, spectral width, RIN, M², and coherence length answer five different questions. Translate each into the units your experiment is designed in — and learn which ones not to pay for.
Open guide
Photoacoustic imagingConnect optical absorption to wavelength, pulse fluence, stress confinement, acoustic bandwidth, repetition rate, and synchronization at the sample.
Open guide
Ultrafast spectroscopyDesign the pump, probe, delay line, monochromator, visible or SWIR camera, synchronization, and transient-signal budget as one experiment.
Open guide